You can decorate a denim jacket with patterns, embroidery, lace, beads, or you can even change its color beyond recognition. After simple manipulations, the jacket will look renewed and you will want to wear it again.
When choosing any of the alteration options proposed below, you need to take into account that after the work done, the jacket will change its style. If classic denim can be worn with anything, then a product with lace will look ridiculous with wide sports trousers. Remodeling is possible even from improvised means that can be found at home.
How is embroidery done on denim?
Embroidery is always stylish and beautiful. She is now at the peak of popularity, so this method of alteration is one of the most favorite among fashionistas. You can choose simple or complex elements for embroidery, the main thing is that you have the perseverance to complete the work to the end. Embroidery requires patience or perseverance, especially if it is floral arrangements. Alternatively, you can embroider symbols, the first letter of the name, a separate flower, etc.
You only need to embroider with thick, dense threads. Denim or floss are ideal. Theoretically, you can work with standard ones, but the embroidery will not turn out so bright and attractive.
Important! As when working with embroidery on other products, you will need a hoop, and to transfer the design, you will need water-soluble interlining or carbon paper. If non-woven fabric is used for embroidery, you can embroider on it, and it is removed after completion of the work.
Embroidery patterns - options
You can embroider using satin stitch, chain stitch or cross stitch. In the latter case, embroidery patterns can be found online and printed for transfer to fabric. There is another option - embroider a design you like on canvas, then cut it out, trim the edges and sew it onto the jacket. In this case, you will get something like an application. Examples:
Torn edges and tears
Like embroidery, torn edges and abrasions are relevant for jeans. First you need to mark with chalk or soap where exactly the abrasions are needed.
Important! To make it more convenient to work with the jacket when cutting through, plywood should be placed under the bottom. To ensure immobility, secure the product with tape or pins, depending on the surface.
The marked areas can be rubbed with sandpaper to make cutting easier and the gap to look more natural. After this, arm yourself with a stationery knife and make slits along all the marks. After this, all that remains is to pull out the threads. Jeans in its structure resembles a mesh with the intersection of vertical and horizontal threads. So, you need to remove as many blue vertical threads as possible so that only white horizontal threads remain.
If you don't need holes, but only small abrasions, then you can do it even simpler. Take a regular metal grater and rub the jacket in the designated areas.
Important! To create a distressed effect, the denim should not be too thick and not too thin, as these models are quite difficult to work with.
Preparation
Lay the jacket flat on a horizontal surface, aligning the sleeves at the armholes. Cut the sleeves off the jacket, leaving a seam allowance of about 2.5-3 cm.
Also cut the sleeves from the sweater with a similar seam allowance.
Love, prosperity and more: 5 zodiac signs who will have luck in the spring
Step-by-step recipe for making tender cakes with caramelized pineapple
The work is worth it, but the deadline is ticking. Let's remember the unique Alexey Smirnov in his phrases
Place the pieces next to each other.
If the sleeves are slightly or much wider than the armhole of the jacket, then sew them up to the desired size. This is easy to do along the existing seam. It is also possible to widen a narrow sleeve, but this will require much more effort. You need to open the sleeve along the seam, insert the fabric cut from the sweater, and sew the blanks on a machine. The inserted piece should be in the shape of a triangle. Ultimately, the width of the sleeve at the top and the width of the jacket's armhole should match.
Painting
The painting is very impressive on the back, making the product creative and bright. It is very difficult to remain indifferent when considering such alterations. The operating algorithm is quite simple. Acrylic paints are used for fabrics that can withstand washing well. First you need to draw a sketch with a disappearing marker, and then go over the top with a brush with acrylic paints. It dries for 2-3 hours, after which you fix the design with a hot iron on both sides.
How to dye a jacket?
For those who don’t like different decorative elements on clothes, but don’t mind updates, dyeing a denim jacket would be an ideal option. You can use both aniline dyes and natural ones with equal success. Since natural ones do not give a rich color, but rather a tone, light models - white or blue - are suitable for this method. For example, use beets to give a delicate pink tint; a vintage effect or beige tone can be achieved by using strong tea or coffee for painting.
Bleaching
To do this, you will need bleach or other household chemicals containing bleach. First you need to dilute the bleach in a container.
Important! The container must be spacious enough to completely fit the product and make it convenient to mix for uniform bleaching.
Place the product in a container, let it sit for about an hour, change sides and keep it for another hour. After this, you need to take it out and rinse well, preferably in a washing machine, so that there is no bleach smell left.
Divorces
It also looks impressive and is easy to do. At the same time, stains and drips can be made in different ways. The fastest way is to pour the white into a spray bottle and spray the jacket evenly. Or draw bleach into a syringe and apply it using chaotic hand movements. Well, a more thorough option is to use a brush. And similar to bleaching, after work the item is rinsed well.
Ways to decorate a denim jacket
The beauty of decorating lies in the limitless field for realizing ideas. If you use lace, the denim will look like a summer one. When using fur, you immediately get a feeling of warmth and comfort, more suitable for use in the fall.
Rhinestones and sequins
Sequins can be sewn on the sides and collar or randomly along the shelves of the product. It is worth noting that it is not necessary to sew on every sequin; it will be much faster if you use hot silicone glue. Rhinestones are glued using special glue and tweezers.
Beads
Beads are good for embroidering compositions and entire pictures, or you can go over all the edges - cuffs, collar and sides. It is important to sew on the beads with a strong, thick thread. If you are inspired to embroider a composition, then again you need to first draw a sketch with chalk or pen.
Beads
Pearl beads sewn in a checkerboard pattern across the entire surface of the product look impressive. You can decorate the edges of a collar or a pocket with a flap this way. Beads are suitable for any size, the main thing is that the product is comfortable to wear later.
Lace, braid
Using lace or braid, you can give the jacket a romantic touch. It is enough just to sew lace to the bottom of the item, as well as to the cuffs. This is done from the wrong side of the product so that the lace peeks out coquettishly from under the rough jeans. The braid is sewn to cuffs, pockets or at shoulder level.
Spikes and rivets
These decorative elements give the product a “punk” stylization, which is popular among young people today. Spikes and rivets can be attached to the collar, along the sleeve line or in the shoulder area with imitation “epaulets”.
Knitted elements
You can crochet leaves and flowers yourself, and then sew them onto your denim. An interesting effect is obtained if you attach a round crocheted napkin to the back.
Fur
It is better to work with short fur that does not fray; there are many synthetic varieties that resemble fabric. You can line the cuffs and collar with fur, thus insulating the jacket. Now it’s fashionable to make fur elements, so feel free to sew fur on your pockets.
Patches and applications
A large assortment of stripes is available in hardware stores. But it’s better to make your own appliqués from a different fabric. These can be flowers, symbols, animals, figures, emoticons. Patches and appliques look best on the front of the jacket.
Tools and materials
If you don't have a denim jacket at your disposal, you can purchase one at your local second-hand store. There you can also pick up a sweater from which you won’t be sorry to cut off the sleeves. In addition, you can create a jacket based on a denim vest.
What you will need:
- Denim jacket or vest.
- Sleeves from a knitted sweater (the size of the parts must match the size of the armhole of the main product).
- Scissors, pins.
- Sewing machine and sewing accessories.
How can you alter a jacket?
There are a lot of options to change denim by altering it. You can remove the sleeves and the jacket will turn into a fashionable vest, or cut it out of a different fabric and sew it on instead of the previous ones. In this case, the fabric can be either dense or transparent. If the jacket has pockets, they can be removed in the same way, replacing them with a contrasting element.
Make a bolero from denim. The simplest option for this alteration is to cut out the belt at the bottom of the product, shorten it to chest level and sew the belt back on. Thanks to the factory belt, no one will even guess that this is an alteration.
You can upgrade your denim jacket and make it suitable for winter use. Buy faux white fur and sew it on as a lining. In this case, the jacket should be slightly loose before alteration, since fur can make the product one size smaller.
There are many options for giving new life to a new jacket, the main thing is not to overdo it, using everything . After all, the main goal of such modernizations is to look stylish, not funny. It is necessary to select the alteration that will best match the prevailing style of clothing in the wardrobe.
How to convert a men's jacket into a women's one
Remaking a boy's or man's jacket into a women's jacket is another opportunity to update your wardrobe. This method will be especially convenient for beginning craftswomen. You can use a pattern taken from Burda. In this case, there will be no fear of doing anything wrong. After all, the base of the jacket has already been made and only a few relatively simple operations need to be done.
Men's jacket before alteration
Today, denim jackets for girls and women are back in fashion. Previously, their popularity peaked in the eighties and nineties. If a men's jacket has been preserved from that time, it is not difficult to update it by turning it into a fashionable women's item. This can be done in several ways. One of the most popular will be described below.
After the rework
You can do this as follows:
- The jacket needs to be shortened. Due to the fact that breast darts were not provided, the situation can be corrected in the indicated way. It is enough to raise the edge no more than 5 centimeters.
- You need to draw a new edge evenly along the entire jacket.
Bottom of an old jacket
- Since the material will bulge on the back (especially if the jacket is oversized), you will need to sew the jacket at the bottom. It is convenient to do this on the sides. To measure, you need to pin the seam and draw with chalk the places where the fabric needs to be hemmed. Typically the width of the gap at the bottom of the seam is approximately 2 cm.
- The side seams should be basted, but not sewn. At this stage they cannot be ground down. It makes sense to do this only after trying it on. The allowances must be carefully ironed so that they do not puff up.
- After adjustments, the length of the belt should decrease by approximately 4 cm.
- When the fittings are done, the excess fabric is trimmed and all the necessary seams are sewn.
Important! You can already wear this jacket. However, you need to understand that converting a men's jacket into a women's one does not come down to fit. An important part of it is the redesign of the style.
To do this, you can, for example, do the following:
- Draw a butterfly-shaped pattern on the back. A sample for this can be downloaded from the World Wide Web.
- To do this, you can use soap to apply the contours of the design onto the fabric.
- The outer line can be obtained by tracing the workpiece, and the inner pattern can be copied.
- Then along the top of the line one more time is made with a marker.
- After this, the pattern is drawn using paint.
You might be interested in this About patterns and sewing procedures for a-line dresses
Then you need to let the fabric dry. To secure the pattern, it is recommended to iron the pattern.
Butterfly pattern
Another option for this alteration is to additionally remove the sleeves. The denim jacket turns into a stylish sleeveless vest.
Updated jacket from the back
