How to clean faux fur at home: effective methods and recommendations

Features of cleaning faux fur

This material is so popular and in demand because its appearance is in no way inferior to natural fur. It is made to look like a fox, rabbit or raccoon, but it is more affordable and does not require the destruction of animals. In order for things to retain their attractiveness for a long time, you need to provide them with proper care, so it is important to know how to clean faux fur at home.

It is worth remembering that you cannot use acetone or vinegar for cleaning. It is best to use potato starch, soda, and gasoline for this. However, you must first test the product on a hidden part of the fur so as not to disturb its color.

You can clean faux fur at home quickly and easily, as it is much easier to clean than natural material. In addition, it is important to store such products correctly, because synthetic materials attract moths. Therefore, to keep the item attractive, it should hang in the closet, packed in a special case.

If stored improperly, white fur can turn yellow, and removing the yellowness is not so easy. It is worth remembering that products made from this material can even be washed if the dirt is very strong.

Precautionary measures

• Before starting the cleaning process of a fur product, test the detergent in an inconspicuous place to see the reaction of the lint to the substance. If the color remains the same, the shine has not disappeared and the pile has not stuck together, you can treat the entire fluffy surface in this way.
• Wear rubber gloves when cleaning faux fur. If you use ammonia or gasoline, open the windows and turn on the ventilation.
• Do not process clothing near open flames.
• After cleaning, ventilate the room.
• Dry the product in a non-living area.

If you follow all the recommendations and adhere to the recipe, your favorite fur item will serve you for many years.

How to Clean White Fur

Many people are interested in how to quickly clean white fur at home in order to eliminate dirt and yellowness. If the label indicates that the product can be washed, then the item must be washed by hand at a temperature of approximately 40 degrees. It is worth remembering that if the product is heavily soiled, it is best to go to dry cleaning, as the fur can be damaged.

You can clean faux white fur at home with starch. To do this, mix starch with water until a paste forms. Apply the resulting mixture to the yellowed areas and leave for a couple of hours. Then carefully brush and dry the product in the fresh air. Even with the most severe contamination, it is best not to completely wet the fur product, but only treat the most contaminated areas with a soap solution.

Preparing for cleaning

We clean fur at home quickly and carefully, since the appearance of the product will largely depend on this. Properly carried out, high-quality cleaning of fur begins with its preparation. The fur product is carefully inspected beforehand to ensure there is no tangles or tangles.

Cuffs and collars are inspected separately. Detected defects are smoothed out carefully with a brush. Then you need to shake the product well to remove excess dust and hang it on a hanger to smooth it out, and then just start cleaning.

Cleaning fur on a jacket

It is very important for everyone to know how to properly clean faux fur on clothes, since using simple methods you can return it to its former attractive appearance without resorting to the services of specialists. You can try a solution made from lemon juice or citric acid.

To do this, you need to dilute lemon juice with water in equal proportions, moisten a sponge in the resulting solution and clean the fur strictly in the direction of the pile. Hang the product on a hanger to dry. After complete drying, you need to comb the fur with a sparse comb.

Lemon juice should be used very carefully as it may slightly change the color of the fur. That is why you initially need to experiment in an inconspicuous area.

Features when removing different types of stains

Stains are removed locally. The choice of product depends on the nature of the contamination:

1. The grease will remove the dish gel.
2. Gray marks and blood stains can be removed with baking soda diluted with cold water.
3. Complex stains of unknown origin can be removed by a mixture of starch, dish gel and washing powder in equal proportions.
4. Oil paint will be dissolved by vegetable oil, and the residue will be collected by a soapy sponge.
5. Shampoo will dissolve traces of lipstick.
6. Vodka can remove foundation stains on the hood.

The selected product is applied to the dirty area and left for 10–15 minutes. After treating the stains, the product is wiped with a damp sponge, shaken and hung out to dry. Afterwards it is combed with a fine-toothed comb.

Cleaning fur on boots

If dirt has formed on your boots, then you should definitely use practical tips on how to clean faux fur on shoes. To do this, you need to use products that will remove dirt without changing the color of the product. An effective remedy is baking soda, which is rubbed into contaminated areas with your hands until it changes color to gray. Thanks to this product, you can quickly and effectively deal with dust and dried dirt. Remaining soda can be removed by shaking the boots several times.

In addition to soda, you can also use flour, talc or potato starch, which are also rubbed into the fur edge of the boots, and then shake them thoroughly.

Cleaning the fur on the collar

The collar is distinguished by its vulnerability and the fact that dirt most often forms on it, as it comes into contact with skin, hair and cosmetics. Cleaning it is quite complicated and time-consuming, so you definitely need to know how and with what to clean faux fur at home. In this case, gasoline or a mixture of salt, alcohol and water are considered effective. You need to take all the components in a ratio of 3:1:50, mix thoroughly and apply to the fur collar with a sponge, then blot with a cloth and knock out.

Strong, persistent stains are very easy to remove with bran. To do this, you need to warm them up a little, stirring constantly so that they do not burn. Place the product with a fur collar on the table, sprinkle the dirt with bran and rub strictly in the direction of the pile, and then back. After this, beat the fur well, and it will become clean and fresh.

These methods should absolutely not be used

There are some methods for cleaning fur items, offered on the Internet by many sites, but their benefits are unlikely, the components are questionable, but correcting the situation to which these methods can lead will be problematic, if not impossible.

So, the components in these methods are:

• petrol. This substance can not only spoil the fur coat externally, but leave a stable and long-term specific odor on it;
• starch. Like other fine-grained bulk substances, if they are rubbed into the fur, they are practically not completely combed out;
• Sawdust. In the case of fur, their absorbent properties are very doubtful, but the problematic removal of their residues (dust) from the pile is exactly what awaits those who decide to try this method;
• ammonia. You can find recommendations on many resources for cleaning fur with this alcohol and salt. As in the case of gasoline, it will leave an unpleasant odor and, in addition, will make the fur tough;
• semolina and flour. By analogy with starch;
• lemon juice. Faux fur is intolerant to various acids, which include lemon juice. Its use can cause both discoloration and dryness of the pile;
• wheat bran. As with sawdust, the bran will become embedded in the undercoat and fur and will be very difficult to remove, plus it will leave a dirty color on light-colored fur.

Removing stains

Many people are interested in how to clean fur at home. You can remove grease stains on white faux fur using gasoline and starch mixed in equal proportions. To do this, the resulting mixture is rubbed into the contaminated area, and after it has completely dried, the product is simply removed with a brush. Since gasoline is a fairly aggressive substance, you initially need to treat a small area on the wrong side of the product with it and check the reaction of the material.

In addition, to remove stains, you can mix starch and any dishwashing detergent in equal proportions, apply the resulting slurry to the dirty area and leave until completely dry, and then brush well with a brush.

You can get rid of stubborn stains using any product used to clean carpets and furniture. To do this, you need to dilute it according to the instructions and thoroughly treat the stain, and then wipe with a slightly damp sponge to wash off any remaining product.

There are a variety of ways to clean faux fur, one of which is to use sawdust. To do this, spread a sheet on a horizontal surface, moisten it a little and place the fur product so that the pile is on the bottom. Use a carpet beater to knock out the dust well. Then hang the product on hangers and sprinkle with sawdust. After a couple of hours, clean them thoroughly with a clothes brush.

Heated sand works well for cleaning fur. Lay the fur item on a perfectly flat, hard surface, pour in hot sand and rub it into the fur. Simply shake off the remaining sand. The procedure must be repeated until it becomes perfectly clean.

It is important to know how to clean fur at home. Dishwashing detergents or just shampoo can thoroughly clean fur products. Initially, you need to dissolve it in warm water and beat the foam well, which is applied to the fur, rub it into the pile and leave for about 15-20 minutes. Then rinse thoroughly with shampoo.

How to bleach natural fur?

The fur has been cleaned, but the yellowness remains? Despite the fact that this is a natural process for white pile, you can still slow it down a little. To do this, first of all, the product must be stored correctly, cleaned regularly and worn according to the weather.

To remove yellowness, prepare the following solution:

1. A small amount of water is mixed with half a bottle of hydrogen peroxide.
2. The liquid is poured into a spray bottle and the product is sprayed with it.
3. After applying the bleach solution, the product is hung to dry.
4. Then they comb it thoroughly and put it in the closet.

This method can be used to clean both natural and faux fur.

Hydrogen peroxide is also mixed with talc or starch until a homogeneous mass is formed. The resulting mixture is applied to the fur and distributed evenly throughout the product. Once the mixture has dried, it is brushed off with a special fur brush.

Treatment with hydrogen peroxide allows you to lighten the product by several tones, removing the unpleasant yellow tint. At the same time, it is suitable for cleaning both fur and light sheepskin coats.

Removing yellowness

You need to know not only how to clean faux fur at home, but also how to remove the resulting yellowness. Blueing will help restore the original whiteness of a fur product. You need to dilute it in water until it turns pale blue, wipe the inside of the fur product to check the reaction to this product.

Then moisten the foam sponge in the blue solution, squeeze out a little and wipe the fur item well. Leave until completely dry.

Ordinary hydrogen peroxide will help renew white fur. To prepare this solution you need to dilute 1 tbsp. l. peroxide in 0.5 liters of water. Stir this mixture well, and then carefully treat the surface of the fur product, hang it on hangers and leave it in a sunny place until completely dry. Then comb the pile thoroughly with a brush.

You can get rid of any type of dirt and yellow spots formed over time using semolina. To do this, you need to lay out the clothes on a flat surface and sprinkle them well with semolina, and then thoroughly rub it into the fibers. To remove grain residues, you need to thoroughly vacuum the product.

Easy cleaning

If a dust deposit has formed on the product, it can be removed by knocking it out. This method is suitable not only for fur coats, but also for hats, collars and shoes. Here's how it's done:

1. Place the item with fur on a damp cotton cloth so that the lint is at the bottom.
2. Use a beater to remove dust by lightly patting it.
3. Smooth out the product and dry it.

If this method does not help, you should clean the item with soapy water. The procedure is as follows:

1. Hang your clothes vertically on a hanger.
2. Pour shampoo dissolved in warm water in a proportion of 3 tbsp into a large container. l. per liter, stir until foam appears.
3. Apply this foam to the fur with a brush, avoiding the fabric base.
4. If the length of the pile is less than 2 cm, you need to brush it from the end to the base of the hair, if longer, in the opposite direction.
5. Remove any remaining foam with a cotton cloth or wet wipes.
6. Dry the fur with a towel that absorbs water well, then dry it outside or in a ventilated room.
7. When the product becomes dry, comb it with a wide-toothed comb, preferably a metal one. This is necessary so that the pile does not fluff, does not stick together and looks beautiful.

Attention! You cannot dry fur, both natural and artificial, in the sun, near a fire, or near heating devices. It is also not worth speeding up the process in various ways: the clothes may change color or become deformed.

To make the faux fur shiny after cleaning, you should make a mixture of 0.5 liters of alcohol, 0.5 liters of water and 1 tsp. glycerin. The resulting product must be carefully applied with a cotton swab or a spray bottle, then the pile is dried and combed again.

Basic cleaning rules

In order not to spoil your favorite item, you definitely need to know how to clean faux fur at home, and also take into account certain rules for this procedure. You need to dry things made from this material naturally; you cannot use a hair dryer, radiator or iron.

To give the product additional shine after cleaning fur products, you need to use acetic acid. Thanks to this, the pile will become smooth. If concentrated or hazardous products are used for cleaning, then safety rules must be followed.

Dry cleaning

There are times when improvised means are not enough. If the dirt cannot be removed by home methods, you should use dry cleaning services. Professionals will be able to thoroughly clean the product and restore it to its original beauty and shine. Whether it is possible to clean clothes with chemicals is another question. Typically, information about acceptable procedures is indicated on the label.

Adding shine

To give a fur product a beautiful shine, you can use a weak solution of acetic acid, glycerin or lemon juice. You need to thoroughly treat the fur with one of these products, and then wipe it with a napkin.

In addition, a special product made from fish oil (100 g), ammonia (12 drops), ordinary laundry soap (10 g) and boiling water (1 l) will help to add shine to a fur product. All these components must be thoroughly mixed, then the resulting solution must be cooled to a temperature of 35 degrees and the fur must be thoroughly treated with it. If the fur coat is dusty, then you need to wrap it in a damp sheet and then knock it out.