A cape on the shoulders using the example of capes for daily use, children's and wedding

We knit a stylish cape on the shoulders with a description of the work and patterns

This comfortable and very light knitted cape will suit any dress or sundress.
Necessary materials:

• 4 skeins of Silk Pearl yarn;
• knitting needles 4.5 mm;
• hook 4 mm;
• loop holders.

The total volume of the product is designed for size S.

The mesh pattern is performed according to the instructions provided:

1) 1 front row: knit to the last loop + 1 purl behind the back wall;

2) Purl row 2: 1 knit stitch + 1 purl behind the back wall + 2 knit stitches together. Then repeat 1 purl behind the back wall + 2 knits together until the last 1 purl behind the back wall.

The cape pattern looks like this.

Knitting instructions:

1) We start from the back. Use knitting needles to cast on 140 stitches without tightening.

2) We knit with a 35.5 cm mesh pattern.

3) In the last row we knit 49 loops according to the pattern and transfer them to the holder.

4) Close off the next 42 loops, and tie the remaining 49 and transfer them to the holder.

5) Move on to the front part of the product. We knit in the same way as the back, only at a height of 30.5 cm. In the 88th row we make a cutout for the neckline. We do it as follows: we knit the first 55 loops, then attach the second ball and close the central 30 loops very loosely from it. We tie the row to the end.

6) Now we knit each part from different balls, closing for the neckline on both sides 1 loop in each row 6 times.

7) Transfer the remaining 49 loops on each side to the holder.

We sew the shoulder seams by closing the loops using three knitting needles.

9) Sew the side seams, leaving armholes for the sleeves.

10) On the front side of the product, we crochet 2 rows with a half-column along the bottom edge and along the sleeves.

11) We tie the edges of the neckline in one row with a half-column.

The knitted cape with a mesh pattern is ready. Now it can take pride of place in its creator's wardrobe.

Ponchos and capes. Ideas, patterns, sewing. + 3 videos.

Ponchos and capes. Ideas, patterns, sewing.
+3 video I’ve recently become addicted to all kinds of ponchos, capes, capes. Comfortable things - throw them on and go))) And for me to accompany my child to school in the morning is just the thing))) And you can not only knit them, but also sew them - it’s easy and fast. In the new season (from those on sale for February 2021 in boutiques), most designers offer ponchos, capes, capes - so this is still fashionable and relevant.) For example. by RALPH LAUREN BLACK Asymmetrischer Pullover im Cape-Stil,1.187,37 €

Mostly the models are simple, no frills - apparently the emphasis is on quality and color..

Below is a selection of my hamster supplies collected in my computer folder))) Poncho with leather trim Donna Karan, $1645

More from CHLOÉ

Cape from Jabotian Couture S/S 2014

Allow 1.5 cm for the connecting seams, and 4-5 cm for the hem, if the bottom of the poncho will not be framed with fringe, fur or treated with bias tape. The length of the poncho can be changed as desired, depending on your height and the intended model; it can be from hip to knee level, but these are average figures. You, knowing and remembering the uniqueness of each figure, will choose your length.

We fold the fabric in half and draw a semicircle, by the way, it somehow reminds us of a drawing of a skirt - the sun, doesn’t it? We cut out the shape of the neckline, the cut for the fastener and that’s it – the cut is complete!

Next, there are “variations on the theme”... You can model a poncho in such a way as to make a belt and stretch it through through cuts at the waist level, treat them with elements of suede or leather, or you can simply leave it as is (if you are sewing from thin fabric and not think about the indispensable warmth of the product). The poncho option with a fastening bar along the entire length of the front is also very beautiful.

Cape pattern. It is built on the basis of a base pattern

We close the shoulder dart by converting it into a waist dart. Now, we combine half of the sleeve (set-in shirt) with the base and outline everything with a general outline. We do the same with the back, raising the pattern of the base of the back a little, combining it with the back half of the sleeve and outlining everything together.

Trying to make a baby blanket for your shoulders with your own hands

A white children's cape on the shoulders will make any baby a real little princess.
And what mother wouldn’t want to please her daughter with new clothes, especially those made with her own hands? In addition, creating such a cape will not require much time and effort. Necessary materials:

• 50 g of yarn;
• crochet hook No. 2.

The product is knitted according to the following pattern.

Knitting instructions:

1) We collect a chain of 120 air loops.

2) We knit three rows with the “Fan” pattern.

3) Then we count 4 fans from both ends (three for the sleeves, 1 for the transition). On the remaining fans we knit 7 more rows of the same - this is the back of the cape.

4) Stepping back from the edges in three fans, we knit the top of the front side of the product. We start with three fan patterns, decrease by one every other row, and end with one fan.

5) Now we make the lower part of the cape. From the chain of air loops we cast on the same pattern and continue knitting until the required length is obtained.

6) We tie the edges of the product with fans of 7 double crochets on an air loop.

7) We knit the sleeves according to the same principle: from the chain of air loops we knit up and then down to the desired length.

Attach the sleeves to the main part of the product.

A cute cape for a girl is ready. Such a gift will definitely please its little owner.

How to sew a poncho with your own hands: step-by-step guide

Anyone can sew a poncho on their own. To do this, it is enough to be able to hold a needle in your hands and do the work accurately and accurately.

Cutting fabric

Cutting the fabric is an important part of making this item. Moreover, it is important to take into account the correct layout of the pattern according to the prepared material. It will depend on the width and length of the fabric cut.

Important!

When placing parts on the canvas, do it in one direction.

We sew a poncho with our own hands

The simplest version of a poncho does not require creating a pattern. Just follow the instructions below:

1. Take a piece of fabric measuring approximately 120x120 cm.
2. Cut a round hole with a diameter of 20 centimeters strictly in the center.
3. Make a small cut (about 10 cm) in the center of the front from the neckline.
4. Finish all sides with bias tape.

If you wish, the resulting item can be decorated with fringe or elegant embroidery along the hem. A decor made from appliqué, a pattern of sequins or beads would look good. If you combine fabric and decor correctly, you will get a wonderful new thing for a festive evening. For everyday use, you can make simpler models.

For cold weather, sew yourself a poncho from warm fabric with faux fur trim:

1. Buy warm fabric (fleece works well).
2. Cut it according to the pattern below.
3. Sew the side seams.
4. Connect the front and back neck facing pieces together.
5. Next you need to sew the neckline.
6. Turn over and sew the bottom.
7. Sew fur edging and external fasteners, preferably of an unusual shape.

Now you can sew a poncho for any weather.

Making a beautiful addition in the form of a shoulder cape to a wedding dress

A white wedding stole, made by yourself, will decorate any bride.
It looks very gentle and attractive on the shoulders of any girl. This accessory is created by crochet, and therefore allows you to decorate the product with original openwork patterns. In addition, if the bride wishes, it can be additionally decorated with white beads, satin bows or ribbons. Necessary materials:

• 200 g of yarn (it is desirable that its composition be combined: merino wool + polyamide wool in a ratio of 50:50);
• hook No. 1.75.

Below are patterns for knitting a wedding stole: pattern diagram + symbols.

1) First, we cast on a chain of 112 air loops.

2) Follow pattern 1 in knitting the pattern.

3) When the length of the product reaches 180 cm, you can finish the work.

4) If desired, we tie the edges of the cape with a fan border according to the following pattern.

This wonderful wedding stole will not only decorate the bride even more, but will also show her off in the best light as an inventive needlewoman.

How to easily sew a poncho with your own hands

Not all needlewomen have enough sewing experience to make complex poncho models. But it doesn't matter. After all, there are quite simple types.

The simplest thing is to sew a round poncho.

1. Take a piece of fabric and shape it into a circle.
2. Then draw it into four equal parts.
3. Draw a circle for the neck in the center.
4. Cut on one side, this will be the front line.
5. Finish the edges with bias tape.

If desired, sew on a stand-up collar. If you want, you can decorate with decorative elements. This type of tailoring can be used to create both warm and light clothing. It is comfortable to wear. Hides figure imperfections.

Another option for a fur poncho would be a model with a one-piece hood . By adding elegant clasps, you will get a very elegant item.

Another interesting version of this thing will work if you make it double-sided. For this:

• cut out identical parts from two different materials;
• then fold them with their front sides facing each other and sew them together, except for the neck area;
• turn the resulting part inside out and iron it;
• Carefully sew up the neckline.

It is advisable to trim this item with contrasting material along the neckline and edges. The beauty of this type is that this thing can be used in two variations, which means you won’t get tired of it for longer.

Important!

When selecting fabrics, consider the compatibility of the two selected colors.

You can also decorate this model with lace or ready-made applique. This model will be well complemented by faux fur trim.

How to sew a fabric shoulder cape

To do this you will need:

• Fabric (in this example, fleece is used);
• Clasp;
• Super glue;
• Scissors;
• Metal rivets.

First, fold the fabric into a square so that there are 4 layers. Next, one corner is cut in a circle.

Next, you need to unfold the fabric and cut out the neckline. In order not to make a mistake with the required neckline, first you should measure the distance from shoulder to shoulder, the resulting result is divided in half and plus 3 centimeters.

Now we cut the front layer in the middle.

The next step is to attach the rivets. In the place where we are going to place the rivet, a clove is stuck in and bent on the reverse side. We coat the leather straps of the fastener with glue and press them against the front strip of the workpiece. The process is shown in detail in the photo:

All that remains is to make holes for the arms, and the women's cape is ready.

It is worth noting that the same model can be made only with a hood.