Headgear size (table for adults), how to determine head size

Headwear size chart

First you need to familiarize yourself with the international table of hat sizes.

To determine the size of the hat using the table, you should measure the circumference of your head and find the corresponding value. You will need one single measurement - the length of the OG (head circumference). All measurements should be carried out using a centimeter or thick thread and then transferring it to a ruler. Head circumference is measured just above the eyebrow line. The average Russian parameters for men's hats are 58-60.

Foreign manufacturers take the diameter of the head, rather than the girth, as the basis for measurements. Foreign size charts show measurements in inches. The diameter can be easily determined using the school formula D=C/π, where C is the circumference and π=3.14. For example, the head circumference is 23 inches. We calculate the diameter 23/3.14 = 7.32. This value will correspond to the foreign format XXL, Russian 59.

Table of ratios for different countries

To determine your size, you can use the tables used in Russia, Europe or Asia.

It is easy to notice that the sizes used in Russia are based on head circumference in centimeters. As for the Asian table, it is not worth highlighting separately here, since in China and other countries the sizes are either international format or Anglo-American, focused on head circumference in the inch system.

Custom sizes

If your parameters do not fit into the table above, then you should use a non-standard sizing chart. For men, large formats include 63-65. To determine the size of the hat you will have to calculate additional parameters:

• longitudinal arc line;
• measurements of the transverse line of the head.

The longitudinal arc line represents the distance from the depressions above the eyebrows to the middle of the back of the head. Measurements of the transverse line of the head - the distance measured through the crown of the head from temple to temple.

Features of size tables

Most sizing charts from domestic manufacturers only take into account head circumference, measured in centimeters. The value is in the original table, and opposite it is the required size.

Foreign manufacturers take the head diameter in inches as the basis for measurement. The diameter is easily determined mathematically using the formula: D=C/π , where

1. C – circumference;
2. π=3.14.

For example, the head circumference in inches is 23. To calculate the diameter, you need to divide this value by Pi. The result will be 7.32, which will correspond to the international size XXL or domestic size 59.

There are also special correspondence tables between Russian and foreign systems. Using them, you can determine your foreign size based on the Russian size, as well as the head circumference indicator. The remaining data (seating depth and distance between the temples) are necessary if the head has a non-standard size.

Determining the parameters of men's caps, baseball caps

Separately, you should consider determining the size of the cap. Most often, they are sold with a regulator, but in order to purchase a cast cap through an online store, you need to clearly define the parameters. To buy a baseball cap, you need to know the girth. We take a centimeter and apply its edge to the middle of the forehead, stepping back 3 cm from the line of the eyebrows. Then we draw it along the line of the temple, grabbing the occipital part in the area where the head is connected to the vertebral region. To purchase foreign brands, measurements from cm need to be converted to inches, and then find the corresponding data in the manufacturer’s parameter table. Do not forget that when making caps, each manufacturer uses its own sizing chart.

How to determine the size of a men's hat?

Trying on is considered the most accurate way to choose the most suitable item, but it would be a good idea to come to the store and measure the necessary parameters in advance. Thus, determining the size of a man's headdress is based on taking one single measurement - the length of the head circumference. To do this, you need to wrap a measuring tape, without pulling too much, through the protruding part of the back of the head, 1.5 cm above the ears and connect it on the forehead 2 cm above the eyebrows along the line where the edge of the product will pass.

If you don’t have tape at hand, you can use another method: take a thick thread, wrap it around your head in the same way, connect, cut and measure with a regular ruler.

The resulting result in both cases is the desired size of a men's hat . It should not be exaggerated, or understated, because hats should fit tightly enough, covering the ears without squeezing the head, slipping over the eyes, or falling off when tilted. Don’t forget that almost all men’s caps can be adjusted and adjusted to the required size, so when purchasing this summer accessory and discovering a small error in the measurements, there is no need to worry - everything can be corrected.

Let's sum it up

It is very important to understand how to determine the size of a headdress for men, because it is not always possible to try on a thing. It is worth noting that when choosing hats and baseball caps, you should take into account that they are made from different materials. For example, you can buy a knitted hat 2 sizes smaller, and a cotton baseball cap, it is better to buy a larger one (the fabric may shrink when washed).

Otherwise, the sizes of hats are determined the same way. The exception is non-standard parameters. They require 2 additional measurements. Knowing the size of your head, you can order things from famous brands without any hesitation.

Taking measurements from the head

To figure out how to determine the size of a hat for men, first of all you should take measurements from your head. You can do this quite easily yourself. For the standard measurement option, you will need a soft centimeter or just a thread, as well as a ruler or tape measure.

Measuring head circumference.

First of all, it is recommended to find a place to measure the circumference. At the front, the tape runs slightly above the eyebrows; at the back, it is important to place it along the most protruding part. The result is the final number.

The result obtained will be Russian size. In order to determine the size of a headdress from a foreign manufacturer, you should use a special table.

Features of sizing

The standard size is indicated as an integer. Moreover, during the measurement process, almost every person receives a fractional value. It will need to be rounded. How to do this correctly depends on the headgear you plan to purchase.

When it comes to knitted hats. Then you definitely need to strive for less. This is due to the fact that the threads stretch very easily, which means it will be easy to compensate for a few millimeters. In this case, the model will fit perfectly to the size of the head. If you round up, then the hat may one day become too large, and it will slide a little over your eyes.

Attention! In a situation where we are talking about Panama hats, caps, or those models that do not stretch at all, you should choose rounding up. Thanks to a small additional reserve, you can easily wear the presented headdress comfortably

Features of choice. Types of caps and their names

Hats are relevant at all times of the year. In winter they keep you warm and keep your head warm, in summer they protect from the sun and ultraviolet radiation. Every man should have a cap, the question remains: how to choose one? You need to focus on several indicators: how does it fit, does it fit the overall style or not, how much does it cost and what is it made of? You can figure out some questions on your own, but we’ll tell you what types exist and what to wear them with.

Baseball Cap

A popular accessory among modern youth. Originally created for baseball players. They could not play in sunny weather because the sun was very blinding to their eyes. New Era has created a cap with a visor to protect the eyes of athletes.

Can be worn with sports and casual clothes. It is also preferred by followers of musical styles (rap and r'n'b).

Bunnet or Flat Cap

An unusual accessory originally from Scotland. The original model is made of natural wool. At home, she is associated with the working class (farmers, workers).

A flat crown and a small visor will add originality to your look. If you want to surprise your work colleagues or close relatives, then you definitely need to wear this accessory.

Peaked cap

They began to exist in the mid-19th century. A very common men's accessory that is associated with the armed forces. It is used mainly for uniforms of various law enforcement agencies, but there are also civilian men's caps.

Well suited for military or grunge clothing styles. It will be an ideal complement to brutal style.

Coppola Cap

Famous accessory from Sicily. The beginning of production dates back to the 20th century. English nobles brought them to Sicily and popularized them there. Made from wool fabric (tweed). Now popular among all segments of the population, originally it was worn only by taxi drivers.

It looks similar to a Bunnet cap, so you can also wear it with a classic suit, plaid shirt or chinos.

There are many more different types. They are all not as popular as the ones we discussed above. Always find out their size before buying things on the Internet, and then shopping will be a joy for you.

Adidas cap size chart

Adidas is a popular sportswear brand for women and men. To choose the correct size of Adidas caps, measure your head circumference and compare the resulting value with the table.

As you can see, it's quite easy to determine the right size. All you have to do is read this article and take a few measurements.

Head measurement

It is difficult to find out the sizes of caps for men or women by measuring the girth yourself. Therefore, you must have people ready to help with measurements. To determine your baseball cap size, measure your head circumference using a flexible tape at the widest point.

Note! The girth should be measured 2 cm above the eyebrows.

If you don’t have tape at hand, you can use improvised means - for example, rope or thread. To determine the final size, you need to compare the result obtained with the data from the table.