Crochet headband: diagram, description, master class

Rubber

To crochet a headband as quickly as possible, it is enough to use simple and accessible knitting techniques. Consider a pattern that resembles an elastic band.

This embossed pattern is great for adding warmth to your wardrobe. This pattern is used to make stylish sweaters, scarves, head caps and even mittens. The main advantageous difference between elastic and figured knitting is good elasticity and preservation of the shape, length and structure of the product.

Basic principles of this knitting technique:

• alternating columns with and without double crochets, forming a beautiful relief pattern;
• grip on the back half loop, providing elasticity;
• change of convex and concave rows in variations: 1 x 1, 2 x 2, 3 x 3, as well as 1 x 2, 1 x 3.

The easiest way to crochet a headband is to create a strip of the required width with a 1:1 elastic band. In this case, each row is performed with single crochets behind the back wall of the loop.

Depending on the required shape, the strip can be narrowed towards the ends by decreasing one loop on both sides.

The decoration on the frontal part looks very stylish if it is placed on an elastic band fastened across the main fabric.

Video lesson:

Stylish bow headband

This is a very simple headband, quite accessible to knitting even for beginners. The yarn is taken quite thick. The number of loops that are cast on to knit a headband is determined by the size of the head. It is enough to measure the number of loops you have cast on, slightly shortening it to the size of your head, since the bandage will be a little elastic and should fit tightly on your head.

Next, the intended pattern is knitted in half-columns. It is explained in rows, and there are seven rows in total. It is not difficult to repeat the pattern, but it turns out beautiful. Next, the ends of the bandage are connected to each other, and with the remaining thread the bandage is tied across, and the appearance of a bow is obtained.

Wavy bandage

It is advisable to knit this accessory from yarn of two colors. They can alternate one or more times.

1. With a crochet hook you need to pick up 72 (84) chain stitches of yarn of the same color.
2. We knit the first row with a single crochet.
3. We perform the second row as follows:
4. *1 half double crochet, 1 strong double crochet, 1 single crochet, 5 double crochets, 1 single crochet, 1 strong double crochet*. Repeat from * to *.
5. Next we knit 1 row with single crochets. We perform the next two rows in the same way, but in a different color.
6. The sixth row is performed asymmetrically to the second. The seventh row is single crochet.

To make it easier to learn how to crochet a headband with the “Wave” pattern, you need to use the diagram and description of each type of loop. Let's look at the progress of the work in more detail.

Types and models of knitted headbands

A headband has many advantages over other headwear. Hair does not lose its appearance like after wearing a hat. The headband also allows you to remove strands from your face if it is used as a hair hoop. This accessory is indispensable in the off-season, when the weather is unstable and it is easy to catch a cold.

The range of knitted headbands is quite wide:

• Young people prefer an “animal” theme, when the headband is knitted with ears or a muzzle.
• Oversized models are made by weaving several knitted fabrics into one.

Headbands have been a fashionable and sought-after accessory for many years now.

• The bandage is made with a regular English elastic band.
• Headband with a braid pattern.
• “Solokha”, when the two ends of the bandage are tied in a knot in front of the head. The ties can be real ends of the knitted fabric, or false ones.
• Summer version with openwork pattern. Usually knitted from cotton threads.
• "Turban". The appearance of such a bandage resembles an oriental headdress. A turban decorated with bright decorations, such as a brooch, looks especially effective.

Basic Crochet Elements

1. An air loop is created by pulling the thread from the previous element.
2. A single crochet stitch is knitted by pulling a loop from the previous one, which is passed a second time through two links on the hook.
3. A strong double crochet is called a half double crochet. A yarn over is made, then a loop is pulled out from the chain link, then the thread is grabbed again and passed through all three loops that have formed on the hook.
4. Half single crochet. This is the simplest element. It is knitted without a crochet. The thread is grabbed through a chain link and passed directly through the loop on the hook.
5. Single crochet stitch. We do it as follows. We make a yarn over, then pull the thread through the chain link, and then pull it through the resulting loop and yarn over. There will be two loops on the hook. Grab the thread again and pull it through.
6. A double crochet stitch is knitted in exactly the same way, only we cast on two yarn overs at once, and pull the thread out three times, first through the first yarn over, then through the second and then through the starting loop.

As a result, the row gains height.

After five double crochets, we begin the decrease (see diagram above). The result is a wave.

Fashion trends

The relevance of headbands for several fashion seasons is associated primarily with the versatility of this accessory, its all-season use. The headband can complement any style of clothing.

Designers are especially fond of the solokha headband, bows, lace and classic plain headbands without decorative elements.

The accessory can have floral or geometric prints. Black and white remain in fashion, both together in two-tone headbands and in single-color accessories.

Model with openwork strapping

We crochet a headband. This allows you to experiment and add new details during the knitting process without returning to the beginning of the work. Let's consider the simplest model to implement.

We crochet a headband as follows:

1) Cast on 18-28 air loops depending on the thickness of the yarn and hook.

2) We knit all rows with single crochets, gaining height with the help of an additional air loop.

3) If desired, you can include columns with one or two crochets in the pattern.

4) The length of the headband can be easily determined by trying it on your head from time to time.

5) If you crochet the finished strip, it will become much more attractive. We carry out this series in accordance with the diagram presented below, which is used for design.

When the bandage is knitted, you need to close the loops and sew the edges. The finished product can be complemented with any decoration, for example, a hairpin or a piece of fur of the same shade as the yarn.

Knitted with your own hands, the accessory will warm you up during the cold season, and you can create it even without experience.

How to knit a headband from Alize PUFFY

I propose to knit such a headband with your own hands without knitting needles and a hook using Turkish Alize PUFFY yarn. It is very easy and quick to knit. This yarn is hypoallergenic, fluffy, and very pleasant.

How to knit a headband without knitting needles from Alize Puffy.

We count 27 loops (or another number. To find out, wrap your head with this thread, you will understand how many loops you need). Close into a circle by threading the next loop into the first. Then we go in a circle, as if closing the loops. We thread the first one into the last one, then the second one into the first one, then into the next one, and so on until the end of the row. Now we thread the loops in the order of 2-3 rows into the back wall of the loop. So that the ears are closed. When completing the work, we close the loops, passing them into each other. Cut the thread. The bandage is ready. This will take a few minutes. Wear it with pleasure. A headband for a girl can be decorated with beads, a flower, a bow or an applique.

You can knit a headband from this yarn in another pattern.

How to knit a headband with knitting needles.

Almost all headbands, when knitted with knitting needles, are knitted with a narrow scarf, and then an invisible seam is made or, conversely, a bright junction of the two ends in the form of a bow. What pattern to knit is up to you.

Comfortable, time-tested knitted headband.

This yarn is the simplest (we have 25 rubles per skein in our stores), knitting needles No. 3. Bandage on a woman's head.

Description.

We put 11 loops on the knitting needle. We knit 5 loops along the edges with garter stitch and 1 middle loop will be on the front side, purl on the second side.

In the front rows we add 2 loops in the center.

In the central part there will be such a distribution of stitches: 5 garter stitch, 3 purl, 6 braid, 3 purl, 6 braid, 3 purl, 5 garter stitch. There are 31 loops in total. Weave in braids in every 10 rows in different directions.

An empty cell in the diagram means there is no loop, repeat rows 21 to 30 the required number of times. I only got 15 overlaps in the braids.

We will decrease the loops as symmetrically as we added them. That is, we made the 14th overlap in the braids, knitted 2 more front rows and decreased 2 loops in the middle in the row (in those places where there were yarn overs).

When there are 11 stitches left on the needles, bind off all stitches. Sew the beginning and end of the bandage with a crochet hook or a gypsy needle.

Headband size for a woman's head. Tested on 18 dressings. (Everyone is running around!) You can knit the same headband for girls. Then use garter stitch to knit not 5, but 4 loops; braids can be made not from 6, but from 4 loops. It all depends on the age of the child and the desired width of the bandage.

How to knit a headband with a small pattern using the Vikkel technique.

This headband is knitted with adelia yarn (50 g = 95 m) 40 g, using circular knitting needles on short line No. 5.

Size 56. Bandage width 8 cm.

Very tight knit.

Description.

I will knit in 2 threads. The fabric is tightened by crossing the loops.

I cast on 68 loops + 1 to close into a circle.

In one row we knit the knit stitches crossed to the left, in the other – to the right.

1 row. Knit 1, *knit 2 cross to the left: first we knit the 2nd knit behind the back wall, then, without removing the loop from the left knitting needle, the 1st knit behind the front wall. Now we drop 2 loops from the left needle.* 1 knit stitch.

2nd row. *We knit the 2nd knit stitch behind the front wall, then, without dropping the loops from the left knitting needle, we knit the 1st knit stitch*.

Repeat these 2 rows.

The inlaid edge is slightly curled without being pulled over the head. You can start and end with an elastic band in rows of 3-4.

And I like it that way!

I offer several video master classes.

A practical option. If you choose a more brutal pattern, this headband is also suitable for men.

Children's version

In order for the bow to be tied not in the middle, but at the top, in the place where the jumper is made of 10 loops, it is necessary to make a loop into which the second end of the bandage will be inserted. It needs to be made so narrow that the tip can be inserted, but the bandage does not fall off during wear.

In my opinion, the most successful headband option for women.

Crochet headband with ears

Let's start knitting.

Drawing "Spiders":

• you need to dial 20 air loops (hereinafter VP);
• We knit the first row with half double crochets (hereinafter PStN) in each loop of the chain.
• Second row: 2 VP, put 6 loops on the hook as follows: one is already there, then make a yarn over, pull the next one from the second VP, the third from the first VP, then two links need to be pulled out from the main row. Then we knit the working thread through all six loops and create one VP.
• Next, the entire row is performed in the same way. We cast on the following 6 loops: one is already on the hook, we make a yarn over, we pull the third from the outermost link of the previous element, the fourth from the base of the previous column and we create two loops from the main row. Then we knit all six loops together and perform one VP.
• We perform the third row like this: 2 VP for lifting, skip one loop, knit two half double crochets in the next (hereinafter PStN), then skip again and again 2 PStN and so on until the end of the row.
• Continue knitting, alternating the second and third row.

After the knitted strip has reached the required length, the work should be completed, the thread should be secured and the ends of the bandage should be sewn.

Styles

A headband can complete any look. Thin braid headbands, knitted in an openwork pattern with knitting needles or a cross, with or without decorative elements, as well as the simplest headbands, are suitable for a bohemian style of clothing.

Wedding fashion also did not remain aloof from fashionable headbands.

Office style requires a woman to always be in business uniform. Therefore, headbands should not contain frivolous details.

For a rustic style of clothing, most of the known types of headbands are suitable.

The emphasis should be on the color of the yarn. Natural shades of brown, gray, blue and green will look good.

Stages of working on ears

1. We cast on 4 VPs and knit a loop into the first link of the chain, resulting in a circle.
2. Second row: knit 8 half double crochets, pulling the loops out of the ring.
3. Third row: 1 VP, 2 single crochets must be knitted from the 2nd loop. We knit two loops with stbn.
4. From the fifth loop we make three: 1 sc, 1 pst, 1 sc.
5. We knit the sixth and seventh stitches with single crochets and work 2 sc in the last loop.
6. We perform the third row in the same way.
7. Next row we tie the product with single crochets.
8. Next, you should knit a row with a contrasting thread.

Thus, we got one piece of the ear. The second is done in the same way.

At the end of the work, you should sew the finished ears to the main product.

As you can see, you can crochet a warm headband for a girl very quickly. This will take you a maximum of 2-3 hours, depending on your experience and length of service.

There are other options. The main thing is that the crocheted headband is bright and original.

Video lesson:

Summer headband

This knitted headband is made in openwork. It is knitted in transverse rows so that the elements of the pattern alternate with gaps, and as a result, when the number of rows reaches such a number that the headband reaches the size of the head circumference, all that remains is to connect its ends together with a thread so that the seam line is invisible.

You can attach a knitted flower to the front of the headband, which will greatly decorate it. This headband will not be hot; it can be used not so much for insulation as for decoration, and also in the summer to simply keep your hair in order.

Knitted turban headband

The oriental style in headbands is reflected in knitted turban and turban products. These hats are similar to each other. Historically, differences were in the amount of fabric used to make the headdress. A turban requires a multi-meter piece of fabric. There is also a difference in the type of tying with fabric. The turban covers the ears, but leaves the forehead open, sometimes hair is visible.

These two accessories in knitted headbands have few differences due to the specifics of their manufacture. Conventionally, for knitted products, the difference is in the width of the bandage. The turban covers the head more, and the turban is noticeably narrower.

It is possible to knit a turban headband with knitting needles in 1 evening.

For the bandage you will need:

• Yarn – 1-2 skeins.
• Knitting needles – 2 pcs + 1 additional.
• Needle with a wide eye.

Stages of work:

• You need to cast on 26 stitches on the knitting needles.
• The 1st row should be knitted with an elastic band, alternating 2 knits. and out. loops. We simply remove the first loop. We knit the last one. P.
• We knit a strip 20 cm long in this way.

• To create an overlap in the middle of the bandage, the fabric of the product should be divided into 2 strips, which will be performed separately. To do this, at the beginning of the row you need to remove the chrome. p, and knit the next 12 stitches with the main pattern. Having reached the middle, you need to unroll the work and continue knitting the next 19 rows using an additional knitting needle.

• Repeat knitting the pattern with the remaining strip. In this case, its length should correspond to 20 rows.

• In the middle of the bandage you need to make a crosshair of stripes. And using the third knitting needle, knit a common row according to the main pattern, connecting 2 strips.

• Next, you need to knit another 20 cm of fabric, after which the last row needs to be closed and the product sewn.

Solokha headband

The solokha headband has a playful look and is usually made of fabric, but it can also be crocheted and knitted. Any colors of yarn are suitable for this headdress, but it is better to give preference to bright colors.

To crochet solokha you will need:

• Yarn – 1 skein.
• Hook.

Completing of the work:

1. In the 1st row you need to cast on 3 loops and a double crochet, which is performed in the first loop.
2. The 2nd row consists of 3 air. loops for lifting. In the loop of the column of the bottom row you need to make 2 of the same columns.
3. Next, you should knit 5 rows in the same way as the previous row, adding a loop at the beginning and end. At the beginning it will be a chain of 3 air. loops, and at the end - a column.
4. In the 8th row all available loops are knitted.
5. The next 2 rows are knitted by decreasing 2 loops on both sides.

Continue knitting the headband with double crochets until the required length of the product. To correctly determine the length, you should apply it to your head during knitting. Without bow tips, it should match the circumference of your head. When the required length is reached, you should knit the second bow tip.

The knitting pattern corresponds to the previous description, but is done in the opposite direction. In the first two rows, add 2 loops. In the next row we knit a double crochet. according to the existing number of loops. In the remaining 7 rows you need to knit 2 loops in each row.

Original ideas for knitted headbands

An unusual headband allows you to emphasize individuality and a non-standard approach to fashion.

A bold option for cold weather. For this model, thick, warm yarn was chosen. In this case, most of the surface of the head is covered with a headdress. A knitted visor will protect your face from the cold wind and possible precipitation in the autumn-winter season.

A headband with a large decorative bow looks very festive. It will go well with the dress. If you knit such a headband from cotton threads, it will become a wonderful accessory for the summer.

The crown headband is suitable for those with long hair.

Even a classic headband model can be made original by decorating it with unusual elements. The headband is an accessory that is equally suitable for both newborns and adult women. The main thing is to choose the right color and style of this headdress.

Author: Vorobyova Nadezhda

Article design: Natalie Podolskaya

How to wear a knitted headband correctly

A headband is a universal headdress. It is suitable for those with short hair or long hair. It looks good both when the hair is tied up and when it is loose.

Regardless of the chosen style, the headband can be worn over the hair, or the hair can be let out at the top of the headband. If the headband acts as a hoop, then the extended bangs look impressive. When the hair is gathered in a ponytail or bun at the back of the head, the bangs do not need to be let out.

The “Turban” and “Turban” styles involve wearing the accessory over loose hair, or the hair should be tucked under the accessory.

Headbands with rhinestones

Rhinestones and other decorative elements allow you to give an elegant look to the headband. In addition, they help to update an outdated or tired model.

You can sew rhinestones onto a headband, following the chosen pattern, or without planning a special pattern, but symmetry should be observed. Here are some ideas for decorating knitted headbands.

You can also make a brooch for a headband from rhinestones, beads or beads.

To make the decoration you will need:

1. Felt or other thick fabric.
2. Faux leather.
3. Rhinestones, beads, beads.
4. Thread, needle, scissors, glue.

Stages of work:

• You need to transfer the selected pattern for the brooch onto a piece of felt.
• The perimeter of the pattern along the contour should be covered with beads.

• Next, the entire area of ​​the drawing is filled with the existing decorative elements.
• A piece of leather cut to the shape of the decoration should be glued to the reverse side. The edge of the product where the parts are glued must be closed by stitching it with beaded stitches.
• All that remains is to sew the finished decoration onto the headband.