Size chart for men's sweatpants and how to determine by eye?

Every man has several pairs of trousers in his wardrobe. To look respectable and confident, it is important to choose the right size for this item. Having studied the data on the label, you can start trying on; only in this way will you determine whether the trousers “fit” your figure well, or whether it is better to look for another copy.

Although online shopping is fast and convenient, it has one drawback: you cannot try on an item and evaluate how accurately it matches the buyer’s parameters. To avoid getting into trouble, use a table that shows several body measurements. This will help you choose pants that are most likely to fit well.

Determining the size

You can find out what size pants you wear by taking a few measurements. This:

• Waist circumference . The measuring tape is laid at the level of wearing the belt.
• Hip girth . The tailoring tool should be pulled horizontally to the floor line, capturing the convex areas of the buttocks.
• Length of the product . The length from the groin to the desired length of the trouser leg along the inner seam is taken into account.

If you buy classic trousers in a store, then it is enough to know the first two parameters; if you prefer online shopping, you cannot do without the length of the trousers. When taking measurements, pay attention to how you stand, because the accuracy of the measurements depends on this. First of all, do not pull in your stomach, otherwise your waist circumference will be smaller than it actually is. It is better to involve an assistant in the process, for example, a spouse who is familiar with a measuring tape and knows how to use it.

Men's trouser sizes

The absence of an assistant should not affect your plans. In this case, take the trousers that match your measurements and lay them out on a hard, horizontal surface. Armed with a tailoring tool, measure the distance on the belt from the left side to the right. The button should be fastened and the ribbon should lie freely. Multiply the result by two, this will be your waist circumference.

To find out the size of sweatpants, use the formula - FROM: 2 + 6 cm. For example, the waist is 84 cm, dividing it in half, we get 42. Add 6 to the result, the total is 48. This means that sweatpants need to be looked after on the 48th size.

Defining parameters

To determine your pants size, you need to measure the parameters correctly. For trousers, the following indicators may be required:

• waist circumference;
• hip volume;
• leg length;
• height.

Measurements are taken in underwear. Straighten up, maintain your posture and relax. To measure the waist and hips, the measuring tape is held parallel to the floor.

The basic indicator is waist circumference. It is present in every size chart. Some manufacturers take half-girth as a basis - the measured value is divided by 2.

The waist circumference is determined as you exhale, but you don’t need to relax your stomach too much. The measuring tape is held at the level of the navel, where the bottleneck is.

Measure your hips at their widest point. At the same time, the legs are placed straight and closed. The tape does not need to be too tight or too loose - it is ideal when one finger passes between it and the skin.

Not all manufacturers indicate the length of the trouser legs. They measure it differently. More often, the length is determined by the inner seam, less often by the side seam. In the second case, the seat height of a particular model is important.

Another possible measurement is the width of the trouser leg. This is especially important when your trousers are tight.

The landing height is also taken into account. More often it is indicated by foreign manufacturers. Measurements are taken from the center of the crotch seam. The seat height in the front is designated front rise, in the rear – back rise. Specify parameters in inches.

Important! When choosing pants, it is important to find out not only the measurements, but also the composition of the fabric. Some materials exhibit significant shrinkage, so a reduction of 1-2 sizes is possible.

Size correspondence table

If you need to know what size pants you need to buy from an online store, take a look at the table. With parameters 84-100, choose a wardrobe item where the number 48 is indicated on the tag. Moreover, it will be true both for domestically produced items and for those that were sewn in European countries (Germany, France).

An equally important parameter when choosing clothes for men is the height of the model. Domestic manufacturers take it into account when labeling their products and indicate it on the label along with the half-waist circumference. For example, 52/176. Men whose height is below 170 or above 190 cm should choose their trousers especially carefully. Despite the standard volumes (OT and OB), it may turn out that the item of clothing will be either too short or prohibitively long.

Height on the label is indicated at intervals of 4 cm. Let’s say that a man with a height of 168 cm will fit a model marked 166-170, and for those tall 184 cm, trousers with a mark of 182-186 are intended.

Manufacturers of men's clothing, located in different countries, prefer to use different size numbering systems. That's why, when buying things online, you can easily make a mistake with your choice.

How to determine the size of a men's tracksuit

Domestic sizes of men's tracksuits range from 42 to 60. International sizes, which are designated in Latin letters, start from XXS and end with XXL.
Size chart for men's sports sweatshirts and sweatshirts

To determine his size, a man needs to take the following measurements, which can easily be used to determine the size of a tracksuit using the size chart:

• Height . The measurement is taken in a standing position with a straight back from head to toe. In size tables its range is 165-195 cm.
• Chest circumference and. Measured across the nipples at the widest point of the chest. The value of the indicator varies from 88 to 124 cm.
• The length of the sleeve . Measurements are taken from the shoulder girdle to the wrist using the arm slightly bent at the elbow. The manufacturers' grid contains values ​​from 74.5 to 84.5 cm.
• Inner seam length . A tailor's tape measures the distance from the groin area to the heel on the inner surface of the leg. This parameter has a range from 80.9 to 92 cm.

Size chart for men's sweatpants

Important! It should be remembered that some models require the measurement of additional parameters that must be noted in the manufacturer’s table.

What trousers should I buy abroad?

Large European and American brands try not to deviate from the sizing charts adopted in their countries. It will be easy for our compatriots to decide on the size of trousers in France or Germany, since it fully corresponds to what we are used to buying in our homeland.

However, difficulties arise when selecting pants that are numbered according to the grid that is typical for jeans. That is, two parameters are taken into account: waist circumference (W) and pant leg length (L). Even more confusing is that they are designated in inches. The formula will help you calculate the appropriate size: domestic - 16 units. For example, on domestically produced trousers we see the number 52, subtracting 16 from it, we get 36. This is what you need to look for on the label when shopping abroad.

You cannot do without a table if the manufacturer uses an international letter system for labeling. From it it becomes clear that size 52 corresponds to L.

How to take measurements?

If a man does not have the opportunity to try on trousers in a store for a long time and carefully, selecting their ideal size and fit, you can simply order the desired model through the online store. Joint purchases today are gradually replacing actual shopping trips, as this significantly saves both a man’s personal time and his financial resources. All that remains is to learn how to calculate the sizes and take your measurements correctly.

To measure his parameters, a man needs to determine three indicators:

• length of the legs from the inside of the seam;
• waist circumference;
• circumference in the hip area.

To calculate the first measurement, a man needs to use a measuring tape, which is applied to the groin area, stretching to the very bottom.
You can measure the length of the inner seam of future trousers directly on a man, or you can measure on old trousers that fit perfectly on a man. You can measure your waist area by attaching a tape to the waistband of old trousers and multiplying the figure by 2. Tip! If a man measures the three indicated parameters on old trousers that fit him in size, be sure to perform the steps on a washed item so that it does not stretch, allowing for errors.
And to determine the volume of the hips, a man needs to grab the most convex part in the buttocks area with a measuring tape. Only after this the resulting three numbers in centimeters need to be compared with the data offered by the standard size chart. Today, different countries offer their own individual methods of calculating sizes, measuring units, as well as sizes in tables.

Choosing the right style of trousers

A man with a thick and overweight build should opt for a straight-cut model with a slightly low waist without creases on the legs. If you have a tall, thin figure, trousers with cuffs will look harmonious; they visually shorten your legs. In both cases, take into account the length of the product; it should be such that your socks do not show when walking. When trying on a piece of clothing in the store, pay attention to the length of the trouser leg: at the back, its edge should reach the beginning of the heel of the shoes, and there should be no transverse folds in the front.

Make sure that your pockets do not bulge when you wear them, and do not clutter them with unnecessary items. All you can afford to put in them is a wallet.

How to choose women's trousers?

If you have decided on the size, you can proceed to choosing the style of trousers. Depending on your figure, you need to choose different trousers. For example, tall girls can choose shortened models, but such models are contraindicated for short ladies, but high-waisted trousers will look ideal. If you don’t have enough volume on your hips and buttocks, choose trousers with appliqués and decorations on problem areas - this will make your hips visually wider. And if you want to narrow your hips, then flared trousers with arrows are the best option.

Little-known facts from the history of trousers

• The Iranian Scythians are the first people on earth where men began to wear the lower part of clothing, similar to modern models of pants.
• In Ancient China, only brave warriors wore trousers.
• To create comfort during long horse riding, Prussian soldiers began to have leggings sewn on them - tight-fitting trousers made of deer or elk skin.
• The trousers and breeches were named after historical characters. The first comes from the nickname of an Italian comedian, the second from the surname of a French army general.
• Aristocrats of the 18th century did not wear long trousers; such models were intended only for unskilled workers.
• European fashion, including the lower part of the suit, was introduced into Russia by Peter the Great. Until 1670, men dressed in trousers, which were sewn from two pieces of cloth and united by a rhombic fly.
• Until the 40s of the 19th century, men's trousers were sewn in one size and adjusted to the parameters of a particular consumer using a belt and suspenders. It was for this reason that the products looked baggy.

On the “flares” that were popular in the 70s of the last century, exactly 7 folds should have appeared (according to the number of oceans). This was precisely the opinion held by fashionistas who walked the streets in wide pants.

What to do if a description is not added

We all understand that it is quite difficult to keep track of all the items in your store, so sellers do not always have time to add descriptions to products on time. Therefore, there is another option for how to find out your pants size on Aliexpress - write to the seller himself:

The message must be written in English, but if you do not know it at an advanced level, it is better to seek help from a translator. The message must include all your measurements and wishes. The seller, based on all the data, will be able to choose the ideal size for you.

If a table of sizes of women's trousers on Aliexpress is not given, then you can use the “help of the hall”. Look at the reviews, usually girls, in order to help the rest of the buyer, leave a fairly detailed review, which indicates their real Russian sizes and those that they select on the site.

There is another way to choose the size of pants on Aliexpress - for those who have already purchased and received the product. Unfortunately, this service is only available in the mobile version. It is located at the very bottom of the page on which the product is located:

Of course, it’s better to use all the methods at the same time, so you’ll never go wrong with the size and buy something that fits you perfectly. Always remember the famous proverb: “Measure twice, cut once.”

How to determine your clothing size

Subscribe so you don't miss anything important

Channel in Telegram