How to make a doll from nylon stockings yourself

Toys made from nylon tights: ideas for creativity

Original doll
Nylon tights are not only clothing, but also an excellent material for beautiful and unusual crafts.
Why nylon? The answer is extremely simple. Based on it, you can easily make all the fine details on the toy, giving it realism. The fabric is very elastic, and this is the most important advantage in such crafts, since you can easily deform the workpiece and carefully trim it. There is no need to embroider a lot on the toy; you can simply give it shape with auxiliary parts. If you approach your work with special diligence and perseverance, you can create a wonderful interior element for your home or a wonderful gift for family and friends.

Required materials and tools

To create a doll with your own hands from tights you will need:

• plastic bottle (any size at your discretion);
• strong wire that can be bent by hand (aluminum or copper);
• scissors;
• PVA glue;
• nylon tights (pre-boiled);
• a set of flesh-colored needles and threads;
• multi-colored scraps of fabric to create clothes for dolls;
• filling for dolls (sintepon, holofiber, synthetic fluff);
• knitting threads (they are needed to make hair for future dolls);
• acrylic paints;
• small buttons.

Materials and tools

Preparation of nylon

Before you start making a doll from nylon and padding polyester, you need to process the main material - nylon. First you need to learn how to boil tights. This gives the nylon greater elasticity and softness.

Step-by-step description of actions:

1. Add 500 mg of bleach per liter of water. The pan with the solution must be placed on low heat.
2. Tights must be dipped into the solution and boiled, stirring them in boiling water for 15 minutes.
3. The color will change over time, so after 15 minutes of cooking they will have a pinkish tint to yellow.
4. It is necessary to remove the contents, place them in another container and rinse with running water and conditioner (for softness). Let it sit for 15 minutes.
5. Gently squeeze and then dry the tights. The result is lighter, softer and more elastic tights, ready for further use.

Note! In order for the color to be evenly distributed, it is advisable to cook only one pair of tights, maximum two. It all depends on the frequency of stirring and the concentration of bleach in the water.

How to make a doll from nylon tights and a plastic bottle

A doll made from nylon tights and a plastic bottle is one of the main ways to make a toy. For beginners, the bottle will help determine the shape of the doll.

You might be interested in Making a slime base - recipe options

DIY pantyhose dolls step by step instructions:

1. You should cut the plastic bottle into two parts. One will serve as a model for the head, and the second for the body.
2. Wrap most of the bottle with padding polyester. The material should fit tightly to the bottle.
3. Pull tights over the bottle. The size of the tights should be enough, but you need to pull them on carefully.
4. Roll out a relatively small ball and place it under the nylon.
5. Tie off the part of the tights that will get in the way in the future. Pierce the upper part of the nose with a needle and, tightening the thread, create a bridge of the nose.
6. Pierce one side of the nose from the top to create a nostril.
7. Do the same actions with the second nostril, see if you get the same result as in the picture.
8. Make the wings of the nose by inserting a needle through the left and right nostril.
9. To make the shape of your nose more natural, do several of these manipulations.
10. Pull the upper part of the nylon a little and put a little padding polyester in the place where the forehead will be located. Then tie the top of the tights again.
11. Pull up the bottom of the tights to carefully push the stuffing into the intended place for the cheeks of the future doll.
12. Do the same actions with the chin of the toy to create a full face shape.
13. Pierce the approximate location of the beginning of the mouth in the left corner and move to the right corner. The mouth will be expressive.
14. Tighten your lips a little to make them more realistic and beautiful.
15. Apply drawstrings to highlight the shape of the cheeks.
16. The chin is also an important element of the toy’s face; it needs to be highlighted in the same way as the cheeks.
17. The doll's eyes can be purchased at a hardware store or taken from an old doll. You can also make your own from plaster.
18. Use PVA glue to glue the eyes to the face.
19. Now you need to make the eyebrows. To do this, you will have to pick up the needle and thread again.
20. The left and right eyebrows should be brought together with a few stitches.
21. Now you can paint the doll. To do this more carefully, it is better to use cosmetics.
22. Pull the remaining end of the nylon tights onto a thread and pass it inside the bottle.
23. Pull the upper end of the tights from the body through the neck of a plastic bottle.
24. Tighten both edges of the nylon.
25. The rest of the decor is up to taste and color. The basis for the hair is knitting threads, and the finished wig can be sewn or attached at your discretion.
26. Make a hand blank from wire and wrap it with the available material. Put tights on the doll’s hands in the same way as on the bottle earlier. Sew the arms to the body.
27. Clothes for the doll depend on the imagination of the performer.
28. The doll is ready. You can put it in any place in the house, the main thing is that it always pleases you with its appearance.

Doll made from nylon tights

Secrets of tightening the face and shaping the doll's facial expressions

To gain experience, a novice needlewoman needs to practice a lot. A beautiful toy is always nice to look at, but it costs time. You can simplify your work by learning the little secrets of making the doll more lively and realistic.

Note! It is recommended to watch Irina Starkova’s video and learn all the subtleties of the formation of facial expressions.

Doll face with different facial expressions

Rooster made of nylon

This toy is made in the same way as a stocking doll. But since a cockerel is a bird, and a special one at that, the needlewoman will need to highlight the beak area . This is done using ties and stitches.

Additionally, instead of hair, you will need to sew a comb to your head, sewn separately and stuffed with a small amount of padding polyester. At the bottom of the head you will need to make 2 beard pieces and sew them under the beak.

The wings can be made stuffed from material and padding polyester or using a frame using the technology of making a stocking doll. It is worth paying attention that the rooster always has bright plumage, so the details should be of rich colors.

It is advisable to make the rooster's feet from wire, wrap them with padding polyester, and separate the fingers with drawstrings. They can be painted bright red. Decor for the rooster: hat, saber and corresponding paraphernalia.

Master class on making nylon dolls in pictures

A step-by-step MK in pictures will help you learn more about the technique of making dolls with your own hands from tights.

Step 1 – preparing a plastic bottle

Step 2 – wrap the bottle with padding polyester

Step 3 – pull the tights over the bottle

Step 4 – place a small padding polyester ball under the nylon

Step 5 – shaping the nose

Step 6

Step 7

Step 8

Step 9

Step 10

Step 11

Step 12

Step 13

Step 14 – forehead design

Step 15 – shaping the cheeks

Step 16 – shaping the chin

Step 17 - mouth design

Step 18 – shaping the lips

Step 19

Step 20

Step 21 – cheek tightening

Step 22

Step 23

Step 24

Step 25 – doll's eyes

Step 26 – glue the eyes with PVA

Step 27 – eyebrow shaping

Step 28

Step 29

Step 30

Step 31 – coloring the doll

Step 32 – place the end of the tights inside the bottle

Step 33 – pull the upper end of the tights through the neck of the bottle

Step 34 – Tighten both edges of the tights

Step 35 – hair for the doll

Step 36 – Making the Hands

Step 37 – sewing clothes for the doll

Step 38 – dressing up the doll

Butt made of nylon tights

The name of the doll exactly matches its description. It will decorate the interior and bring a lot of laughter to everyone who sees it.

You might be interested in Basic rules for crocheting a giraffe toy

Master class on how to make a butt from nylon

Making a doll begins with the face:

1. Foam rubber or any other material used as a filler must be disassembled into several parts. Decide on the size of the head, nose, chin, lips and cheeks.
2. Then, starting from the head, put the raw materials into already prepared nylon tights (preferably stockings). Determine the location of the nose. Place cheeks on the sides. There should be a lump of foam rubber under your nose for your lips.
3. Pull off the tights and wrap the thread around the hole so that the foam does not come out. You should get a blank for the head, like a ball on a string. The remaining nylon can be trimmed so that it does not interfere with work in the future.
4. To start tightening your face, you need to take a needle and thread and secure the thread to the resulting “tail”.
5. You should start tightening from the nose. To do this, you need to press the lump with your nose with your fingers and bring the needle forward.
6. Make several ties for the proposed bridge of the nose. When the bridge of the nose is ready, make nostrils for the doll.
7. Pierce the area for the wings of the nose and remove the needle in the cheek area. Next, move the needle up, the shape of the cheeks should be immediately visible. Make a small indent and bring the needle out in the same way, but downwards and secure the drawstring with a knot.
8. Do the same with the second cheek, first passing the needle to the other corner of the mouth.
9. By the way, about the corners of the mouth. While the cheeks are being tightened, they will already be visible, so there is no need to determine the size of the lips.
10. Stretch the thread from left to right so that the doll’s smile is visible. It must be remembered that the thread must be sufficiently taut.
11. Squeeze your face with your hands to secure the tie over your cheeks. Step back a little to thread the needle under the middle of the toy's lower lip.
12. Again, make a small indent to go up to the upper lip. Step back a little and move the needle onto the bridge of your nose.
13. Pierce the bridge of the nose itself and pierce the product from the back, secure all the ties on the face with knots.
14. Cut the thread.
15. It is important not to forget to glue the eyes in place.
16. The final touch is the doll's makeup. The color and shape of eyebrows, shadows, blush on the cheeks and lipstick are at your discretion. The same applies to the wig.

Important! When working with the nostrils, for greater expressiveness, you need to make several ties just above the holes from the nostrils themselves, so that they do not have a round shape, but a more elongated one, like a real nose.

The design of the most important thing of this toy – butts:

1. To do this, make a ball of padding polyester and place it in a nylon.
2. Just like with the face, simply tie the resulting “ball” with a thread. And since this is a part of the body where there is no nose, eyes and mouth, then you won’t have to put anything else in except round foam rubber.
3. Attach a thread and a needle to the tail. Next, simply wrap the ball in half with thread so that it is divided in two. These will be the buttocks.
4. Pierce the base (the same “tail”), press the buttocks to tighten and do the same as in the third step. This way you can give the “soft spot” a shape. The bulge of the butt will depend on the number of tightening steps performed.

You might be interested in How to crochet toy kittens - a selection of patterns

The doll also cannot do without other parts of the body.

Making hands:

1. You don’t need to think long about how to make a doll’s palm - just bend its model from wire.
2. Wrap it tightly with foam rubber and place it in a nylon.

Legs:

1. For the feet, make small blanks from padding polyester: five balls for the toes and the foot itself.
2. Accordingly, sequentially place the toes and the foot itself in the nylon.
3. Fasten the thread to the place where the entire structure is tied.
4. Bring the thread to the thumb, more precisely to its hollow, from where it grows.
5. Throw the thread back and tighten at the cleavage.
6. The remaining fingers are embroidered using the same technique as the first. In this case, it is necessary to make small indents so that the fingers do not merge into one whole.
7. When the last toe is formed, the needle should be pierced to the side, indented towards the big toe upwards and the needle should be brought out in the center of the foot.
8. Pull tightly and secure the thread at the base with a knot.

Next, you can sew clothes from any materials you like, sew ready-made arms, legs and head to the body.

Pop doll

How to make a pop doll can be seen in the video at the link

.

Master class for beginning craftswomen

To begin with, you can make a simple tumbler from nylon and padding polyester (holofiber). The product is soft and has a round or oval shape. It is easy to make and does not require special skills.

Corpuscle

• cut off the part with the toe and heel of medium length from the tights (tights for dolls can be replaced with stockings or socks);
• stuff it with holofiber or padding polyester and sew up the edge of the product;
• sew the neck area with a “forward needle” seam, wrap it with thread several times and fasten;
• from below, in the area of ​​​​the seam of the sock, insert a needle and, stretching it inside the blank, pull it out in the center, in the navel area, make a stitch, and then return the thread in the opposite way and fasten it;
• we form the legs. Select two balls at the base using an overcast stitch;
• In the same way we “sculpt” the face of the craft. For the nose we sew a circle with a smaller radius. And for the ears, we separate small parts on the sides of the head and tie them together with thread at the base;
• for the handles you need to take two narrow strips of nylon, fold each in half and sew, leaving a hole at the base. After stuffing, they are sewn to the body.

Note!

• Kinusaiga technique for beginners: what is it, a description of creating paintings from threads

• How to weave a figurine from rubber bands: how to learn to weave animals, toys and what you can make from rubber bands on a slingshot

• How to make flowers with your own hands from paper, fabric and scrap materials. We create bouquets of homemade artificial flowers

Head

Now we design the face, depending on the intended image.

• mark with dots the place for the eyes and mouth;
• embroider eyelashes with three black stitches (shorter for a boy, longer for a girl);
• draw the mouth with acrylic paints or embroider with red floss threads;
• stick a needle with a threaded bead in the place for the eye, and then bring it out from the inside to the corner of the mouth and pull it a little. You have created an eye and a cheek at the same time (repeat the manipulation on the second half of the workpiece’s face);
• cut off the stocking tail from the top of the baby doll, and sew a wig from yarn instead;

Cloth

Select textiles for the stocking doll's outfit at your discretion.

Important! Due to the special structure of the tumbler, its body is first dressed, and the sleeves put on the handles are sewn separately.

The step-by-step photo instructions show the execution of the toy in stages.

Tumbler dolls

Tumbler dolls are cute and miniature toys made of nylon. Working on them is great practice for beginners because you don't have to worry too much about them. To create dolls, any thickness of nylon and even socks will do. They are made according to the same principle as described in the section “How to make a doll from nylon tights and a plastic bottle.”

Tumbler doll

Complete assembly of the toy

For every needlewoman, this is the most enjoyable stage of work. The toy already has its own character, it is expressive. At this very last step of the work, the master class on making dolls from nylon tights will be completed, and the craftswoman’s work will have its own life.

Assembly order:

• Sew arms and legs to the doll's body; if the hands and feet were made separately, then they also need to be connected.
• Dress up the toy.
• Attach the head.
• Mask all connecting seams and add the final design touches.

The toy is ready. A doll from tights can be made step by step with your own hands within a few hours; the most difficult thing about it is the expressiveness of the face and facial expressions. It is also necessary to understand exactly what kind of image the craftswoman wants to create, and to have an understanding of proportions.

Frame dolls made of nylon tights

These stocking dolls can differ only in their sizes. In frame toys, the emphasis is placed not only on the head, but also on other parts of the body. The word “frame” in the doll’s name speaks for itself.

How to design a face is described in detail in the sections above. Now you should learn how to make the basis for the doll - its frame. First you need to draw a layout that will help you determine the size of the toy.

Model of the future toy

For the frame, the wire must be sufficiently flexible and dense: it should not break from the tension between two nails.

Wire for frame

The result is a very stable structure, and you can bend the wire with pliers if you want to make the doll stand or sit in different poses.

The frame can be given different shapes

Attaching the head to the frame

The wire frame should be wrapped in padding polyester and the tights should be carefully pulled on.

Frame wrapped with padding polyester

All that remains is to sew the details on the body and the body of the doll is ready.

Wireframe policeman

An additional convenience in a frame doll is the ability to change clothes, since they will not be sewn to the head, arms or torso.

Homemade toys made from tights will bring joy and delight from what you have made with your own hands. You can try to make Kuzya the brownie, baby doll, and soldier in a similar way and add these wonderful products to your own collection of dolls.

Pops

Dolls made from tights received this comic name because of the outstanding size of their butt and face. The trick to the craft technique is that the feet, butt, hands and head are attached on top of the clothes.