Knitted leg warmers, 30 models with descriptions and knitting patterns, Knitting for children

Knitted leg warmers are indispensable for sports, dancing, and are comfortable to train in. You can buy knitted leg warmers in the store, but the price does not always correspond to the quality. We suggest you knit leg warmers with your own hands. This is not difficult to do by choosing a good description and high-quality knitting materials.

Where to begin?

You can knit leg warmers in different ways: on 2 or 5 knitting needles in the round. In the first case, you will need to knit a rectangle (or trapezoid) and sew it to form a “pipe”. Such a product will be less elastic than one knitted on 5 knitting needles. If you know how to knit in the round, then take stocking needles, but if you don’t know how, then it’s time to learn with a simple product.

Before starting knitting, take measurements:

leg circumference below the knee or above the knee, depending on the height of your product
calf volume
calf volume
height of leggings

Based on the measurements obtained, create a pattern. If you knit in the round, you won't need a pattern.

Knitting the simplest leggings for beginners

Undoubtedly, knee socks associated with beautiful braids or openwork patterns look beautiful. But what should those who do not yet know how to knit complex patterns do? Or do you just want a minimalist model? For beginners, we recommend knitting with a simple pattern - rib 1*1 or rib 2*2 (alternating knit and purl stitches). At the top and bottom of the leg warmers, tie the elastic band tighter; to do this, take knitting needles 1 size smaller. The elastic is needed to prevent the knee socks from slipping while walking or running.

How to strengthen an elastic band when knitting?

In factory-made products, spandex is often added to the elastic so that it does not stretch during wear. We also recommend that you buy spandex threads from a craft store and add them when knitting the last row. Or you can lay one line with spandex along the inside, see photos with different options for using spandex:

What to wear with knitted leg warmers?

Warm gaiters will warm your legs up to the knee and above in cold weather. It is better to wear them with short dresses, shorts and skirts. It is worth choosing special shoes for them.

Leg warmers are worn over sneakers, sneakers and short ankle boots.
Also, high knee socks can peek out from the boots, then the top of the boots should be wider than usual.
Since this is an additional accessory, you should think through your entire look so that knee socks go well not only with shoes, but also with outerwear.

Today we have prepared an excellent selection of patterns and descriptions for knitting a wide variety of leg warmers.

What golf options can be linked

Having learned how to knit a basic pattern and mastered the basic principle, you can use different combinations of colors and patterns to bring any options to life.

Openwork knee socks

A base made with an openwork pattern can decorate both a child's and an adult's shin.

Knee high socks with a pigtail in the center and a color transition:

High golf models are called leg warmers and are often used for dancing, training and at home.

Video tutorial: knitting openwork golf

Jacquard and Norwegian patterns

An interesting variation with deer. Detailed description in the photo:

Norwegian black and white stars.

Seamless knee socks with two spokes

A simple option for beginners. The instructions are given in full. Adjust the size by decreasing stitches.

Video: Knitting knee socks with a braid

Knitted leg warmers for adults

Oliva set: leg warmers for women and knitted mitts

Hello! My name is Svetlana Kolosova. I am engaged in the production of designer knitted products and today I would like to present to you one of my works - the “Oliva” Set. The set is knitted from German wool blend yarn VITA Brilliant (100g/380m) in 2 folds

Knitted high leg warmers, Maria's work

Good afternoon I would like to bring to your attention gaiters-botfords. Knitted from “Lana Gold” threads from the Turkish company “YarnArt”, it took 200 grams. A set of 40 loops (bottom) during the knitting process, 20 loops are added = 60 loops (top). We knit with an elastic band 1x1 5 cm

Knitting short leg warmers for beginners

We insulate the legs. Gaiters will replace high boots with short winter boots. Knitted with vertical two-color English elastic knitting needles in the round. The rules for knitting leg warmers are simple: we change the color of the threads in each row, and we knit, alternating only two rows (the number of loops is

Leg warmers/knee socks with deer

Legging sizes: 35/37-38/40-41/43. Foot length of leg warmers: 22 – 24 – 27 cm. Product length: 48 -50 – 52 cm. To knit leg warmers you will need: 150 g of natural white yarn (75% wool, 25% polyamide, 205 m/50 g) and 100 G

Warm women's leg warmers knitted with knitting needles

Gaiter sizes: S/ML/XL. Leg warmer length: 60-62 cm. Materials: 300-350 g of “Drops Kagisma” yarn (100% wool, 100 m/50 g); stocking needles No. 3.5 and No. 3. Knitting density of leg warmers: 22 p. and 30 r. persons satin stitch = 10×10 cm. Pattern:

Women's leg warmers knitted with arans and braids

To knit leg warmers you will need: DROPS Karisma Superwash yarn 300 g for all sizes, color # 55, (light brownmix - light brown). Toe knitting needles 3.5 mm. Knitting density: 22 loops x 30 rounds in stockinette stitch = 10

Black leggings with zipper

Black leggings with a zipper knitted with knitting needles. I don’t know if zippers are really necessary in these leggings, but the model is cute. If you wish, you can knit these leggings without a zipper. You will need: “Popular” yarn (50% wool, 45% acrylic,

Gray knitted leg warmers with ruffles for women

You will need: Nako Baby yarn (25% wool, 75% acrylic, 130 m/50 g) -200 g sulfur, leftover lilac, a set of stocking needles No. 3, hook No. 2.5, auxiliary circular knitting needles. Cast on 84 sts, spreading over 4 needles

High leg warmers with a relief pattern

You will need: yarn “Podmoskovnaya” (50% wool, 50% acrylic, 250 m/100 g) -200 g pink, knitting needles No. 4. Relief pattern: 1st row (front) – chrome. p., 3 p. n., *2 persons. p., 6 p. p.*, repeat *-*

Knitted women's leg warmers

Knitted leg warmers pulled over boots or shoes are being worn by many designers this season. You will need: "Children's" yarn (70% acrylic, 25% viscose, 5% bulk acrylic, 175 m/50 g) - 150 g melange, knitting needles No. 3 and No. 4.5. Basic

Openwork high leg warmers knitted

Knitted leg warmers are perfect for people who love experiments, for those who cannot resist a fashionable novelty. You will need: 200 g of yarn (100% purified wool; 50 g/150 m) raspberry color. Stocking needles No. 3.5. One size. Patterns

Men's footwear and leg warmers knitted

Men's slippers - footwear and gaiters with knitting needles. I knitted it as a gift for my brother in size 43 feet. He likes the sock to have a high top (essentially knee socks). At the same time, he has a “unique talent” - to wipe holes instantly

White leg warmers, knitting

Sizes: S/M – L/XL. Gaiter length: 40-42 cm. Materials: 200-250 g yarn (100% alpaca wool, 167 m/50 g) “Drops Alpaca” type from Garnstudio; stocking needles No. 4. Knitting density: 19 sts and 25 rounds, knit rows. double surface

Description of knitting golf

Using white yarn, cast on 108 loops and join them into a circle. Knit 4-5 rows in stockinette stitch, then form cloves. They are created as follows: 1 yarn over, 2 knit stitches together.

Then they knit another 4-5 rows in stockinette stitch, bend the knitting in half along the openwork row, and before each loop, take one loop from the cast-on chain on the knitting needle and knit it together with the knit stitch. It is necessary to ensure that the loops coincide vertically, otherwise the edge will be crooked. An elastic band is threaded through this double edge. In the next row, every 5 loops, pick up a loop, knitting one loop twice - 1 knit, 1 crossed knit. So, there are 130 loops on the knitting needles. One row is still knitted with white yarn, then 2 rows of the pattern (Fig. 2) are knitted from medium-dark green and brown yarn. The next 7 rows are knitted with light green and brick yarn, 2 rows with completely light green yarn without a pattern. The pattern continues with 7 rows of medium green and 2 rows of dark green and brick yarn.

When the Christmas tree pattern of brick and green yarn is completed, knit 5 rows with white yarn. In the first row, 8 loops are decreased throughout the entire product, that is, in the middle and at the end of each knitting needle, 2 loops are knitted together.

Then follow stripes of white and green yarn of all shades as shown in Fig. 3. White check - white yarn, black check - the darkest shade of green, a cross - a lighter shade, an oblique stripe - an even lighter shade, two stripes - the lightest shade of green yarn.

These plain stripes and small pattern can be knitted according to the pattern, or the colors and width of the stripes can be selected to your liking.

When the length of the golf has reached 15 cm, the next 8 cm continue to be knitted in decreasing order. Decrease 17 times in a loop in every third row at the beginning of the first knitting needle, knitting 2 loops together with removal. At the end of the fourth needle, 2 loops together with a knit stitch.

Then they continue to knit another 8 cm without decreasing until the beginning of the heel, when they continue to knit the heel with white yarn on 88 stitches. Heel formation. All stitches are distributed evenly on 4 knitting needles. The heel is knitted with only two knitting needles - the 1st and 4th. In each front row, 1 loop is knitted, 1 is removed without knitting, in the back row all loops are purl.

In the quadrangular part of the heel, the number of rows should be equal to the number of loops on 2 knitting needles. The first loop is always removed without knitting, a chain is formed along the edges of the heel.

When the required length of the straight part of the heel is connected, the formation of the heel begins. All heel loops are divided into 3 equal parts. Only the middle part is knitted, the sides are reduced. Working from the wrong side, purl the last loop of the middle part with the first loop of the side part. Turn the work and knit the middle part with knit stitch, the 1st loop is always removed undone. When knitting from the front side, the last loop of the middle part is removed as in knitting, the 1st loop of the side part is knitted with the front one and the removed loop is put on the knitted one. The decrease is continued until only the middle part remains on the knitting needles. Reducing loops on the foot. After the heel is knitted, the side loops of the chain should be cast on the knitting needles (Fig. 4). To prevent holes from forming on the sides, the cast-on loops should be knitted crossed. Having counted the loops on the knitting needles, we make sure that their number is greater than before knitting the heel. All excess loops should be closed off. Decrease on the same knitting needles on which the heel was knitted. Decrease at the end of the 1st knitting needle, knitting 2 stitches together, and at the beginning of the 4th knitting needle with removal. Between each decreased row, knit 1-2 rows without decreasing. The decrease is continued until the number of stitches left on the knitting needles is the same as before the heel began to form.

The straight part of the foot is knitted up to the little toe.

Reducing stitches on the toe. In this case, the decrease at the toe forms a triangle. At the end of the 1st and 3rd knitting needles, the penultimate two loops are knitted together, and at the beginning of the 2nd and 4th knitting needles, one knitting loop is knitted, then 2 loops are knitted together. Decrease is repeated every second row. When half the stitches remain on the knitting needles, decrease in each row. Thread a previously torn thread through the last 8 loops and secure the end.

Knitted leg warmers, models for children

Knitted leg warmers for girls

For knitting you will need: 50 g each of JUVEL yarn (100% wool: 50 g/106 m) No. 00722 red, No. 00749 pink, No. 00547 green, No. 00645 yellow, No. 00182 purple and

Poncho, scarf and leg warmers for girls

For knitting you will need: 400 g for the poncho and 200 g each for the scarf and leg warmers of camel-colored yarn Mondial Merino Plus (52% merino wool. 48% acrylic. 125 m/100 g); direct and auxiliary knitting needles

Funny set: hat and leg warmers knitted

Set size: for 4 years. Difficulty level: easy. You will need: 280 g of medium thickness yarn (50% acrylic, 50% wool) purple. SPOKES No. 5. PATTERNS: Elastic band 1×1. Fantasy pattern: 1st row: 1 purl. p., *1 persons. P.,

Crochet

Having studied the patterns for knitting leg warmers with knitting needles with a description, you can move on to crocheting, which also allows you to knit an analogue of the knee socks without socks in the round. Crochet produces a fairly dense fabric that will fit well around the ankle.

To work you need to take:

a ball of plain yarn of medium thickness - 100 g;
hook number 3.

Knitting description:

The main pattern will be “elastic”. Cast on 36 chain stitches for one product and knit two rows with single crochets.
Make a rise to the next row by knitting a row with a single crochet.
In the second row and in each even row, continue to knit 2 single crochets, 1 loop, knit the loops from the previous row diagonally.
The rapport is repeated until the end of the work.

This product can be knitted in the round or as a fabric, which then needs to be sewn.

Using simple patterns with simple patterns, every novice needlewoman will be able to knit simple and beautiful socks that will help emphasize the style and individuality of her image.

Knitted leg warmers, models from the Internet

Leg warmers for choreography, online knitting lessons

We start knitting with an elastic band 2*2. Kauni yarn 8/2 with knitting needles 3.5. Knitting density: 10 cm 24 loops.

Online follow the link

The simplest knitted leg warmers (for beginners) for sports and dancing

Length: 40cm For knitting you will need: • 100g of bright pink Regia yarn (6 strands; 75% wool, 25% polyamide, 210m/50g). • set of double needles No. 3.5–4. Knitting pattern. Elastic band: knit alternately k3, purl 2. Knitting density: 22p. and 30 circular rivers. = 10x10cm. DESCRIPTION Dial freely 60p. and tie with a 40cm elastic band, close the loops according to the drawing

Slingogaiters with Norwegian pattern

The author of the work is Marionika from the Country of Mothers.
Yarn Pekhorka “Children's whim” in red and white colors (50% merino wool, 50% PAN (fiber), stocking needles No. 3. Knitting pattern

White leg warmers with braids

Dimensions: length 68.5 cm, hip circumference 45.5 cm. You will need: 3 skeins (40 g / 140 m) acrylic/wool, white. Circular knitting needles 5.5 mm, 30.5 cm long Use a knitting needle for braids, stitch markers Density: 16p* 18 r = 10*10 cm on knitting needles 5.5 cm with a ribbed pattern.

Description of the knitting process

Elegant leg warmers for fashionistas

Size: Approximately 25.5 cm in circumference at the widest part and 57 cm in length.

Materials:

3 skeins of Brown Sheep Nature Spun Sport yarn (100% wool, 50g/168m)
double needles 3.25 mm

Density of work: 28 p. and 37 p. = 10 cm, purl. smooth surface

Types of patterns:

crossed elastic band (number of stitches is a multiple of 2): o 1st circle. r.: *1 persons. crossed, purl 1; rep. from * to the end of the river o Always repeat this circle. row.
"rhombus" pattern: according to the diagram.
"twisted cord" pattern: according to the diagram.
"weave" pattern: according to the diagram.

Description of work

Knitting pattern

Gaiters with tassels

Leg warmers with embossed pattern

Fun striped leg warmers for dancing

Two models of women's leg warmers knitted with knitting needles

Jacquard pattern for leg warmers

Simple and bright knitted leg warmers for dancing

Master class No. 1

We will start with the simplest lesson, which is suitable for complete beginners. You will need:

2 skeins of Galway yarn (each skein contains approximately 190 meters of thread);
circular knitting needles N6;
knitting marker.

KNITTING DENSITY 24 loops and 16 rows = square 10x10 cm.

PRODUCT SIZE Length - 40 cm, width (unstretched) - 27.5. The diameter of the elastic at the bottom edge of the leggings is approximately 13 cm.

Tip: the number of stitches cast on should be a multiple of 4. Therefore, if you want to increase (or decrease) the width of the leggings, simply increase (or decrease) each row by the number of loops that is a multiple of 4.

ABBREVIATIONS l.p. - front loop; i.p. - purl loop;

KNITTING PATTERN

Round 1: *2 loops, knit behind the back wall of the loop, 1 loop*, repeat from * to *.
Circle 2: *2 l.p. together, yarn over, 1 p.p., 1 p.p.*, repeat from * to *.
Round 3: *3 s.p., 1 s.p.*, repeat from * to *.
Round 4: *1 l.p., yarn over, slip two loops on the right needle, transfer them again to the left knitting needle and knit together behind the back wall of the loop, 1 i.p.*, repeat from * to *.

DESCRIPTION OF WORK

Cast on 48 stitches on the knitting needles, join in a circle, and put on a marker. Knit 5 cm with an elastic band (alternating 2 stitches and 2 stitches).
Knit another 10 cm with the main pattern, then start adding loops: to do this, in every 4th row, add one loop to the left and right of the marker. Repeat 8 times (you should have 64 loops).
Next, continue knitting with the main pattern. After you knit 30 cm, start decreasing the loops - to do this, decrease 1 loop to the right and left of the marker in every second row. Repeat 2 times (you should have 60 loops left).
Tie the remaining 10 cm with an elastic band.
Cast off the loops, tie a knot and cut the thread.

And this is what we got: