How to sew a wrap skirt with ties: creating a pattern, how to sew it with your own hands quickly, for beginners

Step-by-step instructions with photos for beginners will help you sew a beautiful and comfortable wrap skirt with ties. The main thing is to choose the right fabric and cut out the details from it correctly.

Layout plan for pattern

To make the product beautiful and convenient, when constructing the pattern you should adhere to the plan:

Lay out tracing paper, a piece of wallpaper or old newspapers on the table.
If there is no ready-made stencil, you can sketch a sketch by tracing another skirt that is suitable in size and cut.
Take measurements and write them down on a piece of paper.
Correct the sketch or build a pattern from scratch using the measurements obtained.
Add 1-2 cm on all sides for seams and edge finishing.
Cut out a template from paper.

Pattern construction and cutting

The main condition for the idea to be a success is to take the measurements correctly. The waistline should be measured at the narrowest part. You can navigate by the bend of your elbow. The line of the hips - along the most protruding points. It is also important to measure the distance between these two lines. The desired length of the product should be measured from the waist line.

Difficulty may arise when constructing recesses. They are not needed on all models, but they help make an outfit fit your figure. Typically 2 undercuts are required at the back and 2 at the front. In this case, the length of the first can be 8-9 cm, and the second - 11-12 cm. The width of each is 2-2.5 cm. After transferring the template to the fabric, the recesses need to be cut and then swept away.

A skirt with buttons or a zipper is comfortable, but a belt allows you not only to secure the outfit on the body, but also to adjust it to a changing figure or, if desired, to wear it a little higher or lower. This option is especially suitable for beginners. After all, cutting a belt is simple: cut out an elongated rectangle of fabric, fold it in half and sew it to the main part.

If desired, you can sew a culotte or shorts with a wrap. Unusual models combine beauty, femininity and comfort.

Ironing

Before you start sewing and processing the details of the skirt, you need to make preliminary preparations - iron the belt so that it is more convenient to baste it to the skirt panel. If you had to cut out two parts of the belt, then stitch them into one long strip, folding them with the right sides inward. Press the seam. Then place the piece face down, fold the waistband in half lengthwise and carefully iron the resulting fold. Lay the piece out again with the front side facing the tabletop, unfold the longitudinal central fold. Now tuck first one longitudinal edge to the central fold, and then the second edge. Iron both folds, fold the waistband along the center fold and carefully iron the entire waistband.

4 meters per second: Roscosmos published photos of giant tornadoes on Mars

The biologist spoke about the difference in the consequences of coronavirus for men and women

Is It Really Ethical to Use Child Tracking Apps?

If the fabric you decide to use for sewing a skirt is difficult to iron or is too thin, use a damp cotton towel or diaper. For reliability and ease of work when sewing a skirt, pin up the folded edges using tailor's pins. Remember to carefully pull them out one at a time while using the sewing machine to avoid damaging it. If you have the desire and opportunity to spend a little more time on preliminary work, then you can not pin the folded edges of the belt with pins, but sweep the needle with the seam forward.

Materials for production

For a prototype with a smell, easily draping materials are most often used. You can choose natural thin fabric or dense synthetics. It depends on the purpose of the clothing, as well as the preferences of its future owner.

Suitable material:

cotton;
linen;
jeans;
silk;
knitwear;
Niagara;
chiffon;
satin;
viscose.

A leather wrap skirt looks unusual, fashionable, and stylish. It does not require a lining underneath.

The non-woven insert in the waistband will make it dense and hold its shape well. You can also use various accessories and decor. When working, you cannot do without a standard set, including materials for creating patterns and sewing accessories.

Before starting work, it is recommended to wash, dry and iron the fabric. This will avoid problems with shrinkage of the finished product.

Who can wear a long wrap skirt?

The main advantage of the cut is that long models with a decorative overlay perfectly narrow the hips, making the figure slimmer. This is an excellent choice for plus size girls who are shy about their shape. The scent, cut diagonally and decorated with thick drapery, visually elongates the silhouette and brings the correct proportions to it.

A long skirt, widened at the bottom, seems to be a good option for girls with wide shoulders and narrow hips. A trapezoidal cut can visually widen the bottom and balance it with the top.

A low-cut model without a belt serves as an excellent disguise for a missing waist and a slightly protruding tummy. This is a worthy option for women in early pregnancy.

Another obvious advantage of the cut is the length, which can hide bad legs. Due to the fact that when walking the smell is revealed only slightly, only the ankles are visible to others.

Step by step instructions

This outfit can be sewn with or without darts. The length should be chosen to suit your specific figure. The smell can be made invisible or emphasized from the front or side.

Wrap skirt without grooves or seams

The simplest option, which even a beginner can handle sewing, is a beach model. You don’t need to create complex patterns, make grooves, build in a zipper, etc. All you have to do is sew on the belt and trim the edges. To sew a beach skirt, light flowing fabric is used, for example, silk, chiffon, cotton.

Sequencing:

1 Measure your waist circumference at the narrowest point.

2 Take a piece of material, the length of which is equal to double the length of the future item of clothing plus another 50 cm.

3 Unfold the fabric, then fold the edges along the edge.

4 Cut edge, mark 1.5cm for seam allowance.

5 Divide the measured waist volume by 3.14, the resulting number will be equal to the waist line. Set this parameter aside on both sides of the corner and draw a radius.

6 From the waist line, measure the required length + 3 cm for the hem, draw another semicircle below - the bottom of the skirt.

7 You need to add the smell to the resulting pattern. To do this, unfold the fabric and continue the drawing, building exactly half of the resulting figure.

8 Cut the workpiece, process the cut. The bottom and sides can simply be folded twice and stitched.

9 Cut out the belt: cut out a rectangle 8-10 cm wide and as long as needed for the ties and waist circumference.

10 Fold the workpiece in half. Place a strip of adhesive fabric inside and iron.

11 Sew one side of the waistband to the skirt using a basting stitch and stitch. Turn the free edges of the waistband inside out and stitch.

12 Then turn it right side out, iron it, and sew the other side with a blind stitch.

Long wrap skirt

For the simplest models you don’t even need a pattern. Using these instructions, you can sew a pilgrim skirt for visiting churches and holy places. A well-draped fabric is suitable for work. You will need a piece with a length of 1.5 or 1.75 hip circumferences, a width equal to the desired length of the skirt + 20 cm. You can sew from one piece or divide it into 3 parts: 1 back and 2 front.

Sequencing:

1 Cut out the fabric pieces.

2 Make darts or gather several folds when sewing on the belt.

3 Finish the edges and hem the bottom.

4 Sew on a belt with long ropes to tie a bow.

5 Make a slit in the front panel for the ties, and sew the hole with an overlock stitch or a buttonhole stitch.

6 If desired, decorate the finished product with fittings, pockets or ruffles.

A-line wrap skirt

A stunning model for a slim figure. It is advisable to choose a dense material or insert a lining so that the product has an even, straight shape. You can take a ready-made pattern and adjust it to the required dimensions.

Sequencing:

1 Draw a pattern on paper, add 1.5-2 cm to the seams on all sides, cut along the marked lines.

2 Using the resulting stencil, cut out parts from the material.

3 Do not cut the darts yet, just baste them with wide stitches, then attach the workpiece to the body. If the workpiece fits the figure, you can start processing the seams. If you want to shift or deepen it a little, you need to do this at this stage.

4 Next, work on the seams and finishing the edges.

5 In addition to the belt, you can sew on a hidden button so that the A-line skirt fits well on your figure.

Wrap skirt with yoke

This beautiful model with a wraparound front is suitable even for the office. The straight cut of a pencil skirt looks appropriate both during business negotiations and during shopping.

To create a pattern, you can use the basis for a straight cut model. For smell you will need to add 10-15 cm to the front parts. The additional blade in the drawing should reach approximately to the recess. This model should be narrowed at the bottom. It is enough to move the side seams just a couple of centimeters, no more, otherwise the smell will be revealed while walking.

How to sew a wrap skirt with a yoke with your own hands:

1 Construct a pattern on paper according to the required parameters.

2 Cut out blanks from the selected material.

3 Finish the edges, sew the undercuts, make the main seams.

4 The bottom edge of the yoke can be slightly rounded.

5 Sew the belt on top using the standard method. But in this model it will look good as ties in the front or on the side.

The skirt can be sewn without side seams. To do this, it is enough to build deeper grooves on the sides than in the front.

Boho wrap skirt

Boho-style skirts, which have become popular recently, are distinguished by their volume, natural materials, comfort, flowing, loose tailoring and ankle-length or floor-length. Such models are characterized by combinations of different materials and textures, the presence of decorative inserts, ethnic ornaments, and embroidery.

Boho is a universal outfit that will suit women of any age and body shape. One of the simplest ways to sew it is to choose a wrap pattern.

Step-by-step instruction:

The width and length of the fabric cut for the skirt can be chosen arbitrarily. The more material is used, the more magnificent the product will be.
You need to make 6 recesses: 2 rear, 2 front and 2 side.
Double stitch the edges. You can sew on ruffles, lace, frills or other decorative elements. Additionally, you can decorate the front of the skirt with them.
Sew a narrow belt into which insert a wide elastic band at the waist.
Sew long ties to the belt.

Beginner seamstresses can also sew easy-to-sew wrap patterns.

Some models don’t even need patterns; all you need to do is take the measurements correctly and calculate the required amount of material.

Fabric processing

The belt is ready, all that remains is to process the edges of the main panel of the skirt. Place it on the table with the right side of the fabric facing down. Move one side cut closer. Fold the edge in 1 centimeter and pin the hem, leaving the heads of the pins on the right side of the fabric. Go through the whole edge like this.

Then fold the fabric again by 1-1.5 centimeters and pin the hem again, removing the previous pins. You now have a double hem of fabric, hiding one raw edge. Fold the second side cut in the same way. Sew both sides of the skirt using a sewing machine in one line.