Headband for girls (do-it-yourself)

How to sew a headband with a bow

The fourth method It is better to make it from knitwear. A rectangle is cut out in length slightly less than the girth of the head, if the fabric stretches well, then 1/3 or 1/4 of the head girth can be removed, if not, then a couple of centimeters and without allowances, in general it depends on the stretchability of the knitwear . To check, you should apply the fabric to your head and pull it around the circumference and feel how comfortable it is, choose the width at your discretion. Decided on the sizes and cut them. You also need to cut a rectangle for the bow; the width can be the same as the headband, and the length is about 1/3 of the length of the headband in two layers.

And a small rectangle or square to hold the bow and headband together.

I also recommend watching a selection of master classes “How to make bows from different materials”

How to make a large, lush, beautiful bow from ribbon, fabric and lace? How to properly make a bow from a wide, narrow and thin ribbon with your own hands? How to make a beautiful simple bow from nylon, paper ribbon and satin, grosgrain hair ribbon?

And the fifth idea, a headband with a wide bow that can be tied.

This is interesting: Pattern Plush hat with ears and tassels (size 86/92, 98/104, 110/116)

Pink headband

The baby's head volume is about 45-46cm.

We will need:

melange yarn, 100% cotton (50g per 152m), light pink color – 50g;
the same, dark pink for decoration;
knitting needles No. 3;
hook number 3.

Patterns used:

facial surface: in faces. R. – facial, in purl. R. - purl stitches;
openwork: 1p.: 1kr., 1l., *2p. in 1l., 1n.* - from * to * repeat until the end of the r., 1kr.;
2p.: purl.

Knitting density: faces. Ch. 23p. for 33r. equal to 10 cm by 10 cm.

Description of the headband for girls

We cast on with knitting needles 90 sts. light pink thread and knit 1 p. purl. Let's move on to faces. Ch. and perform 6p with this pattern. Next we knit an openwork pattern. We complete 6 r. persons Ch. We close the loops. Sew the short sides of the bandage. Using a dark pink thread, we crochet along the long sides of the product 1 row of single crochets and a picot next to it. We twist a lace from a dark pink thread and stretch it into an openwork row.

Elegant headband with lace

Beautiful headbands for girls are obtained if you use a lace ribbon to make them. For this you will need:

a wide lace ribbon slightly less than the circumference of the child’s head;
a small piece of wide elastic;
narrow lace ribbon for decoration;
several beads.

Measure out a wide ribbon with the intention of inserting an elastic band into the back of the piece to keep the headband in place. Carefully trim the edges to avoid fraying of the lace. Sew on the elastic.

Make small flowers from a narrow lace ribbon and sew them to the headband. They can be made by sewing the ribbon into a ring, and then gathering it along one edge onto a thread. You can also make a lush bow from a narrow ribbon. To do this, it should be wound on the base, sewn in the center, and then straightened out, giving the desired shape. In the center of the flower or bow you need to place decorative elements: beads or rhinestones. You can also use ready-made lace bows or flowers, which are sold in stores.

This headband for a girl will go well with an elegant princess-style dress, which is so popular among mothers and daughters.

Headband for girls

A knitted headband not only holds your hair in place, but also provides warmth in cold weather and also protects your ears from gusts of wind.

Such products became popular along with the pin-up style.

To sew a headband for a girl, you will need:

skein;
knitting needles or crochet hook;
big needle.

Making a fashion accessory for a girl is very simple. To do this, you can choose any pattern you like: dense or not very dense, openwork or not, and also use different materials and colors.

Detailed job description:

Measure your head.
Subtract a couple of centimeters from the calculated figure. This is necessary so that the finished item fits well and does not fly off the head.
Make a beautiful strip 5 or 10 cm wide: 5 is enough for a baby, but for an adult girl it is better to tie it wider - 10 or even 20 cm. Sew the edges from the inside out. That's it, the headband is ready.

How to make baby headbands with your own hands

How to make a headband with your own hands? To make a beautiful headband for your baby, you need to use high-quality fabric and unusual decorations. This master class uses lace braid, which will become a wonderful basis for a future accessory. Materials:

lace braid;
tape measure;
scissors;
threads in the color of the braid;
needle;
cotton fabric for decoration;
large beads or rhinestones for decoration.

Let's get started with step-by-step instructions for making a beautiful hair ribbon. To make a bandage with your own hands, you need:

Measure the circumference of the child's head.
The length of the bandage should match the circumference of the head in centimeters. If the strip of braid is longer, the bandage will fall off. If the tape is shorter, the accessory will put pressure . Cut the lace to fit the circumference of the baby's head.
Using thread and needle, connect the two ends of the ribbon . You need to sew the tape carefully. This can be done with hot glue, but then the decoration will not be as durable.
For three colors, cut three strips of cotton fabric 30 cm long and 8 cm wide.
Finish the bottom of the strip . Stitch carefully. Assemble the workpiece into an accordion on a thread, slowly pulling it out.
Close the strip of fabric into a circle and tie a knot. To make the circle look neat, tie a thread on the back of the product.
Glue beads or rhinestones representing stamens onto the finished flower.
Sew flowers onto the lace braid with threads or glue with hot glue. The decoration is ready .

Materials for making a bandage

Who said blue is only for boys? Nothing prevents you from making a blue headband for the baby, because pink ones look somehow banal. But if you wish, you can choose any colors that match the girl’s hair and outfits.

To work, you will need narrow tapes 5 and 12 mm wide , which must be cut immediately:

40 strips of dark blue satin ribbon – 0.5*7.5 cm;
24 pieces of blue ribbon – 1.2*7 cm;
8 pieces of silver brocade – 3*4 cm.

Also, to make a baby headband with your own hands you will need:

2 circles of blue felt 1 mm thick and 4 cm in diameter;
white glitter foamiran 2 mm thick;
center with a diameter of 2 cm;
decorative blue flower with a diameter of 2 cm;
stretch tape in white or blue.

Check out another version of a headband for a girl with three roses and a master class on making a children's headband from Thomas.

Soft bandage for little ones

This headband can be used to decorate the head of a newborn baby. Besides the fact that it looks very cute, it also keeps you warm.

In order to make such a bandage, you will need a piece of soft and thin fabric. The width of the cut should be approximately 2 times the width of the future product. In addition, you will need another small piece of the same fabric for decoration.

Measure out a rectangular piece of fabric. Its length should be equal to the circumference of the baby’s head, and it is also necessary to leave a seam allowance.

Sew the ends of the bandage. Then gather the fabric along the seam and secure the seam.

Now the seam should be finished. To do this, you need to cut out a rectangular piece from the same fabric that will seem to tighten the bandage. It must be wrapped around the seam and connected into a ring. You can decorate the headband with a bow made of the same fabric.

This is interesting: Pattern Headband with bow (size 1 month - 4 years)

MK Beautiful headband: knitting a model with removable decor

kisLinka

Guru

I want a bow like this for myself too! I absolutely love these “girly” accessories from the era of the 60s - in my opinion, they are very playful and flirty. Do you think it will go well with long hair with bangs?

Juni

Guru

kisLinka wrote:
I want a bow like this for myself too! I absolutely love these “girly” accessories from the era of the 60s - in my opinion, they are very playful and flirty. Do you think it will go well with long hair with bangs?
Click to expand...

With the right outfit - great! For example like this

bussinka

Guru

kisLinka wrote:
I want a bow like this for myself too! I absolutely love these “girly” accessories from the era of the 60s - in my opinion, they are very playful and flirty. Do you think it will go well with long hair with bangs?
Click to expand...

This is a pin-up style)) Very cool flirty retro ❤ Not only a headband, but also the whole image needs to be thought through. If you create a complete ensemble - headband + clothes + accessories, then of course it will suit you

For adults, you can sew it without elastic at all - it also holds up perfectly! Used for a themed bachelorette party.

Tosha

Newbie

How lovely! I’ll definitely make these for my daughters this summer!

Benefits of a headband for girls

This original accessory has many advantages:

Tying knots takes no more than five seconds, and if there is a special elastic band inside the bandage, then even less.
The headband will decorate both everyday and festive outfits.
This hair accessory looks great with any hairstyle - loose hair, ponytails or braids.
With a headband you can create extraordinary Greek hairstyles and diversify your child’s style.
The accessory allows you to pull short, unruly hair back, and it will not interfere with the child during everyday activities.
A wide accessory does not require constant combing of unruly hair.

The headband can be combined with any clothing: skirt, jeans, dress. This accessory is suitable for a newborn baby or a preschool girl. The accessory will immediately add zest to the outfit, making it beautiful and complete. A child's look changes depending on the accessories added to the outfit, and a headband is great for changing up the look.

Ideas for baby headbands

In the video - an organza headband for a baby:

DIY: Baby Headband | la.mansh

Required measurements

It is very important to correctly determine the size of the product before knitting a headband. You can take your head circumference as a basis, but under no circumstances make exactly the same bandage. This accessory is elastic, it should stretch a little and fit tightly around your head. As you wear it, the knitted fabric loosens a little and stretches. Not every yarn springs well.

When taking measurements, it is worth considering the following nuances:

The head is measured with a measuring tape in the same way as the bandage will be worn. Not across, not in height, like a kokoshnik.
You need to subtract 8–10% from the resulting value so that the strip fits snugly on your head. If the yarn stretches, you can subtract 13-15%.
The width can be made arbitrary, but options for the cold season should completely cover the ears. This is at least 12 cm.

In order not to make a mistake with the size, after casting the required number of loops, you need to make a sample. It is not enough to just knit it; you must wash and dry it. This will help you find out whether the thread thickness and pattern are suitable, and also whether the yarn is fading.

Accessories are often made from leftover threads, so the number of stitches can be approximately determined from another knitted item made from the same yarn.