What is the difference between dry cleaning and wet cleaning?
There are two ways to clean a mouton fur coat from dirt: dry and wet. The first involves the use of brush, bran, starch, oatmeal and other bulk products. Dry cleaning does not harm the mouton. However, the first method is suitable for quickly removing newly formed stains.
Wet cleaning helps to cope with stubborn dirt, traces of grease and tarnishing. This option involves briefly soaking the fur coat in the prepared solution.
Cleaning a light-colored mouton fur coat
To clean Mouton lightweight coating at home, mix starch and refined gasoline in equal proportions. This porridge should be smeared on the wool and allowed to dry. Starch will absorb fat from the pile, and gasoline will clean it of yellowish deposits. If possible, take the clothing out into the fresh air and scrub off the dry mixture with a stiff brush. Let him air you out. Judging by the reviews, it is better to use corn starch with this cleaning method, as it has a lighter consistency and absorbs dirt and dust better.
A light fur coat made of mouton becomes yellowish with patina over time. To clean fur at home and make it spotlessly white, use hydrogen peroxide. Dilute in water in a 1:1 ratio, spread over the entire surface of light wool and let it dry naturally. Then comb the fur with a stiff brush.
For further periodic cleaning of light wool, you can purchase a special product in a can. You can also use products made of nubuck, velor and suede.
How to clean a mouton fur coat
When choosing a method for cleaning a mouton fur coat, you need to determine the type of stains that appear on the surface. It is also recommended to test the selected product on an inconspicuous part of the product before the first procedure. If you purchased a professional product to remove stains from a mouton fur coat, then you need to clean the clothes according to the attached instructions.
Cleaning from yellowness
To wash fur clothes with yellow stains, hydrogen peroxide is used. This substance is suitable for cleaning both dark and light-colored items. To remove yellowness you will need:
- Mix 3 tbsp in a container. l. table salt, 5–7 ml of hydrogen peroxide and 0.5 liters of water.
- Fill a spray bottle with the solution.
- Apply the solution to the contaminated area, holding the spray bottle at a distance of 20–30 centimeters.
- Wipe with a dry sponge.
If, in addition to yellow spots, you need to get rid of the unpleasant odor that a fur coat exudes, then it is recommended to use the following method:
- Mix 60 g in a separate container. salt, 5 ml of pure alcohol and 2 glasses of water.
- Apply the mixture to contaminated areas.
- Clean the mouton with a suitable brush.
The alcohol composition is recommended for cleaning light fur coats. Dark products are lightened after this procedure.
After wet processing, the cleaned fur product must be hung on hangers and left to dry, avoiding direct contact with sunlight or close proximity to heat sources.
From dust and dirt
Potato starch and bran help deal with fresh stains. To remove such contaminants you need:
- Lay out the fur coat on a flat surface.
- Sprinkle starch generously onto stained areas.
- Rub the starch into the mouton and leave for 30 (if dirt gets on the fur) or 60 (to clean fat) minutes.
- Shake the fur coat.
The described procedure must be repeated several times if necessary. Otherwise, as well as to remove difficult stains, the following method is used:
- Pour a small amount of water into the container, warmed to room temperature.
- Add shampoo (washing gel) to the water and whip up the foam.
- Apply foam to the fur coat and leave for a few minutes.
- Remove foam using a mouton brush.
A steam generator can help with simple stains. To do this, you need to hang the fur coat on hangers and, having selected the delicate mode on the device and holding the device at a distance of 10–15 cm, treat the fur with steam on all sides.
You can clean old traces of unknown origin using the following method:
- In a separate container, mix gasoline and starch until thick.
- Apply the mixture to the area with stubborn dirt.
- Wait until the mixture is completely dry.
- Remove the paste with a fur brush.
On a mouton fur coat, like other items of outerwear, traces of grease often appear, which are localized mainly on the cuffs and collars. You can clean such stains as follows:
- Mix water, 9% vinegar and alcohol in equal proportions.
- Apply the resulting solution to a brush or cloth and wipe the greasy areas, moving against the pile.
- Wipe the treated areas with a paper towel.
After long-term storage, the fur coat also requires cleaning. In this case, the product is vacuumed and combed using a fur brush. An aqueous solution of vinegar helps remove accumulated dust by soaking a thin cloth in it and hanging it over the fur coat for a few minutes.
Methods for cleaning a mouton fur coat at home
Owners of a fur coat made from natural fur of any breed know that competent and regular cleaning, as well as careful care of the product, can keep it in its original form for a long time. Also, happy owners know that natural fur cannot be wet, which makes cleaning it yourself very difficult.
Important! In some cases, wet cleaning is indispensable, especially when heavily soiled, but certain rules must be followed.
—>
Dry method
This is the simplest and most gentle cleaning option for products made from natural fur. Experts recommend using oatmeal for this. It is enough to simply distribute them over the surface of the fur coat, pressing it tightly against the wool and let the product lie there for 30 - 40 minutes.
Then the flakes are carefully cleaned using a special brush for natural fur. As a result, all dirt, dust and dirt should disappear, and the fur coat will acquire an extraordinary shine. This is the easiest and fastest way to get rid of dirt on a mouton fur coat.
Wet cleaning
If the dirt is deeply ingrained and the fur has lost its original shine, you should arm yourself with a solution of 9% vinegar and wet clean the outerwear. However, in this case you need to be extremely careful and ensure that the fur is not damaged.
!— Yandex.RTB RA-461895-21 — >
—>
The sequence of actions is as follows:
- In a large container, mix cool water and vinegar 9%;
- immerse a white, clean sheet in the solution;
- take it out and squeeze out the liquid well;
- take the fur coat out onto the balcony and hang it on a hanger, straightening it carefully;
- place a damp sheet on top;
- beat off with a carpet flapper.
After this, all that remains is to remove the dirty sheet and thoroughly dry the product under natural ventilation. This will also help get rid of the lingering vinegar smell.
How to clean a light mouton fur coat
To clean a white fur coat, it is recommended to mix water and hydrogen peroxide, taken in equal proportions. The resulting solution must be collected in a spray bottle and sprayed onto the contaminated area. After this, the pile should be wiped with a dry cloth.
Before the first procedure, the specified solution must be applied to an inconspicuous part of the fur coat and check whether the mixture leaves behind white spots.
How to clean if your fur coat has turned green
A mouton fur coat acquires a green tint with prolonged contact with direct sunlight. The following method helps restore the original color of clothes:
- Dilute water and hydrogen peroxide in equal proportions in a container.
- Soak a cotton pad in the solution and treat the green fur.
- Hang the product on a hanger and let it dry for half an hour.
- Remove any remaining solution from the pile.
If the above method of cleaning a green fur coat does not bring results, you can restore the previous color through professional treatment.
Cleaning the lining
To clean the lining of a mouton fur coat, you need to dilute liquid soap or washing powder in water. Next, you need to treat the inside of the product with this product, paying attention to the armpits and neck area. At the end of the procedure, the lining should be rinsed again with a sponge soaked in water.
Lining care
When wearing a mouton fur coat, you may encounter both external and internal pollution. They often appear on the lining, which forces the owner of the product to put a lot of effort into removing the stains. If the lining is not removable, it will be difficult to clean.
Soap solution can be considered as an effective solution. It is used according to the following instructions:
- A sponge or cotton swab is immersed in the soapy mixture, wrung out thoroughly and used to wipe problem areas.
- After this, the surfaces are cleaned with a sponge treated with clean water.
- The lining is dried with dry wipes.
If it is possible to unfasten the lining, it should be washed in a warm soapy solution, rinsed and dried. For washing, you can only use warm water. Otherwise, the material will shrink and the fur coat will lose its shape. You can remove yellow stains with hydrogen peroxide, salt and water.
When is dry cleaning necessary?
You will have to resort to dry cleaning services if there are large and old stains on the fur coat, and the product itself emits an intense odor that does not disappear after prolonged airing. Dry clean only clothing will also require professional assistance.
Mouton fur coats have increased maintenance requirements. Such products get dirty easily and cannot be washed in machines. To remove stains from a mouton, both specialized and folk remedies suitable for a specific type of stain are used.
Cleaning your fur coat using special products
If you do not want to experiment with fur for fear of spoiling it, you can use special ready-made products to clean it. These are now very widely represented on the market. The most popular mixtures today are Insaf, Ultra Finish Milk and some other imported products. They are suitable for any type of fur and can be used not only to clean it, but also to prevent the occurrence of dirt on it.
You can also clean your mouton coat with folk remedies. Let's look at them in more detail.
Video: fur cleaning process:
Cleaning a light mouton fur coat
How to clean a covering made of white or light muton, because over time such a product will turn yellow and lose its beautiful appearance? But there are several ways to clean a mouton fur coat to restore its whiteness and make it more shiny.
Hydrogen peroxide
Dilute it in water in a ratio of 1:2 and apply the solution to the wool.
Hydrogen peroxide and ammonia
A mixture of hydrogen peroxide and ammonia will help. Work the sponge over the surface of the clothing and you will see the result.
Dry cleaning techniques are not always applicable to contaminated fur. This includes grease, food accidents, grease and other problematic stains where a regular brush will not solve the problem. Treat the surface with a brush soaked in the solution or a piece of foam rubber, then dry with a paper towel and leave the product on your shoulders indoors until completely dry. Over time, the white muton loses its shine and turns yellow. Thanks to simple measures, you can restore wool to its former whiteness and give it shine.
