The hooks on the fur coat come undone

Share on social media networks:

Many owners of warm fur products believe that any work on repairing a fur coat (mink, wool, etc.) should be carried out only by professional fur coat makers. However, it also happens: the hooks on the fur coat are loose and unfastened - what to do? The task is not the most difficult, and you can cope with it quite independently. In order to repair a hook on a fur coat, it is not at all necessary to spend most of your time going to the workshop - just perform a few simple manipulations. Today we will tell you how to carefully, correctly and efficiently put everything in order so as not to spoil an expensive item.

Getting ready for renovation

If the hook on a fur product breaks, the part will need to be repaired or completely replaced. Replacing a hook does not require special knowledge and skills, however, you need to know at least a little sewing in order to complete the job accurately and accurately.

Tools

To work you will need the following tools:

Furrier's or sharp stationery knife. You can also use small scissors with pointed ends (for example, manicure scissors), but working with them requires experience and dexterity.
Needle and thread (as strong as possible). For manual work, it is best to use a special triangular needle designed for working with leather.
Medium size hooks. A piece that is too massive will be out of place, and very small hooks can easily break or come undone.
A piece of elastic fabric.

Adviсe:

For sewing, choose a thin, strong and long needle to protect the flesh from damage during piercing.
If you do not have too dense threads, then use regular thread, folding it several times.
Choose threads and hooks that are the most suitable in color, even if they are almost invisible. The fastener should not stand out too much.
When purchasing new hooks, pay attention to how they fasten. Please note that in frosty times your fingers sometimes do not obey, and it will be quite difficult to cope with a hook that is fastened too difficult and tight.
Upon completion of the repair, it is necessary to restore the position of the pile. To do this, use a natural bristle brush (not very hard) or, as a last resort, a pet brush.

Important! Before restoring a matted area of fur, wet it with warm water and glycerin.

If you do not plan to replace your fur product with a new one in the near future, you need to make efforts to ensure that it remains beautiful and durable longer. And our detailed collections of tips from articles will help you with this:

How to care for a fur coat?
How to restore the shine of fur?

What to prepare before replacing the hook

If the hook on your fur coat is broken and needs to be repaired, first of all you need to prepare everything you need. The necessary items should be at hand so that you don’t have to be distracted at a crucial moment. We will need:

scissors;
needle;
hooks;
threads

It is recommended to choose the most dense and high-quality threads. This will provide additional durability to the hook. If there are no too dense threads in the house, but you need to sew it urgently, then you can simply fold a regular thread several times.

Hooks and threads should be chosen in the most suitable color. Although they will be practically invisible, since they are on the inside, it is still not desirable for them to stand out particularly.

It is better to choose medium-sized hooks. Too massive ones will be inappropriate, but very small ones will not be suitable either - they can easily break or come undone.

For such purposes, it is better to choose scissors with pointed ends and small ones. The best ones for this are the usual ones from a manicure set.

Where and why are hooks sewn to a fur coat?

First of all, it’s worth figuring out where hooks are usually sewn on fur coats. Typically, these products are used instead of buttons, as well as to secure a collar or hood. Before sewing a hook onto the hood of a fur coat or collar, you need to clearly determine its location.

You must understand that at the same time the collar must be fastened tightly so that cold air does not blow in there (and the hood does not fly off on its own), but at the same time not too tight - you should take into account the fact that it is in this place that the scarf. Therefore, when designating the future location of the hook, it is better to take measurements after putting on the scarf.

Hooks have recently been used more often than other accessories. This is due to the fact that zippers on fur coats are almost never used, but buttons have already gone out of fashion. Ordinary buttons often do not look aesthetically pleasing and spoil the overall impression of outerwear, and if the buttons are made internal, this will significantly complicate the process of fastening them. This is a significant problem especially in winter. The hooks meet absolutely all the requirements :

easy and simple to unfasten;
hold tightly enough;
almost invisible.

What fasteners are best for a fur coat?

To fasten fur products use:

Hook with a special ring. The fastening system can be of two types: with a fastening element and a movable element. There is also the simplest type of hook - a fixed one. Products are made of metal and plastic.

Important! Plastic fasteners are inferior in strength to their metal counterparts, so, if possible, use metal fittings, especially if you are the owner of a heavy, floor-length fur coat. Plastic hooks may well be suitable for a fur vest or light short fur coat.

Decorative fasteners in the form of clips and decorative hooks. Decorative elements are an additional decoration of the fur product. Most often, such accessories are used for short-pile fur coats so that decorative elements are visible.

Important! Buttons can also be used.

Adviсe:

If you have to travel very often on public transport, then use fastening hooks so that the fur coat does not unfasten under the pressure of the crowd. Most often, such incidents happen with models that are flared to the bottom.
The most common option is a simple metal hook with a movable tongue. Such hooks are suitable for both short and long fur coat models, regardless of the length of the pile. This type of fastener is considered reliable and looks original.
If you want to use a decorative hook on your outerwear, don't overdo it. There should only be one such accessory. It is best to sew it on the collar so that the accessory acts as a brooch and at the same time secures the hood.

Important! Shiny accessories with stones look most impressive on plain clothes. A large size of decorative decoration is allowed, the main thing is that the accessory matches the model of the fur product.

It may not make sense to spend time repairing a fur coat if its style is already somewhat outdated. It’s better to immediately arm yourself with step-by-step instructions and update it completely. Find out how to alter a fur coat with your own hands.

Preparation for repair

If the hook on a fur coat is broken, it needs to be repaired or replaced with a new one. This procedure does not require any special skills or knowledge, and the only requirement is to be able to sew so that the work is done accurately and accurately.

First of all, you need to prepare the tools that will be used:

A piece of elastic fabric.
Small hooks - small ones can come unfastened, but large ones look ugly.
Needle with thread. It is best to buy a triangular needle, which is used for working with leather products.
Stationery or furrier's knife. If you don't have them, you can use nail scissors.

General recommendations:

The needle should be thin and long.
You need to buy a thick thread, if you can’t find one, you can use a regular one, folding it in half or four.
Threads and hooks must match in color so that they are practically invisible in appearance.
If you buy new hooks, you need to check the mechanism for fastening them. It should not be tight or complicated, because in winter your fingers freeze and a heavy mechanism will not be appropriate.
Upon completion of the repair work, take care of the pile by restoring its position with a brush.

Important! Before restoring matted fur, it must be moistened with a solution of warm water and glycerin.

How to fix a hook on a fur coat without replacing it?

If the hooks do not hold on the fur product, this may be due to the following reasons:

The fittings became loose during use. If the mechanism is broken, try to lightly pinch it using ordinary small pliers. Do this as carefully as possible so as not to break the part.
The threads are partially torn. Re-sew the hook, replacing old threads with new ones or making additional stitches to strengthen the fastener.
Incorrect fitting size. Hooks that are too small cannot hold the material of the product well. Incorrectly selected fittings should be replaced.

How to sew a hook to a fur coat?

To sew on the fittings and solve the problem, the hooks on the fur coat are unfastened - what to do, you must first determine its location. If you want to secure a hood or collar with a hook, then you need to clearly understand that a scarf is usually put under the collar, and the hood needs to be fastened so that it does not fly off. Therefore, very carefully determine the location of the future hook - it is best to take measurements after putting on a scarf.

Important! One more point to remember before sewing on the fittings: all fasteners are made on the lining, without touching the main skin. For example, the inside of the hook should be hidden under the lining.

Preparation

When replacing an old broken part with a new one, you must first remove the old fastener by performing some operations:

pick up the seam on the lining to get to the hook;
If the lining is not sewn, then you should turn the fur coat inside out and find the desired element.

Important! Some craftsmen rip out the seam on the lining that runs from the sleeve to remove the old fastener hidden behind the flesh.

We repair hooks

In order to install the hook yourself, strictly follow the following recommendations and complete this process step by step:

If there were no other fittings at the fastener site, then make a small cut in order to remove the necessary part of the hook. If you are replacing old fittings with new ones, then sew up the place of the old fastener (except for the slot for the new hook) and strengthen it with adhesive fabric or a piece of leather. First, make a slot on the leather material for a new fastener.
Sew a hook on the inside of the lining. Typically, the base of the hook has several holes. To ensure that the fastener “sits” firmly on the flesh and does not tear it, sew all the holes to evenly distribute the load.
Sew up all the undercut areas of the lining layer by layer. Make new seams as carefully as possible. Try to keep the bulk of the threads on the inside. Sew the last lining to the fur collar using a hidden seam.

Important! When sewing, do not pull the thread too hard, as the core may tear.

If you need to sew on a hook ring, take careful measurements first so that the hardware is level. The ring can be sewn to the lining, securing it in two places with strong threads. A more reliable option is to undercut the lining in the right place, thread the ring through the two holes made and sew it on the inside of the lining, just as in the case of a hook.

Adviсe:

To avoid stretching or tearing of the membrane, reinforce the fastener with a piece of thick fabric, leather material or adhesive fabric. Sew the patch by hand, leaving a hole for the hook first.
If the fur of the fur coat is thin, then secure the ring with a strip of leather.
Buy only high-quality hooks so as not to change them often, since a fur coat is a very expensive item and the lining should not be trimmed regularly.

Or maybe it makes sense to give yourself a great gift and simply update your wardrobe, buy more fashionable and beautiful clothes for the winter? Then it’s time to learn and remember all the details of how to choose a good quality fur coat.

Ways to replace hooks on a fur coat at home

Many owners of fur coats believe that any work on their repair should be carried out only by professional craftsmen. In fact, this is not entirely true. And you don’t always have the financial opportunity or even just the time to go to a workshop. Plus, it's actually not such a difficult task that you can't handle it yourself.

Many people are interested in how to put a hook on a fur coat. In fact, there are clear instructions, but first you need to consider several equally important nuances before getting down to business.

Replacing hooks with buttons

Many owners of fur products believe that hooks often fail, and their replacement requires painstaking work, so it is better to replace them with buttons. We hasten to dissuade you, making such a replacement is not at all easy. The main difficulty lies in the design of the loop. In order to make a loop, you need to have the appropriate technique that will help you process the edges so that the pile does not fall off in the cut areas.

If you decide to change hooks to buttons, then listen to the following recommendations:

Make the loops internal. They are easier to arrange. Proceed as follows: in the place where the hook ring was sewn, form a loop from dense threads. You can also use a thick elastic band, but it will have to be changed periodically, as it will stretch over time.
To replace a hook with a button, first remove the old hardware and sew up the holes left by the removed hardware using light stitches. From the inside, lay adhesive tape over the place where the hook was and install the desired part.

Be sure to learn everything about how to store a fur coat so that it will last you more than one season.

How to replace hooks on a fur coat with your own hands

I am sure that this question worries everyone who has a fur coat. As a person who has extensive experience in repairing fur products, I will say that a third of all orders are the replacement of fur coat hooks. But you can replace them yourself. This detailed master class is devoted to how to replace hooks on a fur coat with your own hands. If you know how to use a hand needle and you can sew seams by hand, then you can easily change the hooks on your fur coat yourself or help others with this. Learn new things and save money.