How to remove putty from clothes: useful tips

In the course of everyday work and educational activities, there are often times when white corrector gets on a dress or trousers, or other item. Let's figure out how to remove putty from clothes so that not a trace remains of it, without damaging the fabric, what detergents and laundry powders can be used.

To understand how to wash concealer from clothes, namely how to deal with the problem in each specific case, you need to read the composition on the tube of correction fluid. Different components included in the putty require different approaches to cleaning things.

Water-based correction fluid

Stains from a water-based corrector are the easiest to remove. Soiled clothes just need to be soaked for 30 minutes in soapy cold water and then washed in the washing machine on a cycle appropriate for the type of fabric. After this procedure, there will be no trace of putty stains left, and the clothes will be clean.

If the stain is fresh, then you don’t have to soak the item, but immediately wash it by hand in running water using laundry soap and then wash it in the machine.

Alcohol based corrector

It is a little more difficult to deal with putty, the main component of which is alcohol. In this case, you need to wait until the corrector stain dries and hardens. Then carefully clean it off with a knife or nail file and wipe the stained area with alcohol using a cotton pad. After this, you will need to put the clothes in the washing machine tank and wash them on the required setting.

Ammonia is another effective substance for destroying alcohol-based putty. Alcohol is diluted in equal quantities with water and then applied to the putty stain. The product is left for a long time (45 minutes), otherwise the contamination will not be able to be removed. When the time is up, the item is placed in the washing machine and washed on the quick wash cycle.

How to clean emulsion and alcohol putty

To remove white stains, the following conditions must be met:

Putty base: it can be a solvent, emulsion, water or alcohol. Surface cleaning methods depend on it.
Next, you need to determine the type of fabric of the contaminated product. Dense materials can be treated with gasoline and kerosene, while thin materials can tear due to aggressive compounds and become unusable.
To remove old stains, you can use a soft brush, such as for brushing teeth or clothes.
You need to remember that the fresher the stains, the easier it is to remove them. Old white marks have already been absorbed into the fibers, which makes the washing process much more difficult.

Attention! Before processing the item, you need to read the information on the label: it indicates the permitted cleaning agents, temperature and washing mode.

To wash off the alcohol corrector, you need to wait until it dries. Next, take scissors, a brush or a file, and carefully remove the dirt. After cleaning, a white mark will remain - it can be wiped off with a cotton swab dipped in strong alcohol. The stain should be wiped from the edges to the center to prevent the concealer from smearing, after which the product must be washed.

Important! Perfume is not suitable for removing marks on clothing and other surfaces, since it contains aromatic oils, and they leave greasy marks. In addition, perfumes do not have cleaning properties due to the low percentage of alcohol content.

An ammonia aqueous solution is effective against alcohol putty: you need to moisten a cotton swab and treat the white mark. After a few minutes, the clothes should be rinsed and washed if necessary.

Emulsion corrector is the most difficult to remove, but it is often chosen due to its lack of odor, fire resistance and quick drying. The following products are suitable for removing putty:

kerosene;
solvents;
acetone;
petrol;
ammonia.

Before removing the putty from clothing, it is recommended to dissolve the corrector on an inconspicuous area of the fabric. This will ensure that the product will not cause harm. Before using the solution, you need to place a napkin under the surface to be treated, then moisten the cotton wool and treat the dirt from the front part. After 20 minutes, the procedure is repeated, but from the wrong side. After half an hour, the product is completely washed by hand or in a machine.

Attention! Solvents, gasoline and kerosene are classified as flammable substances and should be kept away from fire and direct sunlight. It is important to keep children away from these products to avoid accidents.

Solvent based correction fluid

The most durable and difficult to clean is putty, which is based on a solvent. However, it is quite possible to remove it if you know what to use and how to do it correctly. To do this, you will need a piece of clean cloth, a solvent (nail polish remover, white spirit) and cotton pads.

The item is turned inside out, the wrong side is placed on a clean material. Moisten a cotton pad or ball with solvent and wipe the stained part from the edge to the middle of the stain. Then we wash the item.

If the procedure is unsuccessful and the stain from the corrector remains, then only professional dry cleaning will help in this case. Do not wash when the contamination is very strong.

To remove corrector putty from clothes, it is important to remember the main rule - you cannot wash clothes in hot water, otherwise they will be damaged. When a fresh mark of putty appears on your clothes, you need to put a napkin or soft sponge on it, which will make it easier to clean the stain later. If the putty remains, it is best to use a special solution - “Antishtrich” and wash it.

What not to do

Improper use of cleaning products can result in damage to clothing. To avoid this, you should know what not to do:

Do not use chlorine bleach on colored fabrics, otherwise they will fade and lose their original appearance. It will be very difficult to get him back;
check the effect of the selected substance in an area that is not visible to the naked eye;
For delicate fabrics and silk, removing stains with alcohol-containing substances is not permissible.

It is almost impossible to remove ingrained correction fluid from a velvet jacket on your own. It’s better not to experiment if the item is expensive for you. It’s better to give it to specialist dry cleaners who know how to deal with this and how to remove putty or concealer from clothes. Read on to learn how to remove blood stains from a mattress.

Roller stroke corrector

To remove stains from the roller stroke, wash the stains in a warm aqueous solution with the addition of liquid soap for 3 minutes. If the putty is not washed off, the item must be left in this soap solution for another 45 minutes. After the procedure, clothes are washed in the machine.

A special product that you can buy at an office supply store will also help you remove the corrector from your clothes. A “thinner” is applied to the corrector putty and after a few minutes the stain disappears. However, the product cannot be used on colored or thin material, since not only the dirt will be erased, but also the fabric itself.

How to avoid damaging fabric when removing concealer stains

In order not to damage the fabric when cleaning stains, you need to follow certain rules:

Do not vigorously rub the contaminated area of clothing with a chemical agent: acetone, solvent or gasoline, as this may spoil or damage the surface of the material.
Be sure to place a piece of clean cloth under your clothes to avoid the chemical spreading over the material. The solvent will not spread beyond the stain if its edges are moistened with water.
When it was not possible to wet the putty immediately and it has dried, you should try to remove the stain, literally clean it off with a nail file before treating the fabric with the product.
Items made from delicate fabrics are cleaned from the inside out; be especially careful when using acetone or white spirit for cleaning.
Once the barcode stain is removed, you should immediately wash the solvent off the fabric so that the chemical does not remain on the clothing.
When time is short or an important event is expected, and solvent and alcohol are not available, you can remove putty from trousers or other clothing with the help of alcoholic products. The only thing is that you cannot use cognac or other dark tincture for these purposes, as stains may remain. What is needed is an alcoholic drink without color, such as vodka.
To wash concealer from black clothes, do not use very hot water when washing after removing stains. The speed of the washing machine needs to be set higher.
Freshly soiled trousers should not be rubbed dry, that is, without using water, otherwise the corrector will penetrate deep into the fibers of the material, which will subsequently complicate the cleaning task. You need to remove fresh putty by brushing it off with a napkin or cotton swab. If possible, it is better to change clothes and put the soiled clothes in a bowl of warm water.

Clothing in black colors

White concealer on black trousers is most noticeable, attracting attention and creating inconvenience to their owner. Since trousers are generally made of durable and dense material, serious chemicals are required to remove dirt from them. You can try to remove putty from trousers by following these rules:

Ammonia helps to easily remove alcohol putty. A piece of material is placed under the stain, and a cosmetic disc soaked in ammonia is applied to the stain itself for 15-20 minutes. If it was not possible to remove the contamination the first time, you need to repeat the action. Then wash the trousers as usual.
Mix ammonia with water in equal volumes. Then moisten a small cloth with this solution and place it on the stained area for about 15 minutes. Then the cloth is removed and the dirty area is lightly wiped with a brush. If the putty is not completely erased, you can repeat it again. After all the manipulations to remove the concealer stain, the trousers are sent to the wash.
An effective way to remove putty is to use purified gasoline. It is important to remember that it cannot be used on trousers if they are made of synthetics, as this may damage the product. Cleaning is carried out as follows: a sponge or cotton ball is moistened with gasoline and applied to the contaminated area of the trousers for 2-4 minutes. Then you need to rub the stain a little. It is necessary to rub from the edge of the corrector stain to its center so that the mark does not increase. Upon completion, the item is machine washed.
You can also use alcohol to get rid of correction fluid stains on clothes. A fabric folded several times is placed under the material on which the contamination is being removed to prevent printing. A cosmetic stick for cleaning ears is moistened with alcohol and the dirt is treated. When the stick becomes dirty, it must be replaced with a new one.
A very good way to combat emulsion-based putty is acetone or solvent. The sponge is moistened with the product and gently rubbed over the corrector stain. When the sponge becomes dirty, it needs to be changed. After the procedure, the trousers need to be soaked in warm water, adding powder, which has properties to remove stains, since the solvent may leave a mark.

Did the article help? Rate it

Methods for removing stains

You can simply try to wipe off fresh traces of correction fluid on clothing. An ordinary wet wipe, which is found in almost all women's handbags, is suitable for this. It is important to follow the rule: move from the edges to the central part of the spot. If you can’t find a wet wipe, you can use a paper handkerchief. When processing delicate fabrics, it is recommended to turn the product inside out before wiping off dirt from the corrector.

Water based

This putty is considered the most environmentally friendly, since water acts as a solvent. When dry, such a liquid is simply diluted with water and continues to be used for its intended purpose. It takes longer to dry, which can play into the hands of the owner of soiled clothes.

How to remove concealer from clothes if it is water-based? There are several methods for getting rid of stains:

Standard machine wash with soak. To do this, before cleaning the surface of the clothing from the streak, the item must be soaked in cold water with soap dissolved in it. For the cleanser to work, you must leave the product in the solution for half an hour. After this, the treated item must be sent to the washing machine. When choosing a washing mode, you need to start from the degree of contamination and type of fabric;
Washing with pre-treatment. You can remove concealer stains from clothes by washing the item under running water. For this type of washing you must use laundry soap.

How to clean water-based concealer if the stain is small? Just add washing powder to a bowl of hot water and wash the product.

Machine washable

Laundry soap

Washing powder

Alcohol

Alcohol correctors are characterized by fast drying and a strong odor. How to wash concealer from clothes at home if it consists of water and alcohol?

How to remove stains from concealer on clothes if it is emulsion-based? This type of contamination is the most difficult to remove. Since such corrective putties are rare, before drawing a stroke, you need to prepare everything necessary for the processing process:

Cleaning chemical;
Cotton pad or tampon;
Clean white fabric;
Napkin.

All this will allow you to complete all stages of cleaning without interruption from the process. If alcohol corrector gets on your clothes, you need to act quickly. Denatured alcohol removes putty from clothes well. To do this, you need to carry out the following manipulations:

Gauze folded in several layers or white cotton cloth should be applied to the contaminated area;
Then treat the stain on the front surface with a cotton pad soaked in alcohol;
After cleaning, the product should be rinsed thoroughly in clean water;
Then you need to hang the item out to dry naturally.

How to remove office putty? Oil or emulsion correctors can be removed with the following substances:

Kerosene;
White spirit;
Alcohol (methylated);
A solution of ammonia;
Acetone (or any nail polish remover);
A solvent used to thin paint.

Gasoline is effective, but it leaves a lingering odor on clothing that is difficult to get rid of. After treatment, you will have to wash the item several times to remove the obsessive odor. Only purified gasoline is used. It is purchased in stores, not at gas stations.

If things are contaminated with such a corrector, they cannot be washed or soaked. Instead, you need to brush off any dried residue, then apply stain remover to the underside. Before removing the stain from the stroke, it is better to place a white cloth under the surface.

Whatever solvent you choose to remove stains from concealer on clothes, you should proceed according to the following scheme:

Apply a few drops of the chemical to the contaminated area and distribute it using a cotton swab;
Record the time and start processing after 15 minutes;
Then moisten a cotton pad in the liquid and clean the stain with gentle movements from the edges to the center;
After this, blot the stain with a paper towel or napkin and put the item in the washing machine.

Before using any cleaning product, you should test it on the fabric. To do this, just apply a small amount to the seam or other inconspicuous part of the product.

Alcohol corrector is quite difficult to clean. Before you wash the putty off your clothes, it is best to let it dry and then try to remove it with a brush. If all the stain is not gone, you can try to wash off the putty using a swab dipped in cosmetic tonic, cologne or vodka. The cleaned item should be washed in the machine to consolidate the result.

Acetone

Solvent

Kerosene

Ammonia

White Spirit

Solvent based

Solvent-based correctors are usually available in the form of pencils or original pens. Due to their unique composition, they can be applied as accurately and subtly as possible.

Before removing a concealer stain from clothing, you need to select a product and test it on an inconspicuous area of clothing. Next, you should step by step remove the annoying stain:

First, it is important to decide on the substance used:
If the fabric is thick, kerosene or refined gasoline can be used;
It is better not to process thin fabrics yourself.
If the stain appeared a long time ago, clean the corrector using an old toothbrush or soft clothing brush. In many cases, most of the stain is removed;
The product must be turned inside out and a cloth placed under the contaminated area;
Then soak a cotton swab or disk in the cleaner. If there are only small splashes of putty on the fabric, it is enough to take a cotton swab and use it to carefully treat the barely noticeable traces of the splashes;
After the most contaminated area has been cleaned, the item should be washed in soapy water or using high-quality powder.

Barcode corrector

A separate group of dry corrector are roller putties. They are a twisted tape placed in a plastic case. It is applied by pressing the roller on the paper. The chemical composition provides good coverage. However, if you handle the stationery with care, you can stick the tape onto your clothing. In this case, the problem arises: how to wash the stuck strip of white frozen liquid. Solid corrector can be easily removed:

Soak the item in soapy water for 40-60 minutes. When soaking, the water should be cool;
Then carefully remove the streak from the clothing. If it is removed with tape, it will be enough to wash the product in the machine on a delicate cycle and forget about the problem.

A particularly serious problem is ingrained concealer. It is difficult to remove. And the above methods may be completely ineffective. In these cases, it is worth using special methods to treat difficult stains.

Application of nail file:

Before removing the concealer stain, the product must be laid out on a hard surface;
Place a piece of cloth under it that will absorb excess moisture and prevent the area of contamination from expanding;
Soak a cotton pad in an alcohol-containing substance and wipe the stain with it;
The resulting stains can be removed by washing. For it you need to choose a liquid powder combined with conditioner;
The item itself should be dried in a ventilated area. It is not recommended to use heating devices for drying, as the smell will persist and the quality of the fabric may be damaged.

Chemical treatment. If you need to remove a more stubborn putty stain, you will need chemicals. The following cleaning agents are suitable as cleaning agents:

A solution of ammonia;
Solvent;
Nail polish remover;
Acetone.

To remove the putty, it is enough to saturate only the top layer of the fabric. More thorough smearing leads to deeper damage to the product. The cleanser itself must be washed off in time with clean water.

Use of specialized tools. If standard recipes for removing concealer from clothes do not help, in some cases it is possible to use specialized stain removers. However, after using them, you must wash the item quickly and thoroughly. Since manufacturers offer a wide range of different products, it is necessary to select it for each case, taking into account the possibility of using the cleaner on a particular fabric.