How to cut the bottom of jeans and make fringe top 10

First, recommendations

First you need to find a victim, which jeans to cut.
The fabric should not be stretchy; it is better to choose classic thick denim. In the future, this will help create a beautiful fringe or even edge, and the shorts will fit snugly without losing their shape. Don't rush to cut off the pant leg. Measure twice and cut once, so the saying goes. Try on your jeans in front of a mirror, walk around in them a little, outline the length of the future product with a small margin (2-3 cm).

Important! Before cutting off the pant leg, turn the pockets inside out to avoid damaging them. It is better to cut jeans on a hard surface, sit on the table, prepare everything you need:

It is better to cut jeans on a hard surface, sit on the table, prepare everything you need:

Tailor's scissors (can be stationery);
Small nail scissors (for decoration and fringe);
Ruler;
Pencil or piece of dry soap;
Decorative elements;
Threads and needles.

To make the shorts symmetrical, first cut off one leg, then fold the jeans in half and cut off the second part. “Voi la” - done!

Cutting women's jeans to fit shorts

If you don't have suitable jeans in your wardrobe, you can buy a new pair at a second-hand store.

How to cut jeans into men's shorts beautifully

In summer, denim shorts are a basic item in a man's wardrobe. They go with t-shirts and shirts and are easy to make from tired old jeans. The optimal length is up to, mid or just below the knees. The capri model (to mid-calf) has not been in fashion for a long time, because... hides height and adds weight. Try on the jeans and mark the desired length, leaving a couple of centimeters for cuffs or hems. Take off your jeans and sit on a flat, hard surface. If you want to leave the edge frayed, it is better to make a small cut and tear the fabric to remove the excess. This way the edge will immediately have fringe.

If you plan to make shorts with cuffs, then it is better to cut the jeans with scissors. Then try them on and tuck them in front of the mirror to the desired length, pin them in place, remove them and iron them. To prevent the edge from unraveling, use double-sided adhesive web fabric. Place it between the folded part and the trouser leg, iron it with an iron, under the influence of heat, it will melt and stick the lapel.

Which jeans can be cropped?

The answer to this question depends on what you want to turn them into. First of all, pay attention to the material. If you want to achieve torn fringe at the cut site, the denim should contain no more than 50% elastane, otherwise it won’t work. The coarser the fabric, the better.

Also pay attention to the style and cut, because the final result depends on this. For example, flared jeans have different widths on different parts of the leg, which must be taken into account when choosing the length of the final product.

Trendy “star” shorts made from old jeans

An interesting way to create bright, trendy shorts from old denim trousers is to apply chaotic and shapeless blots, the composition of which creates the visual effect of starry outer space.

Pocket with star

This design should be used on dark jeans. To complete it you need:

multi-colored acrylic paints on fabrics;
aqueous solution of bleach.

This colorful decor is beneficial because it allows for a wide range of imagination and creativity.

Once the jeans have reached the desired length, the creative process begins. It is most rational to carry out painting on the floor, having previously covered it with film or other coating that does not allow paint to pass through.

First, using a sprayer, the shorts are sprayed with white, diluted in water, randomly, in different places. Spraying this solution should not be done very generously. Once the faded purple stains appear on the black denim, they can be sprayed with white again for a stronger “eating away” of the color.

Who said that the cutting line must be straight?

These waves can be created by circling a shampoo cap.

Cut along the circled line and your chic shorts are ready!

Then you need to move on to working directly with paints. They can be mixed with each other to obtain a variety of shades, or use pure colors. Dip a sponge into the paint and apply it around the existing faded blots on the shorts. The applied colors need to be changed periodically.

To create stars on the “space” denim, you can use a toothbrush. To do this, the brush is immersed in white paint, and then small, numerous dots are created from the bristles by spraying the paint with your finger. Individual parts of the shorts can also be highlighted with a more intense white color.

Making ripped shorts from whole classic jeans

Using a utility knife, make several cuts on the product and pull out the threads from the fabric

Half an hour of work and you have something new in your wardrobe

Please note that the holes will only get larger as you wear and wash them.

Don’t get too carried away with fraying the threads, otherwise you won’t have anything to wear anymore.

Fashionable shorts

After complete drying, the shorts are turned over to the reverse side and decorated in the same way. You can create a “star” decor only on the front. The product should be left for at least a day to allow the paints to set and dry completely.

How to make shorts from old jeans

Making shorts from old jeans is easy if you already know how to cut and hem jeans. To do this, you just need to move the shortening line of the jeans above the knees, try on the shorts and adjust their length. And then hem the cut edge of the denim with a double hem.

Hand made is always in fashion

Hand made is always in fashion, and this season is no exception. Therefore, if you have the desire and creative potential, and creative ideas are supported by the ability to hold a needle in your hands, you can safely get to work and make, for example, out of the most ordinary, rather boring jeans, a trendy option for this season. But before you implement your design ideas, it’s worth finding out which jeans models will be trendy this season.

Let's start with the styles. Popular today are flared jeans, MOM, boyfriends, and bananas. Ultra-tight skinny jeans are also keeping up with fashion trends. Banana jeans and riding breeches also returned to the catwalk.

Fringe

The disadvantage of this method is that you will have to patiently pull out the threads, and in the end you will end up with a model that may go out of fashion next season. In addition, the fringe does not retain heat and gets tangled in the shoe fastener.

The advantage of the method is that it is definitely a fashionable look.

How to make fringe with your own hands:

From the intended fold line, set aside as many cm as you want to have in the fringe. Draw a second chalk line.
Using the new marking, sew a stitch using a machine or by hand (back-needle stitch). The threads should be as close as possible to the tone of the fabric and thin.
Trim the factory hem and open the side seams to the stitching.
Using a needle, carefully pull out transverse lines, starting from the center of the pant leg and moving in a circle.
Iron the fringe and trim with scissors if necessary.

Thus, there are at least 5 ways to cut jeans. The most difficult thing to do is to do it on a typewriter, but the result is the most durable and beautiful. The fastest option is a hidden seam or fringe. In any case, the more often you have to shorten your jeans, the faster and more dexterous you will get, but it is better to buy trousers according to your height.

What you need for work

The most important tools for work are chalk, ruler and scissors.
REFERENCE. The ruler can be replaced with paper tape.

All other devices depend on what you want to get in the end. For example, to unravel the fringe you will need tweezers. A gypsy needle will help you release threads from entire sections of fabric. If you need a more formal version with a hemmed edge, you won’t be able to do without sewing pins, an iron, thread and a sewing machine.

!— Yandex.RTB RA-461895-3 —

—>

How to Hem Jeans Without Cutting Them

You will need:

threads to match the fabric being hemmed;
needle;
scissors;
ruler;
tailor's pins;
tailor's chalk;
iron.

We recommend: Basic rules for brushing teeth and important nuances of the process

Step-by-step instruction:

Put on your jeans and mark the length to which you want to shorten them.
Fold each pant leg outward without cutting it and secure it with tailor's pins.
When tucking, make sure that the crotch seam lines up exactly with itself at the top of the legs.
Sew the pant legs directly under the bottom factory seam - so that your threads are “hidden” under it.
Fold the resulting fold inward and iron the product with an iron.

For hemming jeans this way, a backstitch stitch is also suitable. But you will need to make another seam on the inside of the legs so that when putting on the product, the leg does not fall into the resulting “pocket” inside. To do this, you need to carefully sew the fold using a “blind seam”. You need to do it like this:

First, iron the pants and prepare the thread and needle.
Insert the needle into the edge of the fold created inside the trouser leg after hemming.
After this, grab a little fabric (1-2 mm) from the other part of the leg, inserting the needle exactly opposite the place where you inserted it into the fold for the first time.
Now you need to grab a small section of the fold again, exactly opposite where the needle came out of the pant leg.

By making a seam in this way, you will carefully pull the resulting fold inside the trouser leg towards itself. When the jeans are put on, the leg will not cling to anything inside them.

How to trim: 3 ways

So, you’ve chosen the right jeans, decided on your goal, prepared your tools, and it’s time to get down to business.

To make it fashionable

The principle of freedom suggests that even the creation of fashionable things should be as simple as possible. And, perhaps, there is nothing easier than updating old jeans by cutting them off at the bottom. To do this you need to do the following:

Put on your jeans and in front of the mirror, mark with chalk the length you would like to keep.
Place them on a flat, hard surface: this could be the floor, table or ironing board. Smooth the fabric to remove any wrinkles or uneven surfaces.
Attach a ruler or tape to the mark you made earlier and draw a cutting line with chalk. In order not to waste extra time, this can be done with only one pant leg.
Carefully cut the pant leg along the line with scissors. Don't touch the second one yet.
You will be left with a piece of cut fabric. Attach it to the second leg, draw a line and repeat the previous step with it. This method eliminates the possibility of making one shorter than the other.
All that remains is to fray the edges and run your fingers “against the grain.” You can also additionally use a razor.
Wash the jeans and, after drying, ruffle the edges again.

And to simplify the process even more, you can remove the ruler from this sequence. Fashionable deliberate sloppiness not only allows for this, but even requires it. The more unevenly you cut, the better, the main thing is not to try to hide it.

To keep the factory stitching

However, not all fashion trends support such freedom. To create something in a classic or business style, you still need certain skills. For example, if you bought jeans that are too long and would not like to spend money on a tailor, you can hem them yourself, preserving the factory stitching.

As in the previous version, measure the required length and draw a line with chalk. The difference is that this must be done on both legs.
Align the new hem line with the decorative stitching to create a fold on the reverse side. Pin the hem together.
Using a sewing machine, sew a stitch, precisely aligning the side and inside seams.
Trim the jeans with scissors, leaving an allowance of approximately 1.5 cm.
Lower the hem down and use an iron to lift the seam allowance up.

REFERENCE. This method is suitable for a regular fit style with a straight cut.

To make shorts

You can turn jeans into shorts using any of the previous two methods, the only difference will be the length. But there is a third one, with a fashionable fringe:

Cut the jeans to the desired length, as in the first method.
Using tweezers, pull out the white threads. If you are working with a skinny style, do it especially carefully so as not to get puffed.
Use your fingers to fluff out the resulting fringe.
Wash your jeans. Once dry, comb the fringe using a comb.

This is the simplest thing you can do with ordinary jeans, but the scope for imagination is enormous. You can add holes or scuffs, or vice versa, sew on additional decorative elements. Fortunately, fashion in 2021 allows this.

Fashion trends

This season, many fashion designers are offering sophisticated jeans models decorated with fringes.

This decor should not immediately attract attention, but should give the product sophistication, charm and charm. Even the edge of jeans with a small fringe will add style and originality to the model.

Marques' Almeida presented a stylish denim suit, which consists of jeans with fringes and flares from the knee and a short jacket. In this outfit you will definitely be the center of attention. Roberto Cavalli, who loves to use a lot of decorative elements, presented the public with bright high-waisted skinny jeans. They are embroidered with beads and fringe

The silver color adds richness and charm to the model. If you like bright colors, then these Polo Ralph Lauren jeans are sure to catch your eye. They have a bright yellow color, and the legs on the sides are decorated with rich orange fringe. Devon Halfnight presented an interesting model of jeans with a classic cut, where fringe adorns only the bottom of the legs

The product looks stylish, unusual and attractive.

"Bachelor" method

Unmarried men came up with their own quick way to shorten jeans without a sewing machine. This life hack has become popular among the fair sex. After all, thanks to him, nothing needs to be sewn. Its main feature is simplicity and originality. To do this, you must fulfill the following conditions and actions:

iron the jeans twice to the desired length;
the second time you need to add one centimeter;
trim excess material;
Using Moment glue, coat the first hem from the inside;
carefully wrap it inside and press it, hold it for several minutes.

All similar actions are performed with the second leg. This old method helps to shorten trousers without hemming and keep them that way for a long time.

Shortening denim pants with glue

How to hem jeans by hand without a machine without cutting off the bottom of the legs

Hemming jeans without cutting the bottom is quite possible even with a thread and a needle. To do this you need:

put on jeans and mark the desired length;
tuck both trouser legs outwards and secure with tailor's pins;
The crotch seam must line up exactly with itself on the top of the legs;
stitch the trouser leg under the bottom factory seam to hide your stitching;
roll the resulting new fold inward and iron it with an iron at high temperature.

When hemming jeans in this way, you can use a “back needle” stitch. You will need to make another seam on the inside of the legs so that the leg inside does not fall into the resulting “bag”. Sew the fold using a “blind seam”.

How to cut jeans at the bottom for a fashionable fluff

Denim fabrics have a twill or diagonal, very tight weave. The vertically directed warp threads are dyed, the horizontal weft threads are light in color, so the front and back sides differ in color.

for classic and short shorts, it is better to use only natural denim, since elastic fabrics pinch the thigh, which does not look aesthetically pleasing;
when planning the length, it is better to leave an extra 2 cm and then cut it off if necessary, rather than immediately cutting it too short;

How to cut jeans at the bottom for a fashionable fluff

2.How to cut jeans by hand without a machine?

The lack of a sewing machine, of course, limits experiments with sewing clothes and accessories. But as for jeans, you can hem them by hand. To do this, simply follow the step-by-step master class.

Necessary materials:

jeans;
scissors;
ruler;
needle;
chalk;
threads;
pins;
sandpaper (if you need to create a scuffed effect).

First, you need to try on your jeans to determine the appropriate length. Immediately apply a mark using chalk or a pin. You can also turn the jeans inside out and attach other jeans of the correct length to them. That is, we put a mark on the other leg.

At the level of the mark, draw a line parallel to the bottom edge.

We step back a few centimeters from the mark and draw another line.

Fold the two legs so that the side and crotch seams, as well as the bottom edge of the jeans, completely match. Trim both legs along the bottom line.

Fold the edge inward approximately 1.5 cm. If the jeans are too tight, you can iron them for convenience.

Fold the edge over again, secure with pins and baste with thread. We repeat the same with the other pant leg, after which we remove all the pins.

We thread the needle and tie a knot. We hide it under the hem and sew the edge with a simple seam forward using a needle. It is very important to make the stitches approximately the same so that the resulting work is neat.

After the first round we proceed to the second. We make another seam forward with a needle, closing the gaps between the previous circle. When the seam is ready, remove the basting. To achieve a scuffed effect, sand the edge with sandpaper.

Shorts with lace

This delicate element of decoration looks very stylish in tandem with rough denim.

In order to decorate the product, you need to cut out triangles on the sides of the shorts, cover these cutouts with lace of the appropriate shape and sew them on using a needle and thread.

You can also line your pockets with this decoration.

The lace sewn on the bottom of the shorts looks original. To do this, you need to sew the selected braid along the inner bottom edge so that it peeks out about one and a half centimeters.

You can turn old, rather boring jeans into fashionable ripped shorts with your own hands. All you need is imagination. You will have to use only available materials. When choosing shorts in a store, it is not always possible to choose an option that fits perfectly in shape, length and color. When making this thing with your own hands, you can take into account all the nuances and make your dream come true. The skills of a professional seamstress are completely unnecessary for this process. With just a little effort, you can add stylish new shorts to your wardrobe.

The question of giving new life to old jeans and making fashionable shorts out of them is relevant for every girl who has at least one pair of unnecessary, worn trousers lying around in her closet. But many people have some difficulties with design options for a new product. We bring to your attention creative ideas for creating unique women's shorts from old jeans with a unique design.

LiveInternetLiveInternet

Very practical tips on sewing denim from the blog “Vilvetkin’s Handicrafts”. Author's words. I often sew from denim and always want the seams to look as “factory” as possible. Alas, it is not possible to imitate a factory double stitch on a household sewing machine, but it is quite possible to make a decent double stitch. Many who have tried to sew with special denim threads have encountered difficulties - the machine skips stitches, loops on one side of the fabric, etc. It happened to me too. But then, after scouring several sewing forums, I found a number of tricks that finally reconciled my machine with thick denim threads. The first trick is threads

A thick decorative thread is used only as the top thread; we thread a regular thread into the bobbin, for example, reinforced linen-lavsan thread No. 45. The upper thread tension needs to be loosened a little. The second trick is the position of the needle. Most often, the problem of sewing jeans is skipping stitches on thick spots, for example, when hemming jeans at the seams. This happens because the needle does not have time to pierce the thick fabric. As a result, when the needle and the top thread enter the shuttle, it has already turned and the top thread does not catch on the bottom thread. In order to avoid this, you can place the needle a little lower! Not all the way! I know the idea sounds seditious, I was always taught to insert the needle all the way, otherwise... well, something terrible and irreparable will happen to the machine. But no, everything turned out a little wrong.

Here is the needle position in my machine when sewing jeans. And no missed stitches!!! The third trick for an even delay is a foot with a guide. These feet are called differently by different manufacturers, but the essence is the same - the presence of a guide, the position of which can be adjusted.

I have this one. Naturally, the elastic band is not included. This is my copy that has become loose from long use :)) The stitching is done sequentially. Those. First, the seam is close to the edge, then the second is parallel to the first. To ensure that the stitching width is the same throughout the entire product, while sewing the first decorative seam, I mark the stitching width directly on the foot. In this case, the red dot corresponds to the first line, the blue dot to the second. Very comfortably. And finally, not tricks, but rather reminders: Jeans are sewn with a thick needle No. 100, preferably a special denim one. This needle has a special tip shape that makes it easier to pierce thick tissue. A fairly well-known trick, but repetition is the mother of learning. If you need to sew a thickening, for example, a place where several seams intersect, you should try to make this place thinner - steam it with an iron or soften it by beating it with a hammer. Do not overdo it with the hammer, otherwise you may damage the fabric. When passing through a thickening at the moment when the foot hangs in the air, clinging to the thickening, and the needle is already piercing a thin area, skipping stitches and a violation of their length may also often occur due to the fact that the foot is not pressing the fabric at this moment. With such a transition, you can pre-place under the thinner section paper folded in several layers, equal in height to the thickening. Of course, next to the seam, just to give support to the foot. When the foot passes the thickening and completely moves to the thin area, you can remove the paper and continue sewing as usual. Good luck with your denim sewing! I hope these tricks will save you stress and time. For inspiration

Decoupage

Today in stores there are special adhesive compositions, decoupage cards, drawings on paper intended for cutting and gluing, and sets of paper napkins.

There are general rules for decoupage on denim.

With the help of decoupage you can create very original decors on products made from denim fabrics. The only peculiarity is that there is a need to use a special thermo-adhesive film on protective silicone paper and a special fastening adhesive for fabric, thanks to which items decorated in this way can then be machine washed at low water temperatures.

Before work, in all cases, even if the clothes are new, they must be washed and dried to facilitate the saturation of the fabric with glue.

To work in the decoupage technique, be sure to use soft brushes with artificial or natural bristles (kolinsky).

A hard brush can damage the thin layer of paper towel.
In addition, rough bristles leave streaks, which detracts from the appearance of the work.
We must not forget that denim is always a darker color than napkins, so the patterns should be selected as bright and light as possible.

Decoupage from napkins

There are two ways to glue cut-out napkin designs to fabric.

Option No. 1 , using hot-melt film on protective silicone paper. This is the easiest way to decoupage fabric.

Prepare a drawing. Choose a paper napkin, preferably with a large pattern, separate the layers (mostly napkins are three-layered) and separate the layer with the pattern. Place a thermo-adhesive film with protective silicone paper on the back side of the design (film to the back of the napkin) and carefully iron it over the paper with an iron without steam. After gluing with thermal film, the pattern becomes much denser, which greatly facilitates the cutting process.
Cut out the design and then remove the protective layer of paper from the thermal film.
Glue the design to the jeans. To do this, a design cut out of a napkin is placed on the wrong side of the jeans, that is, with thermal film glued to the jeans, covered with a clean cloth and ironed with a hot iron without steam, holding it in one place for several seconds.
Strengthen the cut out design. Apply a layer of special clear acrylic fabric adhesive only to the cut-out design, being careful not to stain the denim around it, as any other adhesive is not guaranteed to be wash-resistant. Allow to dry thoroughly for about a day. Transparent acrylic textile adhesive is water-based and has a liquid consistency. Used for gluing paper napkins to textiles and silk.

Option No. 2, using acrylic glue.

The most difficult step in this method is the moment of gluing the image to the base.

Prepare a drawing. Just as in the first option, first select a paper napkin, then divide it into layers, separate the layer with the pattern and cut it out.
Glue the design to the jeans using transparent acrylic textile adhesive , which is water-based and has a liquid consistency. The glue is applied liberally to the desired area of denim, then a design is placed on it and immediately covered with another layer of glue so that the napkin is completely saturated. After gluing it onto the fabric and soaking it with glue, the napkin pattern becomes rubberized. After this, the glue should dry completely. This usually happens within 24 hours.
Strengthen the cut out design. After drying, in order to fix the design on the fabric, the product is turned inside out and ironed with a hot iron in the “cotton” mode for five minutes. If you are decorating a product made of thick fabric, you can iron the design from the front side through thin cotton fabric. In order for items with decoupage to last longer, the product must be washed by hand in water heated to 40°C, using gentle detergents.

Decoupage from fabric

Instructions on how to decorate jeans with your own hands:

Cut out a piece of fabric with the pattern you have chosen and glue it with hot-melt film using an iron. The iron should be hot, but not steamy.
Cut out the drawing. Without removing the layer of protective paper from the hot-melt film, carefully cut out the decorative design. This is necessary in order to give some rigidity to the fabric and facilitate the cutting process. In this case, the cut is more even, that is, without jagged edges.
Glue the cut-out design onto the denim using a hot iron , after first removing the protective layer of paper.
Secure the edges of the applique so that they do not fray during use and fringe does not form. To do this, it is necessary to apply a special relief varnish along the entire contour of the cut-out design, after drying, which preserves the voluminous edge. To make the edge less noticeable, it is better to use a clear varnish or one that matches the color of the application. In order to highlight the edge, you need to choose a varnish of a contrasting color.

When decorating over a pattern on jeans, it is not necessary to apply special fixing glue.

0 Comments

Ways to shorten a pair of jeans

Many denim pants feature nice distressed seams, mostly on the bottom. If you save them, the bending will not be noticeable. Pants can be hemmed in several ways:

By typewriter;
With braid;
With the help of a web;
With cuffs.

The process of taking measurements There is also a creative way of folding pants. It consists in the use of finishing elements. Step-by-step work process:

For finishing you can use various fabrics: real leather, denim material several shades darker;
The seam can also be decorated at your discretion;
You can make cuff cuffs out of white fabric and use colored material for the pocket edging.

A well-made fold while maintaining the hemmed edge helps to fit expensive trousers well, and the finishing gives your favorite trousers a second life and will impress people

It is also important to match your jeans correctly. They match almost any shoes, except summer slippers

Look good with shirts, tank tops or sweaters. Jeans are rightfully considered universal clothing. They are worn in all seasons all year round.

You might be interested in this: Creating a pattern and sewing a women's lace bodysuit

Cuffs on jeans - a tribute to fashion

To look stylish, you need to stick to the “casual” look that is fashionable this season. The practicality and convenience of gateways were appreciated by both girls and boys.

Today, many people cut off their denim pants and wear them. So should I trim or tuck? Young girls can afford cropped, fluffy pants while out and about. To look like a well-groomed, neat girl, it is better to wear neatly hemmed trousers.

How to hem women's jeans? There are three main types of hems: narrow, wide and medium.

Narrow

The skinny look will go well with cropped jeans. Short straight-cut trousers look neat if the legs are folded 3 centimeters.

How to make a hem correctly:

Fold the bottom of the trouser leg 1.5 centimeters.
Then fold the same trouser leg again. As a result, it will be shortened by 3 centimeters.
Pull the pant leg along the seams to better secure the hem.

The legs will be at ankle level or slightly higher. This hem can be done on tight-fitting models.

Average

“Boyfriends” can be folded in another way, which is called average:

You need to retreat 3 centimeters from the edge of the trouser leg.
Fold it to this chosen width.

Smooth the lapel with your hand, then make another hem the same width.

A voluminous lapel is suitable for “boyfriends”, which will make the image a little “casual”. These trousers will look good with a loose-fitting shirt, T-shirts, and long-sleeved blouses.

To create a more feminine look, you should pay attention to an airy blouse and a thin knitted cardigan. The best shoes for this type of wardrobe are those with thick rubber soles, as well as flat soles - moccasins, slip-ons and loafers. Sneakers and sneakers look attractive. Heels are to the taste of the owner of these jeans.

The width of the middle hem of 3-4 cm is also done on girlfriends.

Wide

Long trouser legs are shortened using a wide technique. It is very suitable for “pipe” jeans, “mom-jeans”, and for narrow models.

You need to add 4-5 cm to the seam at the bottom and bend the trouser leg to this length. If the fabric is thick, there is no need to tuck it further. If the fabric is thin, you should do the same hem again.

Fold the second leg in the same sequence. To prevent them from unfolding, but to retain their shape when hemmed once, iron them using an iron. After washing, do this manipulation every time.

It is better not to shorten straight and wide pants, otherwise grace and femininity will be lost.

Should ladies with a pear-shaped figure and short stature make cuffs on their jeans? Stylists do not advise, otherwise the volume will only increase and the silhouette will appear shorter. It is better to narrow the gate. This will make your figure slimmer.

Peculiarities

A new trend this season is jeans with fringes. There is no need to buy a new model, because even old jeans can look new if you decorate them with such stylish decor.

Modern girls really like the opportunity to remake an old model themselves. Not so long ago, ripped jeans were very popular, and now fringe is a worthy alternative to update your favorite jeans.

The variety of fringes gives you the opportunity to show your imagination and find the ideal option for yourself. It can be short or long, go down in threads or look more “fluffy”. The fringe can be along the edge of the legs, along the side seam or even along the legs.

It is an excellent solution for long jeans that need to be shortened.

Life hack: DIY fringed jeans

Jeans are a thing that fashion has no power over.
They can be neither a trend nor an anti-trend: a good pair of blue jeans should be in everyone's wardrobe. Regardless of the season. Choosing jeans that fit well can be quite difficult. Today we will tell you how to make jeans with fringes from an existing pair. And although we have already said that jeans are a basic item, some modifications of them are still more relevant than others. For several seasons now we have been taking a break from skinny jeans (the female half switched over faster than the male half - echoes of this fashion of the 2000s can still be found on the streets), seeing this season “mom” jeans with a high waist and ankle length, as well as various modifications of jeans in the style from the iconic French brand Vetements: as if made from two different pairs and with zippers in the most unexpected places. And also jeans with uneven hems or fringes. We will pay special attention to the latter.

Not only representatives of show business, but also many street style stars are partial to jeans with fringe, as well as to “marginal” denim, combining such a pair of jeans with both casual tops and a more elegant top. Such jeans will “play well” not only in bohemian-style outfits, but will also be an excellent addition to a casual-chic style in combination with sandals or high-heeled shoes.

Before we start shredding and magical transformation, let’s figure out which jeans are best to cut. So:

1 Try on your jeans before cutting. Make sure they fit perfectly and the leg is long enough to withstand the scissor test.

2 Inspect the jeans for stains and abrasions.

3 Carefully check the fabric composition of your jeans: you should not modify a pair if it contains elastane. Just as you shouldn’t choose jeans made from “stretchy” denim, because, despite the deceptive stretch effect, it obviously fits much worse than denim that lacks this property. Jeans (and that's what they are jeans for!) should under no circumstances pass themselves off as leggings.

Now let's move on to the modification itself. You will need: a sharp blade, a piece of soap, a thick needle, scissors and a ruler.

1 First, turn the jeans inside out and cut off the sewn edge.

2 Then, using a blade, we rip off the threads connecting the legs at the edges and separate them.

3 Using scissors, we cut off the sewn edge, and at the same time all the protruding threads (so that the fringe turns out even). Using soap and a ruler, you can mark the desired edge, beyond which there will be no fringe.

4 Using a thick needle, pull out all the horizontal threads from the fabric.

5 On top of the fringe, to secure it, we make one or two thin lines.

Ready! And finally, we invite you to take a look at successful fashionable looks, the basis of which is jeans with fringe:

How to hem jeans and keep the factory seam

Many people wonder how to shorten jeans while maintaining the factory hem? Pants look much nicer when there is decorative stitching along the bottom of the trouser leg. The easiest way to hem any jeans is to trim off the excess, fold the fabric twice and machine a new seam.

Unraveling the threads at the edges

It is necessary to select threads of a suitable tone, but if difficulties arise with this, you can use another method while maintaining the seam. This option is one of the most difficult. It will be very difficult for a novice needlewoman to cope with this work, as it is very painstaking. Before starting, it is recommended to watch at least a few master classes. Below we describe in detail how to hem jeans while maintaining the factory seam.

Necessary sewing tools

To work you need a classic set of tools:

Threads and needles;
Trousers;
Machine or overlocker;
Soap and centimeter.

For a more accurate result, you can ask a friend to help with the hemming. One person will put on jeans, and the other will measure the optimal length of the product. Moreover, the view from the outside is much more accurate than looking in the mirror.

Mark and cut

Put on your pants, put on your shoes and mark the edge of the fold so that it is a few centimeters from the hem line to the ground and secure with pins. Walk in jeans - sit, stand and, if comfortable, mark the cutting line.

Working with a sewing machine

Preparing the cut bottom

Measure the excess, for example 5 cm. Turn the pants inside out, measure half the length of the fold (2.5 cm) from the bottom to the factory hem. Measure 2.5 cm around the circumference of the trouser leg, securing with needles or pins.

Attaching the prepared bottom

Sew the pants along the very edge of the factory hem, measure and trim the excess pieces from the completed stitch, leaving 1 cm. It is necessary to use a blind seam so that pieces of thread do not stick out.

Sewing the bottom

Hem the edges of the trouser leg using an overlocker, turn the trousers inside out and make an invisible seam with yarn to match the product along the edge of the seam allowance and iron it well.

How to iron correctly

With this method, it will not be noticeable that the trousers have been changed in any way, the seam will be neat. But this action can only be done by needlewomen who have some sewing skills and abilities. At the end, if you wish, you can decorate the products with different stripes or beads, add cuffs of white fabric or lace. Some people prefer to do embroidery or dyeing along the edge of the trouser legs. The main thing here is to use all your imagination. Even more decorating ideas can be found on the Internet.

How can you cut the bottom of jeans in a fashionable way or how to properly shorten jeans?

To give an old or new item a more modern look, you can use the recommendations of fashion designers.
Any woman without sewing experience can hem jeans with her own hands. To cut the bottom edge of jeans and leave the fringe, you will need to prepare the following:

chalk and ruler (can be replaced with paper tape);
sharp scissors;
easy to use tweezers.

Using a ruler or tape, you need to mark the border of the end of the fringe. It is recommended to make it to the ankle

It is important to remember that after washing the fringe will become a little shorter

Now you can begin the main stage of work. Surely you know how to cut the bottom of jeans using scissors. This must be done carefully and strictly along the line previously marked on the fabric. As soon as the required number of centimeters of tissue has been removed, we begin to pull out the threads using tweezers. It is necessary to pry off white fibers. You need to repeat the procedure until you get the fringe of the desired size. After washing it should be combed a little.

How can you cut the bottom of your jeans and give them a stylish look? The trend of the year is the jagged edge. To make it yourself, you need to prepare scissors, a pencil with a ruler and a gypsy needle. Using a pencil, mark the boundaries of the legs on the front and back of them. Using a ruler, you need to draw a contour for cutting. For a fashionable effect, it is recommended to use a gypsy needle to pull out a few threads along the edge. The legs with this treatment look especially impressive on ripped women's jeans. This method eliminates the need to use a sewing machine and also takes a minimum of time.

If you are wondering whether it is possible to cut jeans without hemming, the processing method described above is an affirmative answer to this question.

But before you start doing such work, you need to take into account several important nuances. First you need to check the composition of the denim fabric that was used to sew the product. It will not be possible to get a beautiful fringe if the denim consists of more than 50% elastane. Is it possible to cut jeans and not hem them if they are rough? Yes, this material is optimal.

In addition to classic fringe, extravagant fringe looks interesting. It turns out stylish and unusual. To make it, you need to accurately mark the cutting line (you can use a pencil, chalk or a piece of soap). You should add another 20 cm to the finished mark, and then put another mark along which to cut the fabric. We make fringes in the form of vertical cuts (their optimal thickness is 1–1.5 cm).

How can you cut jeans beautifully while maintaining the factory stitching around the hem?

Have you bought classic jeans that turned out to be too long? Shortening them and making them fringed is not the best option (perhaps you plan to wear them to the office at work). In this case, you will be interested in the answer to the question: how can you cut jeans beautifully while maintaining the bottom factory stitching?

How to make holes and scuffs on jeans at home?

To complete this job you will need a standard tailor's kit:

How to create a raw hem on jeans. How to implement

Let's consider two options on how to make fringe on jeans yourself, without going to a sewing studio.

in the first case, unravel the threads from the bottom of the trouser legs to the desired height. This process requires care, because with a careless approach, it will not be possible to restore the denim surface. At the same time, all work is exclusively manual. This method is only suitable for the bottom of jeans;
in the second option, a braid with fringe is made from a separate denim fabric. The finished braid is sewn to the bottom of the trouser legs or as a trim on the pockets. When making jeans with fringe in this way, you will not be able to do without a sewing machine.

When making fringe on denim fabrics, the horizontal weft threads are removed. In this case, the fringe includes only warp threads and looks darker than the jeans themselves. All measurements for shortening jeans are taken from the bottom of the product. This allows you to accurately mark both legs.

Bottom of pants

To make a fringe at the bottom of the legs, you need to decide on the length of the product. On the trousers, mark a level with chalk and add 2 cm, since fringe visually shortens the length.

measure the distance from the bottom of the jeans to the mark using a measuring tape and set aside the same lengths along the perimeter of both legs. Now the marks can be connected along a ruler and thus get the line of the lower edge of the fringe along which the trouser legs are cut;
If the jeans are not shortened, then the hem is ripped out and ironed for more convenient work. If the hem is long enough, it is more convenient to cut;
From the bottom line, measure up a distance equal to the width of the fringe. Place several marks around the perimeter of the trouser leg. The marks are connected by a line that will mark the upper edge of the fringe;
Now you can open the side seams of the jeans to the level at which the fringe begins and cut off the excess fabric so that the fabric of the back and front halves does not overlap;
the light threads of the weft begin to be pulled out, picked up by the sharp tip of the needle. For convenience, you need to place a hard backing made of wood or plastic under the working surface; an old magazine or book will do;
in the finished product, the transverse threads are rarely strictly parallel to the bottom of the trousers. To make the trim the same width, vertical cuts are made on the fabric with scissors every 1.5-2 cm. The cut should reach the line of the top edge of the fringe;
if, as planned, the top finishing line is located at an angle, then the outline is marked with chalk and vertical cuts are made every 0.5-1 cm.

For the length of breeches or shorts

For these purposes, you can choose any out-of-fashion jeans that fit your figure well. For knee-length breeches, both tapered and straight models are suitable. It is good to use stretch and natural cotton jeans at the same time.

Important points when cutting jeans to shorts length:

for classic and short shorts, it is better to use only natural denim, since elastic fabrics pinch the thigh, which does not look aesthetically pleasing;
when planning the length, it is better to leave an extra 2 cm and then cut it off if necessary, rather than immediately cutting it too short;

Work order:

Selecting product length. When planning hems or cuffs, an allowance of approximately 7 cm is left. If fringe is planned, an allowance of at least 2 cm is left. Appropriate markings are applied with a pencil.
Using sharp scissors, cut to the required length, taking into account allowances.
The product is being tried on. A decision is made to process the bottom. Perhaps, when trying on, the desire to make a fringe will change to a desire to bend the bottom of the product or make a lapel. Depending on the decision, the length of the shorts or bridge is adjusted.
The bottom of the product is processed.

Bottom processing options may vary:

With a lapel. The bottom is turned over twice to the front side of the product, the bend of the desired width is fixed with a steam iron.
With a hem. The lapel is made inside the product and stitched on a sewing machine or with a hand stitch.
With fringe. Fringe can be obtained in different ways. You can rub the edges against each other, imitating the motion of hand washing. You will get a light, neat fringe. Also, by pulling the threads with tweezers, you can get a longer, stylish fringe. This creates a more natural, messy look with a jagged edge. Washing in the machine also gives a good result in creating a fringed edge.

Shorts edge trim options

After the panels are cut, there are several options for finishing the edge:

Hem it with the fold inside;
Trim with lace;
Make torn edges.

In the latter case, you get stylish shorts made from jeans; you can combine them with both sneakers and heels. Lace makes the look more elegant; such shorts are often used as dressy shorts.

DIY dress - step-by-step instructions on how to sew a dress. Design of modern models and sewing technology (95 photos)
DIY swimsuit - how and from what to sew a stylish and modern women’s or children’s swimsuit (105 photos)
How to sew a sundress with your own hands - the best patterns and a master class on sewing a stylish and modern sundress (95 photos)

1.How to cut the bottom of jeans at home?

If you've hemmed jeans at least once, you've probably noticed that the finished seam looks too flat. To avoid this, there are various techniques, one of which we will consider right now.

Let's prepare the following:

jeans;
chalk;
scissors;
sewing machine;
spray bottle with water;
ruler;
hammer;
pins;
needle;
threads;
polyethylene;
acrylic paints for textiles;
flat hard brush.

First, you should always try on your jeans to determine what length they should be. Make a mark with chalk on one of the legs.

Fold the jeans as shown in the photo and align them

It is very important to align the edges of the belt and secure it with pins

Then we straighten the trouser legs and align them along the seams.

Slightly above the mark, secure the trouser legs with pins. Draw a line according to the level of the mark using chalk and a ruler

It is very important that the strip is perpendicular to the seam

Determine the distance that will be needed for the allowance. We put a mark on it, make a line and cut off the edge of the jeans along it. Remove the pins on the bottom edge.

For convenience, we cut off too tight places on the seams and cut off the allowances at an angle

Please note that the cut out places will need to be hidden under the lapel, so their length should be enough for this

In this case, a worn effect will be created, so there is no need to iron the edges. We sweep them, having previously tucked them inside.

We fold the edges again and stitch again, as in the photo.

Some parts are still too dense. To make them a little flatter, hit them with a hammer. Thanks to this, it will be much easier to make a beautiful seam on a sewing machine.

We sew the edge at a short distance.

Place polyethylene on the work surface and jeans on top. We treat the lower part with water from a spray bottle. Keep in mind that the fabric at this stage should be slightly damp, not damp.

In this case, threads in the color of the jeans were used for hemming. Therefore, it is also better to choose the paint that is most suitable in shade.

Using a thick brush, carefully apply paint to the seam area from the outside and inside. Then leave it until completely dry. You can speed up this process using a hairdryer.

The next stage is creating a worn effect. To begin, take a thick thread, a needle and lay stitches along the line

Please note that the stitch length is about 0.5 cm. However, they should not be the same or very even

Repeat the same along the bottom edge.

Place the jeans again on the work surface and apply water to moisten them a little. Using a brush, apply white paint, but not too thickly.

We repeat the same on the wrong side.

Leave the jeans until completely dry and remove the thread. As a result, the jeans look very nice and have a slight distressed effect along the bottom edge.

How to Crop Jeans in 2021 for a Fashionable Piece

The appropriate length of the product must be marked on each wobble using a chalk and ruler. Then you should align the new hem line with the decorative stitching. As a result of this manipulation, a fold should appear on the wrong side. It is important to check that the distance from the marked hem line to the factory hem is the same. If everything is accurate, you can start pinning the hem.

Using a sewing machine, you need to stitch as close to the factory hem as possible. It is important to accurately align the side and inside seams of the product. Then we pick up the scissors. How can you cut jeans with a nice line? To do this, you need to take your time, leaving a small allowance - about 1.5 cm. This will subsequently need to be stitched with a zigzag on a machine or overlocker. After this, the hem can be lowered down and the seam allowance can be ironed up. Additionally, it must be secured with a finishing stitch into the seam. At a distance of 2 mm, you can make a contrasting line or to match the jeans using a sewing machine. This shortening method is great for inexpensive classic jeans.

How can you cut jeans into breeches or shorts?

How can you cut old jeans to make cute shorts or breeches? This question is often asked by fashionistas who have several pairs of denim pants that are out of fashion lying idle in their closets. They can easily be given a second life. To do this, you need to cut the bottom of old jeans, taking into account the desired length of the finished product. In this matter, it is necessary to focus on the characteristics of the figure, as well as personal preferences.

In addition to shorts and breeches, you can make Bermuda shorts and capris from jeans. Bermuda shorts are knee length. To make them you will need loose-fitting pants. For capri pants that will reach mid-calf length, it is advisable to choose skinny jeans.

The length of classic shorts is 10 cm above the knee. Additionally, they can be decorated with scuffs or holes. Girls with long legs and a good figure can make themselves short shorts from skinny jeans. These models are worn to the beach or for walks around the city.

Now you know how you can cut up old denim pants to make different fashionable items out of them.

Let's look at how you can cut the bottom of your jeans to make shorts. Let's start with the simplest method. First you need to determine the optimal length and mark it as a line with a pencil. Then you need to make small cuts on the outer sides with scissors and tear off the material to the middle of each pant leg. Then you need to make more cuts, but this time obliquely and downwards (approximately 5 cm). The remaining fabric also needs to be torn off.

Use an awl or nail scissors to trim the edges of torn legs. With their help, it is convenient to pull out white threads (not blue or light blue) to make fringe. Finish the work by washing it in the washing machine so that the threads fluff up.

How can you cut the bottom of jeans to create cuffs? To do this, you do not need to pull out the threads and make a fringe. The cut edge should be folded and smoothed with an iron. The second hem should be stitched on the sides using a sewing machine. You can decorate the finished new thing with sparkles, rhinestones or small beads. Jeans shorts, the bottom of which is decorated with lace inserts, look very feminine. Lace decor can be placed not only along the bottom edge, but also internal or external inserts, stripes on pockets, etc. can be made from this material.

How can you cut jeans into breeches? The process of working on this new thing is not much different from making shorts. You must first try on the jeans and mark on them the desired length of the future product. For a one-piece cuff, you will need to set aside an additional 4 cm (more or less is possible). The cut must be made along the very bottom line. We do not throw away the remaining pieces of material. They will be used to make cuffs by stitching them onto the central inner part of the side seams. The step sections need to be hemmed to the length of the cuffs and stitched. Then they are folded over to the front side, and the side sections are secured with stitches.

Now you know how to cut jeans for breeches. To get the trendy boyfriend styles, you'll need wide-leg pants. To do this, you can specifically buy jeans in large sizes or borrow these from your husband, boyfriend or brother.

In the next article we will tell you how to hem or shorten pants without cutting the length.

With wavy bottom

Cutting jeans to create a wavy hem, as one of the newfangled trends, occupies a leading position.

Visually, such an edge looks like an alternation of the main fabric of the trouser leg with loose gaps that are filled with horizontal white denim threads.

Through this alternation, a stylish effect of a torn, careless bottom is created. You can make only one loose section with elongated threads in the middle of the front of the trouser leg, you can alternate. It is not recommended to make too narrow gaps between loose areas. It is optimal to leave 3-4 cm.

Execution order:

The length of the jeans is determined. The length of the front and back panels of the trouser legs may be different. To do this, follow the same steps as for obtaining jeans with an uneven raw edge. Markings are made with chalk or pencil.
Excess edges are cut off with sharp scissors.
The distances between the loose spaces are marked. The width and height of the spaces with elongated threads are determined. Marks are made with a pencil.
At the designated intervals for spaces with elongated threads, 3-4 horizontal parallel cuts are made at a distance of 1 cm. Small parallel ribbon-like strips are obtained. From them, using tweezers, the main (vertical) threads are pulled out. As a result, there should be gaps filled only with white horizontal denim threads.
Washing your jeans will give a natural, casual effect.

Required Tools

Making fringe is not a complicated process; it mostly consists of manual operations. To do everything quickly and efficiently, prepare the following devices and tools:

a measuring tape, a small ruler, 25-30 cm long;
chalk or a flat piece of soap, for drawing lines on the fabric. If the jeans are white or very light, use a soft pencil or fabric marker;
large scissors, which are suitable for cutting jeans and small ones, possibly manicure ones for cutting warp threads;
a stationery knife or seam ripper;
a thick needle or sharp tweezers, which are convenient for picking up threads;
needles with heads or hand needles, a thimble for basting fringed braid.

If you have a sewing machine at home, choose threads that match the color of the jeans or a contrasting color, depending on the design you are planning, to provide a securing stitch above the level of the braid. If you don’t have a machine, then stock up on fabric adhesive tape to prevent the threads from falling off during washing. You may also need an iron during the work.