Two competitors mattresses Ascona or Ormatek, which is better to choose

Mattresses Askona

The company has been producing mattresses for 25 years. The assortment is varied. Among the models you can find roller models, elite ones, which will be based on independent spring blocks that perfectly support the spine. Double-sided models deserve special attention. Thus, Askona orthopedic mattresses are available to buyers with any budget and income level. The factory holds regular promotions and provides discounts on some product models. In the manufacture of structures, both synthetic and natural materials are used.

Fillers

The high quality of Ascona products is due to the use of only high-quality fillers. The main one is polyurethane foam. The material is elastic, often combined with coconut coir, which gives the product the necessary rigidity. The maximum permissible weight of a person, based on a sleeping place, is 90 kg. Most models are classified as springless, which allows you to save on subsequent transportation of the purchased mattress. After opening, the model will level out over some time. Materials such as merino wool, felt, coconut board, latex and some other foam materials are also used.

Advantages

Askona mattresses have the following advantages:

1. The height of the products is 12-14 cm, which allows the mattresses to be rolled into a roll if necessary for long-term storage or transportation.
2. Prevent curvature and deformation of the spine.
3. During rest, maintain the spine in the correct position.
4. Excellent orthopedic properties, which eliminates the unpleasant consequences of overstrain in the back area.

If we compare Askona and Ormatec, the first manufacturer is able to compete due to the affordable cost of its products. So, the cost of a good product will be 5,000 - 20,000 rubles. Savings here are unacceptable, because the result will be poor health and problems associated with the functioning of the musculoskeletal system.

Popular models

The best Ormatek mattresses with a dependent spring block

Mattresses of this type have a block of springs that are interconnected and attached to a metal base. They depend on each other, since when one is acted upon, the other springs are affected. Today, the orthopedic properties of such mattresses are considered lower than those of springless or models with an independent block. But their main advantage over others is their low cost, which is why they do not lose their popularity and are used not only as a cheap option for summer cottages, but also as the main sleeping place.

Ormatek Kleran Bonnell

Rating: 4.9

The first place in this rating category goes to a mattress with high rigidity and combined filling, which will create optimal comfort during rest. The size range is quite wide, the height of the model is 19 cm, the optimal load for 1 seat is 105 kg.

The composition includes a block of dependent Bonnell springs, coconut coir, thermal felt, modified foam, and polyurethane foam is laid around the perimeter. The cover is made of synthetic jacquard with padding polyester quilting.

Users noted that the mattress has all the necessary performance characteristics for its price. It does not deform for a long time, the springs do not creak. If the weight restrictions are met, the model will last for quite a long time.

Advantages

• good combination of fillers;
• cleans well;
• allows air to pass through;
• safe composition;
• variety of sizes;

Flaws

• not detected.

Ormatek Optima Light Bonnell

Rating: 4.8

A mattress with medium hardness will create the necessary comfort during sleep, promote relaxation and quickly relieve fatigue. The height of the model is 20 cm. The permissible body weight per sleeping place is 110 kg with a weight difference of up to 20 kg. The classic model with a Bonnell spring block contains a layer of Ormafoam artificial material.

It is characterized by high elasticity and elasticity, is environmentally friendly, does not cause allergic irritations, and has a massage effect. The material is resistant to mold and fungi, prevents the growth of bacteria, maintains optimal temperature and humidity, thereby creating a normal microclimate in the sleeping area.

The covers are available in two versions. This is either cotton jacquard or knitwear, which is filled with hypoallergenic fiber and creates voluminous patterns.

Advantages

• optimal orthopedic effect;
• does not form mold, does not rot;
• high breathability;
• safe filler;

Flaws

• not detected.

Ormatek mattresses

Ormatek or Askona - Russian buyers who decide to upgrade their sleeping place most often choose between these manufacturers. Ormatek has been on the market for 15 years and has in its assortment over 200 models of mattresses, which, for ease of study, have been divided into 10 separate lines. "Premium" has the highest comfort levels among other lines.

To manufacture super-class products, only natural materials are used, which are reflected in the final cost of the products. “Season” belongs to the category of double-sided structures, where each side has different rigidity indicators.

The “Dream” line contains classic models, for the manufacture of which natural fillers and raw materials were used. For people in the large weight category, Ormatek has released a separate “Strong” line. “Duet” is popular among married couples whose weight varies significantly. Springless “Orma” models consist of coconut coir. Flex models are considered more flexible. “Mono” consists of one-sided models, like the “Kids” line of hard mattresses for children. The Ormatek company produces a line of budget models of acceptable quality called “Optima”. The company's main competitor is the manufacturer Ascona.

Advantages

The advantages of Ormatek mattresses include:

1. Reasonable prices for popular models. If you compare prices with other manufacturers, the company can be classified as affordable. This is why they are so popular. Regular discounts and promotions only fuel the interest of potential buyers.
2. During the production process, only environmentally friendly and safe components are used.
3. Using the latest technologies.
4. High quality of finished products. At each stage of production, the product undergoes quality control.
5. Wide range of models.

Spring products

Contrary to popular belief, spring products can provide high-quality and deep sleep, guaranteeing the necessary support for the spine. The models are based on spring blocks, the positive characteristics of which will determine the quality of the future product. The technology used for making blocks varies. The spring blocks used have the following main differences:

• thickness of the elements used;
• number of springs;
• diameter.

The products are characterized by excellent breathability.

Springless mattresses

Instead of springs, stacked or monolithic blocks are used, which include both artificial and natural materials. Among them:

• foam;
• latex;
• coconut coir.

With the help of high-quality fillers, it is possible to perfectly maintain the spine in the correct position during rest.

In the domestic market of mattress manufacturers, two leaders stand out - the Ormatek and Askona companies. It is often difficult for buyers to make a choice: brand products are not inferior to each other in quality. And yet, let’s try to figure it out and answer the question: “Ormatek” or “Ascona” - which is better?

"Ascona" and "Ormatek": about the companies (data for 2021)

Let's start with the history of the key players in the Russian furniture market. for 19 years, the factory produces 3 thousand mattresses and 23 thousand pieces of furniture every day. The company's products are sold in more than 600 showrooms in 15 countries. Five thousand people work here. More than eight million customers have already chosen Ormatek mattresses and sleep comfortably on them. Prices for brand products start from 3.5 thousand rubles.

Askona was founded even earlier - in 1990. Today the company produces 9 thousand mattresses, 1 thousand pillows, 900 beds and sofas every day, and the total area of ​​production facilities in Russia exceeds 40,000 square meters. The factory's production is located in two cities: Kovrov (Vladimir region) and Novosibirsk. Mattresses manufactured by Askona cost from 3 thousand rubles and every third resident of Russia sleeps on them. Great result, isn't it?!

Both companies have a wide range of both springless mattresses with fillings from coconut coir to natural latex, and spring mattresses (with independent spring blocks and “Bonnel”). Here you will find products for every taste and budget. "Ormatek" and "Ascona" offer their customers mattresses of all degrees of hardness: from the hardest to very soft models.

Among the assortment of brands, customers with spinal diseases, overweight, professional athletes, simply active people who care about their sleep, and other demanding categories of customers will be able to choose an orthopedic mattress.

Both companies produce lines of mattresses for children from 0 years old, and among the products of Askona and Ormatek you will find specialized children's mattresses for each age. The company pays great attention to the production of eco-mattresses; they will be able to satisfy the needs of the most demanding client who cares about the environment and their health.

Spring mattresses "Ormatek" or "Ascona". What's better?

You need to choose a mattress based only on your needs. This is the case when reviews from friends will not help. Each person has his own preferences, his own body structure. Therefore, what suits one person will not necessarily suit another. In order not to get confused in all the variety of mattress models, we will divide them into two main groups: spring and springless. And first, let's try to compare the Askona and Ormatek mattresses with spring blocks.

Mattresses with spring blocks come in several types:

With Bonnell spring block. In this design, the springs are intertwined with each other in a certain order and form a single block. Such mattresses have maximum elasticity, they are durable, and cost much less than products with independent blocks. The quality and cost of mattresses with a Bonnel block is determined by the number of springs per square meter. The more there are, the more elastic and expensive the product. The main disadvantage of the mattress is that over time, the so-called hammock effect may appear. “Ascona” and “Ormatek” add additional comfortable layers to the bonnel: artificial latex, polyurethane foam (PPU) of different densities and coconut - all to ensure that even an inexpensive mattress lasts as long as possible.

Mattresses with independent spring blocks are more popular today. They consist of many individual blocks with springs of different shapes (one of the most common is the barrel shape). Such mattresses are more expensive, but provide better support for the spine and have an orthopedic effect. The body recovers faster during sleep. Mattresses with a spring block are quite durable, do not emit extraneous sounds, absorb weight well, and do not deform locally.

Askona mattresses use a special type of spring, patented. Their unique structure makes it possible to adapt to a person depending on his build and weight. The spring consists of narrow and wide parts and is compressed in several stages: the wide part - under small loads, the narrow part - under large loads. In this case, the spring remains in a vertical position. Thus, the mattress essentially has several different degrees of firmness to best suit each sleeper and meet individual requirements. Ascona has its own spring production; it produces twisted spring blocks, which allows optimizing their transportation and storage. Most recently, the company has developed and introduced into production new models of spring blocks for Mediflex mattresses (including minibonnel and minipocket).

Ormatek uses springs from the Japanese Matsushita line for its mattresses. And also a block of independent 4D Matrix springs developed by the company’s experts. The springs in it fit as closely as possible to each other according to the principle of a honeycomb. Thanks to this, the number of springs per square meter of sleeping space increases, and the number of voids is reduced to a minimum. In addition, the springs are connected to each other in the central part, and the edges remain free, which gives the spring blocks autonomy. A mattress with 4D Matrix relieves muscle tension and supports the spine in the correct position during sleep.

Both companies offer customers mattresses with five- and seven-zone spring blocks. The designs provide the greatest orthopedic effect, support the spine and take into account the anatomical characteristics of the person. Both companies also offer mattresses for couples, consisting of two halves with different degrees of hardness.

Both Askona and Ormatek use modern high-quality materials in the production of spring mattresses. For one sleeping place, the products can withstand a load of 140+ kilograms and at the same time perform orthopedic functions.

Springless mattresses. Which is better: “Ascona” or “Ormatek”

The range of springless mattresses from manufacturers is no less wide. Let's try to find the fundamental difference between the Ascona and Ormatek springless mattresses.

Companies offer a wide range of popular, popular fillers: natural coconut fiber, bicoconut, polyurethane foam, artificial and natural latex, Holcon, holofiber, struttofiber and struttoplast, etc. Typically, for the production of such fillers, identical high-quality components are used that meet all modern requirements and meet quality standards .

Unique components are also used as fillers:

• Memory Foam or memoryx is an artificial filler made from modified polyurethane with low elasticity. Memory Foam has a “memory effect”. The material adapts to the human body and takes its anatomical shape. Sleeping on a memory foam mattress is very comfortable, like sleeping on a cloud. Memorix provides maximum relaxation to muscles tired during the day, prevents numbness of the limbs and normalizes blood circulation. The thicker the filler layer, the stronger the “immersion”. The filler is ideal for older people.

• Cooling gel Memory Gel not only has a “memory effect”, but also removes excess heat that a person generates during sleep. With this filler you are provided with the most comfortable temperature conditions.
• Relax Foam cellular foam made from polyurethane foam has a special structure that gives the filler orthopedic properties. The foam allows air and moisture to pass through well, allowing the sleeper’s body to “breathe.” In addition, the filler has a micromassage effect and normalizes blood circulation in the muscles.

By the way, both Askona and Ormatek have a CertiPUR certificate. The document confirms compliance with safety standards for human health and the environment during the production and use of polyurethane foam. Polyurethane foam is used by manufacturers as a filler for mattresses and in other segments of the furniture industry.

The CertiPUR standard is international, it was developed by the Association of Manufacturers of Elastic Polyurethane Foam Blocks (EUROPUR). The Association includes 25 countries, including Russia. The products of a company that has such a certificate are marked with a special CertiPUR mark.

"Ascona" or "Ormatek": comparison of mattresses

Products manufactured by Askona and Ormateka meet the following criteria:

• Quality,
• Safety,
• A wide range of,
• Durability.

When choosing a mattress, decide on its characteristics, taking into account your own preferences, weight, age, state of health, and you will definitely find a suitable model from each manufacturer.

Which mattresses are better: “Ormatek” or “Ascona”. Reviews.

Millions of people in different countries of the world sleep on mattresses of the Askona and Ormatek brands. The companies have built up a huge customer base; customers know what to expect from the products of our manufacturers, and return to the showrooms of these companies time after time. Quality can be judged by sales volumes, which are growing every year. Positive reviews about Ormatek and Askona mattresses from customers also indicate the highest quality of the products.

Reviews from customers of the Anatomy of Sleep online store about mattresses from the Ormatek factory:

Reviews from customers of the Anatomy of Sleep online store about mattresses from the Askona factory:

Having studied customer reviews on the company’s websites and in search engines, we can conclude that the quality of the products of both companies is at a high level, and every year the bar only rises. Another confirmation of the high quality of Ascona and Ormateka mattresses is their recognition at the international level. Companies have been exporting mattresses to many European countries for a long time: Poland, the Czech Republic, Finland, Sweden, Serbia, Ukraine, Belarus, etc. Foreign mattress companies trust Russian production. "Ascona" produces mattresses of the American brands King Koil and Serta at its own facilities, and "Ormatek" produces Danish mattresses Tempur.

All these mattresses: both foreign and domestic brands are present on our website. You can select and purchase them ONLINE.

Raw materials

It is impossible to answer the question which mattresses are better than Ormatek or Askona. When compared, in each specific case a certain model will win. Promotions and discounts provided by manufacturers and suppliers can also play a key role in choosing a particular model. However, an important aspect of any choice will be the filler and the raw materials used in the manufacture of the product. Popular:

1. Coconut coir. A completely natural material that gives the product rigidity.
2. Polyurethane foam. An artificial material that serves as a soft layer.
3. Latex. Natural material with a cellular structure. Used to create an optimal microclimate. The density will depend on the number of perforations.
4. Thermal felt. Material created on the basis of synthetic fibers, wool and cotton. Used to create an insulating layer.
5. The felt is soft. A natural material characterized by flexibility, softness and high strength.
6. Wool. A natural material that can store heat and create an optimal microclimate (winter-summer).
7. Cotton. A natural material characterized by excellent hygroscopicity and ventilation. Used to create a “summer” cover in a winter-summer design.
8. Jacquard. High density is achieved by using unequal pitches in the weaving process of the material. The composition includes polyester, polypropylene and cotton.
9. Stretch. Knitted fabric. The material is capable of stretching, which leads to changes in size and shape.
10. Abaca fiber. Natural bulk material made from the stems and leaves of the banana palm tree. It is characterized as a durable and elastic material.

Askona or Ormatek mattresses, which is better: comparative analysis

Sleep products from these manufacturers have taken leading positions in the modern market.

Judging by the reviews of many consumers, during operation this type of product showed its best performance. However, the variety of Askona and Ormatek mattresses does not allow buyers to quickly choose the right model. The selection of a base for a bed should first of all be based on your preferences and requirements for quality, material, degree of rigidity, comfort and other parameters. Reviews of Ormatek and Askona mattresses will also provide significant assistance in this matter.

It is difficult to compare the cost of sleep products, since there are no identical models in the product range.

According to reviews from customers deciding which mattress is better, Ormatek models are softer, despite the identical characteristics of competitor products.

If you dream of a healthy and pleasant night's rest that will restore strength, restore a cheerful state and a joyful mood, then before purchasing a sleep product you should study the reviews regarding which mattresses are better.

See also:

Which mattress to choose soft or hardWhich mattress to choose spring or springlessWhich is better Ormatek or Ascona

Features of Ascona mattresses

Askona or Ormatek, which is better? To get the answer, you should study the features of the model range of both manufacturers. The first one to take for comparison is Ascona, because the manufacturer has been on the market for 25 years, while Ormatek is only 15 years old. The brand's assortment includes products designed for different budgets. Regular discounts and promotional offers will help you purchase a more expensive product at an affordable price.

Design options also vary. Thus, in the model range you can find designs equipped with independent spring blocks and roll-type models. The second brand specializes in high-quality double-sided models. Both artificial and natural materials are used in the manufacture of products. Among them:

• BambooFlex foam;
• foam filler MediFoam;
• Orto Foam filler;
• Oxy Comfort foam;
• terry cloth;
• jacquard;
• velours;
• merino wool;
• knitwear;
• linen;
• holofiber;
• felt;
• latex;
• coconut slab;
• sisal.

Tips for choosing

The official website of Ormatek offers 11 series of mattresses - this includes both spring and springless models. Main lines:

• Easy Line - budget mattresses with an independent spring block that creates 7-zone body support, and sides of different hardness. An excellent option for a summer house, as well as an additional sleeping place or a temporary solution.
• Comfort - the design of these models adapts to the anatomical features of any person and provides good support for the spine. Because of this, the mattresses in the series are also suitable for people with back pain.
• Optima - products with anatomical effect, made from hypoallergenic and high-quality natural materials.
• Tatami are high-end models that will ensure deep and healthy sleep. The mattresses are made using breathable and environmentally friendly materials. The knitted cover of the products in this series resembles a cut of wood in texture and pattern.
• Orto Premium are expensive and very comfortable single-sided mattresses of approximately the same cost, despite different hardness. Equipped with a proprietary 4D Matrix spring block and can withstand heavy loads.
• Ocean - have a memory foam filler, which also creates excellent thermoregulation. Suitable for those who like to sleep on a cool surface.
• Kids is a series of children's mattresses that includes both spring and springless products. They have the necessary rigidity for a child and high-quality covers.

Features of Ormatek mattresses

The company has over 200 models in its assortment, and it will take a lot of time to compare each one. The products are based on bi-coconut and coconut coir, merino wool, carpet, spunbond, thermal felt, bulk felt, natural wool, Hollocon, Ormafoam and Memorix foam, horsehair, latex. Having entered the market later, the manufacturer is in no way inferior to its competitors, and in many ways even ahead of its rivals.

Comparing Ormatek and Askona

Everything is subject to comparison, and before purchasing a quality mattress, it would be a good idea to compare the two most popular brands of sleeping products in Russia. Ascona provides a large selection of sizes. Parameters for comparison:

Materials

The difference is that Askona does not use horsehair in production. Otherwise, the fillers used are identical, but the names may differ slightly. Materials:

• wool fiber;
• holofiber;
• cotton;
• jacquard;
• knitwear;
• spunbond;
• padding polyester;
• "bonnel";
• polylock;
• polyurethane foam;
• latex;
• horsehair;
• coconut coir;
• felt;
• viscose jacquard;
• batting;
• calico

Patented springs

Each manufacturer has patented and uses its own spring block designs. Ascona has Hour Glass. In this case, the spring blocks will have an hourglass shape. Each element is placed in a separate case. Regardless of the degree of load, the spring compression is vertical.

Ormatek uses reinforced spring blocks made in Russia. This made it possible to increase the service life of the products and influenced the maximum load on the product’s sleeping area. The name of the technology is Titan, and is part of the Life line.

Certificates

CertiPUR is typical for both manufacturers, which indicates the safety of the designs used by the buyer.

Guarantees

The service life of the Askona product will be 25 years, when using a special cover - 35 years. Ormatek has established a warranty period of 10 years, and carries out minor repairs during the first 2 years. These terms are conditional, since the company’s websites indicate other terms for using its own products.

Price

Ormatek provides more budget models; Askona gives preference to high-quality materials, which are reflected in the final cost of the product. As an experiment, we compare several models from both manufacturers that would meet the specified parameters:

• load indicator 140 kg;
• the presence of an independent spring block;
• latex;
• the hardness index is average;
• product size 160x200 cm.

A seven-zone product from the manufacturer Askona will cost the consumer 57,000 rubles. (“Advance”). A similar model can be found in the Ormatek lineup and costs 63,000 rubles. (“Dream Max 4D Matrix”). When choosing Askona, an additional 15-25% discount is provided. Ormatek provides a model with a thickness of 22 cm (natural latex), a competitor has reduced this figure to 18 cm (artificial latex).

How to choose a quality mattress

Depending on the type of construction, mattresses for beds are classified into springless, with an independent and dependent spring block. The latter are considered the cheapest, but less safe for health. The second type of product attracts buyers with the correct distribution of the load on the spine, which eliminates the development of its curvature. Ormatek springless mattresses consist of several layers made of materials of different densities. This combination allows everyone to choose a product with the optimal degree of rigidity and elasticity. When purchasing a bed element, experts recommend taking into account the following product characteristics:

1. Size

   . Depends on the size of your bed (single, double, one-and-a-half, children's, king-size).

2. Type of filler

   . The best natural materials are coconut coir, latex, horsehair, and bamboo fiber. Artificial fillers are various types of orthopedic foam, highly elastic polyurethane foam, which is an analogue of natural latex, holkon, struttofiber. The former are considered more expensive and durable. Artificial materials are characterized by hypoallergenicity and bactericidal properties.

3. Rigidity

   . Ormatek children's mattresses should have the highest rate, which will contribute to the proper development of the spine. The degree of rigidity is selected taking into account the age of the user. The older it is, the softer the product you need to choose. Don't forget about your health. If there are pathologies associated with the musculoskeletal system, it is recommended to check the correct rigidity of the bed element with the attending physician.

4. Weight per berth

   . Selected taking into account the user's body weight. The more a person weighs, the higher the load on the sleeping place should be.

5. Number of springs

   . The degree of orthopedic effect, sleep comfort, and the level of load that the product can withstand depend on this characteristic. The optimal value should be at least 700 springs. For TFK blocks it is permissible to reduce it to 500 elements.

6. Type of external upholstery.

   The cheapest options are polyester or jacquard. Synthetic materials are resistant to mechanical stress, but do not allow air to pass through well. Experts recommend choosing upholstery made from knitwear (cotton, linen or wool combined with polyester). Such fabrics are more elastic, breathe well, but require additional protection from dirt and have less mechanical strength.

7. Availability of handles.

   This element makes it easy to turn over and move.

8. Functional features and equipment

   . There are mattresses of varying degrees of hardness, with 3.5 or 7 zones, each of which provides support for a specific area of ​​the spine. Some models are impregnated with anti-allergenic or antistatic compounds. The kit may include covers or mattress covers with memory effect, “winter/summer”. In addition, they protect the product from contamination, cuts, puffs, and leaks.

   Read also:  We wash the bath curtain from stains of rust, yellowness, mold, mildew, and limescale
9. Price.

   Depends on the characteristics of the product, the Buyer chooses an option taking into account his financial capabilities and preferences.