Do-it-yourself king costume: step-by-step execution of a king costume for a boy and an adult

DIY king costume

To create a king’s New Year’s costume for your boy with your own hands, you need to know what main and additional parts it consists of.
This is what we will consider in our article. The king's carnival costume usually consists of:

mantles;
crowns;
short pants;
white shirt;
short jacket;
shoes or boots.

But the most necessary parts of this costume are the robe and the crown, and underneath you can wear a white shirt and black trousers.

Master class: how to sew a robe for a king’s costume for a child

You will need:

fabric measuring 1m by 2m;
sewing tools: threads, pins, needles, scissors.

Progress:

To make a regular semicircle, attach a marker to a thread with a length equal to the width of the material exactly in the middle of the fabric.
Stepping back 15 cm from the middle point on the top edge, we make a small semicircle.
We cut the material along the drawn lines. Additionally, we cut strips 5 cm wide across the entire width of the fabric.
We try on a strip of length for the child so that it is long enough to tie it around his neck. If the strip is very long, cut off the excess.
We make a piping on one side of the strip; to do this, we bend it on one side by 0.5 cm and stitch it.
Using pins, we secure the strip to the collar of the raincoat and attach it so that the edging made sticks out a little.

That's it, the cape is ready.

Once the robe is sewn, you can embroider any royal sign on the back.

Of course, for a king’s costume, it is better to make such a cloak from red fabric and sew white fur with black dots along the edge so that it looks like this:

For the convenience of sewing a robe for a king’s costume, you can use the following pattern:

Where:

R1 is the length of the mantle, it depends only on you;
R2 – neck circumference x 3.14.

Master class: how to make a crown for a king's costume

You will need:

crocheted lace, the length we need;
gelatin;
bijouterie;
silver or gold acrylic paint;
a piece of cardboard or a small tube of hard paper;
microwave;
tools: brushes, plastic gloves, scissors, pencil, bowls, tape.

Progress:

We cut the lace to the length we need, sew the ends together to make a ring and give it rigidity. To do this, pour 1-1.5 teaspoons of gelatin with warm water and leave to swell for 40-50 minutes. Then we heat this mass in a water bath and pour this solution into the lace for 20-30 minutes.
We make a blank to stretch the lace: we cut a strip of cardboard 10 cm wide and the same length as the lace, and use tape to secure the ends to form a cylinder.
Having put the lace on a paper cylinder, put it in the microwave for 30-40 seconds at maximum temperature, then take out the workpiece and apply another layer of gelatin. We repeat this action 7-8 times until the lace becomes stiff.
Remove the lace from the cylinder and dry it again in the microwave (30 seconds).
Apply the selected paint to the dried product with brushes and set it to dry, but not in the microwave, but simply on the windowsill.
After the paint has dried well, decorate with light jewelry: a brooch, rhinestones, beads. The crown is ready!

You can complement the main elements of the costume by sewing wide lace, which is worn over the robe.

And decorating the child’s ordinary shoes with a bow to match the color of the main outfit.

When choosing the main fabric for making a suit for the king, you can take not only red fabric, but also gold, blue, and white. But for the crown and for additional elements (belts, ropes, lace, braid) you need to take gold color.

You can make other costumes with your own hands, for example, a knight or a pirate.

Source: https://womanadvice.ru/kostyum-korolya-svoimi-rukami

Prince costume for a boy for the New Year: what does it consist of?

The Prince costume must be equipped with:

vest;
decorated shirt;
pants;
mantle;
a crown or beret with feathers;
with a sword.

For a beautiful prince costume, you can use available materials, and you can create it in three versions. There is some similarity with fancy dress costumes: “Puss in Boots”, “Musketeer” and “King” , so some details can be used, if necessary, when creating these images.

The material for the outfit should be bright - it is best to use velvet or satin .
The Prince will look great in a blue, gold or green robe and short pants.
Red is the prerogative of the king, so it is better not to dress the prince in it.

How to sew a king's robe?

To do this, we need fabric one meter by two (1 m by 2 m). All the necessary tools. Threads, scissors, needles, pins. Draw a semicircle on the fabric, first stepping back from the top edge 15 cm in the middle. Cut along the line. The lines should be like this.
I would make the mantle from velor, the edging could be made from fur. The collar can be sewn using the same pattern as the mantle, only shorter. Or you can cut the collar quot;jabotquot; and, to stand, insert the corsage. Decorate at your discretion with all sorts of stripes and stickers. And break it down something like this:

One of the most important attributes of a king's costume is the robe.
The mantle is a wide, long cape, decorated with precious ermine fur.
Read also: DIY chiffon dress. Selection of style, pattern and description of work
How to make a king's robe?
We will need:
thick red fabric;

white faux fur;

button or brooch;
black acrylic paint;
graph paper.

First you need to measure the circumference of your neck and the length of your robe. We make a pattern, draw a semicircle on graph paper, the radius of which is equal to the length of the product. From the same center we draw a second semicircle, the radius of which is equal to the circumference of the neck divided by twice the number.
We cut out the mantle from red fabric, leaving 1.5 cm seam allowances for all cuts. We cut a cape from white faux fur (with seam allowances).
We sew together all the details, sew on a fastener at the neck level in the form of an air loop with a large button. Or use a large brooch.

Second version of the mantle

You can take an even simpler route and sew a rectangular cape. To do this, cut a rectangle out of fabric. Choose the length based on your child’s height, and the width based on his size. After cutting out a large rectangle, wrap it around your child to see exactly whether the size fits or not. If it is suitable, sew a loop to one of the corners. And to the other - a large metal button. Decorate the edges of the cape with faux fur. Along its entire length it can be decorated with an ornament of sequins, beads or other decorative elements. Another decoration idea is braid. Sew bright painted braid along the center of the mantle or in any other places.

How to make a king costume for a boy with your own hands

Preparing for the New Year is not only about endless shopping trips in search of special gastronomic delicacies for the holiday table, original items for gifts to family and friends, stunning clothes for the most magical evening of the year. Those who have children of different ages are concerned about another serious problem: carnival costumes for kindergarten and school parties.

Advantages of the image

So that you have at least one less thing to worry about, in this article we will think together and decide how you can sew or make a king’s costume for a boy from available materials.

What's so good about this outfit? It is equally suitable for a 4-5 year old child and a 12 to 14 year old teenager.

Important

That is, all mothers with sons, from the middle group of kindergarten to the 7th grade of high school, can gain a lot of useful information and take advantage of the ideas offered.

After all, a king’s costume for a boy is an ideal option for a truly bright, elegant, spectacular attire. In the romantic image of a young monarch, your child will feel comfortable, comfortable, and pleasant. And you can successfully use many of its details for your next carnival show.

Principle of analogy

Agree that the king’s costume for a boy is really similar to the outfits of a musketeer, a pirate, Puss in Boots, and the Marquis of Carabas. They require white shirts or blouses, lace shirtfronts and cuffs, capes, and over the knee boots.

Thus, having made one version of the New Year’s “outfit”, you can continue to use the existing developments.

So it turns out that a king’s costume for a boy is the ideal solution to the problem with a carnival costume in general for several years to come.

We think, discuss, propose

Of course, the easiest option is to buy all the necessary accessories in a regular store or order online. But even a thing chosen according to size often still has to be adjusted to fit a specific figure, and it does not always fit well. So let's try to make the king's costume with our own hands.

Its components: regular black trousers or sewn pantaloons, maybe knee-length or mid-calf pants, secured at the bottom with elastic bands and trimmed with lace. A white shirt, as an option - a mother’s or sister’s blouse with long sleeves.

It should be quite spacious, slouchy, therefore, you don’t need to sew it up much, since it will be tucked into your trousers.

If you are making a king's costume, sewn with your own hands, with short legs, you should take care of white knee socks (for a small child, tights are also suitable) and shoes with buckles or high boots. Plus, of course, a mantle (cloak), a crown or hat with a plume, a sword on a belt or in a sling.

Let's start with shoes

Homemade carnival costumes tend to be particularly challenging when it comes to shoes. With girls, however, it is easier in this matter. But we also solve it for the guys. Royal shoes can be black or dark brown.

If they are already old, well-worn, you can add shine by covering them with gold or silver foil - of course, this is for a king from a kindergarten. Be sure to make large buckles. You can use flexible wire to make blanks, which you then cover with golden fabric and attach to the shoes.

Advice

If royal carnival costumes require boots, we suggest doing so. Bring your child’s winter shoes (we are talking about boots and ankle boots, since other types are not suitable) to perfect cleanliness and shine; cover up any scuffs and other defects with cream or wax. Cut out the cuffs from cardboard, like over the knee boots.

Paint it with silver or bronze paint and attach it to your son’s boots. You can do this using double-sided tape.

Working with a cape

There is no king's New Year's costume for a boy without a cape. You can also sew it in different ways. This is either a long (almost to the toes) cape-cloak, trimmed along the collar, floors and bottom with ermine, or short, to the middle of the thighs. The color of the mantle can be blue, blue, red. As a rule, it should match the color of the pantaloons.

You can even use the same material - velvet, thick curtain silk or satin. The main condition is that the cape should look rich and elegant. The dimensions of the cloth are approximately 1-1.5 meters by 2. Having made a pattern and cut the material into blanks, sew the mantle with your hands or a machine and sew on the trim.

Instead of fur, a white edging is suitable, which can be corrected with a black felt-tip pen by applying “spots”. This is exactly the cape worn by most fairy-tale monarchs from films.

If mom knows how to sew and has some free time, the mantle can still be decorated with Christmas tree rain so that it gives more shine to His Majesty, because this is exactly the king’s carnival costume!

A few words about the crown

This is where no one should have any difficulties. Making a royal crown - what could be easier! Take a sheet of cardboard that is wide enough to fit around your head. You choose the height of the headdress yourself. Using a simple pencil, draw out the teeth, trying to make them the same.

And cut out the blank. Connect the ends into a circle with paper clips or glue. Paint the crown with bronze paint or cover it with foil. To make the king’s children’s costume have a more “regal” look, stick beads, rhinestones or pieces of rain onto the headdress.

note

If a wide-brimmed hat or a royal beret suits you more, take care to decorate them with a large brooch and feathers - one is enough for a beret; a larger plume is needed for a hat. You can buy feathers at a sewing accessories store. Or use lush Christmas tree rain instead.

Beret for a prince with feathers

When sewing a prince costume for a boy with your own hands, the headdress can be made in the form of a luxurious beret with feathers. Some boys will like this idea more than a crown. It's quite simple to do.

Materials:

• fabric to match the suit and gown;

• feathers for decoration;

• brooch.

Progress

To sew a beret, you can use the given pattern.

1. Cut out the paper pattern pieces and transfer to the fabric.

2. Pin together the parts of the crown and bottom and sew on a machine.

3. Gather the workpiece, distributing it evenly along the edging of the beret.

4. Stitch on a machine.

Turn the finished beret right side out and decorate with feathers, lace or rhinestones. They are carefully glued to the side of the beret, covering this place with a large brooch.

The beret can be used not only for the prince's costume. He is irreplaceable in the image of Puss in Boots, Marquis, Musketeer and other fairy-tale heroes.

You need to complement the prince's image with white knee socks, shoes and a sword.

DIY New Year's costume for a boy

The New Year is approaching and that means it's time to prepare a fancy dress! This master class is dedicated to sewing a New Year's suit for a boy in the Greek style. You can sew such an unusual outfit for your child yourself, even without any tailor experience. All you have to do is follow the instructions and create!

This set includes: a Greek outfit-shirt, a laurel wreath and a belt.

To sew a New Year's suit (97 cm long) you will need:

1 meter of white crepe satin
3 meters of decorative narrow ribbon
60-70 cm thick (jacquard) tape for the belt
1 meter of gold crepe satin or brocade
Threads, Velcro fastener.

Sequence of work:

1. In the picture you can see an approximate diagram of the future shirt.

Draw a pattern, taking into account the desired length, width and sleeve length.

Fold the fabric in half twice.

2. Pin the material with needles and cut out the parts. You will get two parts at once - the front and the back.

3.Sew the shoulder seams. Finish the neckline (in my case the neckline is a boat neckline and finished with a hemming foot).

4.Sew the side seams.

5. Finish the bottom edge of the shirt and sleeves using any available method: with a hemming foot or with an overlocker. Sew on decorative ribbon.

6.Now you will need gold cloth. Cut the material in half.

Stitch along the short side. You will get a long strip.

7. Finish the edge around the entire perimeter using the hemming foot.

8.Now sew the resulting rectangle to the middle seam of the sleeve on the shirt. Create neat folds.

9. This is what it looks like when finished.

10.We will make a belt from thick tape. Cut the ribbon to the required length and burn the edges so they don’t fray. Sew on the Velcro.

11. Finished costume.

Let's make a laurel wreath from paper:

12.Cut out double petals from golden crepe paper. Fold the paper in half to create double pieces.

13.Glue the petals together. Make half the petals gold and half white.

14.Alternating white and gold leaves, glue them together in a line.

15.Glue a satin ribbon on the wrong side, leaving 15-20 cm at the ends for tying.

16.This is what we got.

A children's New Year's suit for a boy is sewn within a day. Now your child is ready to show off at the party. Happy New Year and success in your creativity!

Especially for the site Handicraft Lessons Fount.

Source: https://xn—-htbdjdhckueqe7ag0q.xn--p1ai/novogodnij-kostyum-dlya-malchika-svoimi-rukami/

DIY carnival costumes for teenagers and adults

We continue our review of nostalgic carnival costumes from the 1958 Housekeeping Encyclopedia.

This article is devoted to how to make carnival costumes for teenagers and adults with your own hands. As you will see later, there are no restrictions on creativity and you can literally build an original costume in an evening from materials available in every home. We wrote how to do this here.

Karabas Barabas

A hat made of cardboard or thick paper. A beard made of red, yellow or orange paper, cut into fringes, is attached to it with an elastic band (under the neck). Bunches of the same fringe can be attached to boots. Attach a feather to the hat.

Suit of Snow Maiden

Sew small cotton wool balls (snowflakes) onto the dress. Decorate the round white collar with white ribbons, silver Christmas tree thread and beads of different colors (from Christmas tree beads), sew the beads along the ribbons.

How to sew a finished white ribbon along the front of the dress. Trim white cuffs with Christmas tree trim. Attach a fringe to a kokoshnik made of white paper, along the bottom and top, and embroider it with silver Christmas tree thread, stars and Christmas tree beads of different colors. Sew linings cut out of white paper onto the stockings.

Santa Claus costume

A hat made of thick white paper is trimmed along the top and bottom edges with curled fringe. The top of the hat is made of colored bright paper. Attach a beard made from white paper washcloth or made according to Fig. to a hat with an elastic band, worn under the chin. 1.

Sew small cotton balls (snowflakes) onto a ski suit (preferably red or crimson). Make cuffs from paper with fringe and sew them to the sleeves of the jacket. Sew a collar of white paper with fringe to the collar of the jacket. In addition to the suit, you can make overlays for boots (under morocco boots).

Chess king

The suit can be yellow and black or black and yellow. Sweater, leggings and trousers of the same color (leggings can be replaced with long stockings). Sew black shiny ribbons onto yellow bloomers (if the bloomers are black, then the ribbons should be yellow).

Additionally, in the color of the suit, make shoulder pads, a peplum and a collar from thick paper or from double fabric, which should be stitched several times so that it sticks out. The peplum is poured onto the belt and worn with it. The cloak depicts a chessboard.

The headdress consists of 2 parts: a jagged crown and a pointed top. Attach a beard of m3 black paper to a hat with an elastic band (worn under the chin) (you can take paper from photographic envelopes). If the whole suit is black, then make the beard yellow. Cut the beard paper into narrow strips and curl it over a pencil.

Puss in Boots

Make stripes with gray paint on the forehead and sides of the mask (the cat’s face) and attach whiskers; in front, the mustache should lag behind the muzzle. Paint the nose drawn on the mask with pink paint or make it out of pink paper and glue it like an applique. Make the tail from white thick paper, glued in 2 layers.

A collar made of white corrugated paper, folded in half; thread a double thread along the top of the collar and pull it off.

Cut out the leggings that go with the boots from cardboard or thick paper, and cover them with paper in the color of the boots or red or yellow. Green colour; Trim the upper edge of the gaiter with paper lace.

Important

Attach a cardboard buckle with a bow to the front of the boot. Spurs are made from cardboard covered with foil.

Also attach gaiters made of thick white paper to the white gloves. The basis of the costume is a bright-colored ski jacket (red, blue or green), and decorate the trousers with ribbons attached along them (you can use ski pants, lifting them above the knees). The cloak is short - made from a piece of bright fabric.

Carnival costume of the devil

On black, dark gray or brown sweaters and leggings (leggings can be replaced with thick black tights) you need to sew tufts of “wool” from thick threads of gray, marsh green or reddish color.

Cover the wire tail with fabric in the color of the suit or stocking; attach a bun in the form of a large brush at the end (the tail is strengthened around the waist). The hooves and headdress are made in the same way as in a goat costume, but you can add a downward nose to the headdress. Cover the horns with silver foil. Eyes can be made from shiny foil.

Firebird

The main part of this costume is a headdress (made of thick yellow, pink or red paper) depicting a firebird.