How to choose a beaver fur coat? This question interests many fashionistas, and besides, they are becoming no less popular than mink. And looking into the past, their demand becomes clear.
A little history and the reasons for choosing a beaver fur coat
Previously, such fur coats were popular. But, due to the lack of processing upgrades, the models became too large and rough to highlight feminine forms.
If you pay attention to the last century, these fur coats were intended only for men. They preferred to dress fashionably in beaver furs. It is enough to imagine before your eyes a photograph of an effective satirist of the late Victorian era. O. Wilde, in his life, repeatedly went out in public wearing a fur garment with a beaver collar.
Also, this clothing became the choice of wealthy Russian boyars, who preferred such outfits in winter. Yes, men used to wear fur more often, but it’s good that cutting and sewing masters were able to make them a little more beautiful and more organic for amazing and fragile women. And today, all women can admire and show off their unique shapes in the winter months, when many try to hide their beautiful curves under massive down jackets. If you choose a beaver fur coat, it will last up to twenty years without losing its aesthetics.
How to choose a beaver fur coat
So, why do you need to choose and purchase a beaver fur coat? It stands out for its special design, rich in down, which makes the product warm. It is protected from moisture in the form of snow and rain. In addition, the fur is durable and is in third place, after the otter and the bear.
The beaver is at the top among all fur-bearing animals, whose skins are used during the production of fur coats. On average, a fur product does not lose its aesthetics for more than twenty years. At the same time, the mink that everyone buys will look neat only for ten years. This is what causes the relevance of the beaver and its frequent acquisition. The main thing is to evaluate the fur before buying a fur coat.
Beaver Fur Evaluation
Before buying a beaver fur coat, you need to look at the fur itself. The fur is examined with the fingers. The peculiarity of the beaver is the maximum down ball, which differs in the length of the pile. They are several times smaller than other hairs. Counterfeits are produced precisely because people do not know this information.
After checking the down, you need to stroke the product along and against the hair growth line. Along the growth line - you will feel softness, weightlessness, against - a slightly tingling sensation. These tactile sensations are a signal of the right fur.
After determining the tactile sensations, it is worth paying attention to the skins being sewn along a given line, which is rare. And you also need to make sure that after checking there is no hair left on your fingers. Feeling fat is also prohibited.
The sound of a fur coat will help determine its authenticity. You need to shake the product and listen to the sounds. If popping or crackling noises are heard, the beaver is made of poor quality and it is better not to buy a fur coat.
The seams are just as important as the sound. There should not be any and the quality of the seal is ideal. To determine authenticity, you can lightly pluck the hairs, which should not stick to your fingers or remain on your hands.
Authenticity is assessed by the hem of the fur coat or its hands. They are clenched tightly into a fist, then immediately released, while it is important to pay attention to how quickly the fur is restored. The right product will do this instantly and the compression area cannot be found.
Color is considered important; the fur coat should have an organic shine, be of the same tone, and the flesh, on the other hand, should be of a light shade. True, this rule applies only to natural products; if the fur coat is dyed, the authenticity of the item cannot be established.
The dimensions are assessed, the fur coat must be massive and heavy. The rule does not apply if the fur has not been plucked or cut. Learning to choose a real beaver fur coat is not at all difficult.
How to care for a beaver fur coat
In terms of its properties, semolina is very identical to starch, but has larger particles. To remove dust from the pile, it is recommended to use it specifically. From time to time, these two free-flowing consistencies are combined, mixed and cleaned with beaver fur. Semolina does not have any coloring substances, has a light color and is therefore perfect for cleaning snow-white fur products.
Ammonia. To give a fur coat a pleasant smell, you need to spray it with perfume. Alcohol is found in almost all eau de toilette and perfume, and it has a detrimental effect on the hair. You can remove greasy stains using ethyl alcohol mixed with vinegar.
How to care for a beaver fur coat
The two ingredients are combined in equal proportions. Moisten a sponge in the purchased water and use it to wipe the dirty areas on the fur coat. To remove the persistent aroma of alcohol, the product is first wiped with a clean, damp sponge, and then ventilated in fresh air. Hydrogen peroxide. A wrinkled item can be ironed from the lining fabric side.
This is strictly forbidden. Under the influence of high temperatures, the skin can stretch or shrink, in which case it will no longer be possible to save the fur coat. The cleanliness of the fur can be assessed by the color of the starch on the product: if it is black, it means the product is dirty and the function must be repeated; if it is clean, it means all dirt has been removed. Semolina.
To remove dust particles from beaver fur or get rid of the yellowness of the pile, use potato starch. It has good adsorbing properties, i.e. practically absorbs all contaminants. The beaver fur coat is laid with the lining down. Sprinkle starch on top and spread it with your hand over the entire area of the product, so that it gets inside the pile.
Wait a couple of minutes and shake off the product. Heated sand. Some craftsmen recommend not cleaning beaver fur, especially shorn fur, using the wet method, but using bulk substances, for example, sand, to clean it. At first glance, the method seems very strange, but it turns out to be very effective and perfectly removes grease, dust, dirt, returning the product to its original appearance. Before you start cleaning, the sand must be thoroughly washed and dried, then it is dumped into a frying pan or any other large container suitable for frying, and heated, you cannot use very hot sand, otherwise you can damage the skin, the fur product is laid out on the surface with the lining fabric down, generously sprinkle hot sand on top and rub it with your hand so that small particles seep inside; after a couple of minutes, shake off the product and remove the remaining sand with a brush.
If it was not possible to remove all the dirt the first time, then repeat the function. Starch. A clean sponge is soaked in water, wrung out well and wiped off the dirty areas. When all the dirt and dust have been removed and the product is perfectly dried, it is treated with a layer of glycerin so that the pile shines and becomes softer. 6 main methods for cleaning a beaver fur coat. With the advent of cold weather, a fur coat becomes a favorite outerwear for many ladies. Question: how to clean a beaver fur coat at home? - is more pressing, because after the warm season and storage in the closet it needs to be put in order. Beaver fur is popular because of its own characteristics: it is wear-resistant, retains heat well, is pleasant to the touch and does not allow water to pass through.
This rule is absolutely not suitable for natural fur. After washing in the washing machine, you will get an irreparably damaged product. The fur can be washed carefully using a soap solution or other products listed above, but it is important to ensure that the skin does not get wet. It comes out through the most complex processing of fur, due to which it has a fairly impressive price.
The above products are suitable for virtually all types of pile, with some exceptions: It is recommended to clean only trimmed fur with ethyl alcohol; it can simply “burn” long ones. Natural length fur is best cleaned with ammonia. To remove dust from a sheared item, simply knock it out, it is not necessary to use different bulk sorbents.
You can clean a fur coat made from natural beaver fur using different means. Most of them can be found in every home. To remove minor contaminants, for example, dust, shake the product well and brush it with a thick brush. Cleaning more severe stains will require some time and effort. Shampoo with glycerin. If you want the product to smell pleasant, place bags of dry fragrant herbs on the shelves. Proper care of a beaver fur coat will allow it to warm its owner for many years to come.
Video: how to clean a beaver coat? Tips for properly cleaning beaver fur. In order to properly clean a beaver fur coat, you first need to find out what type of pile there is in order to choose a more suitable care option. long natural pile. In most cases, it is used for decorative processing of sleeves and pockets, cut pile.
It looks much neater than the first option and is significantly lighter in weight, which is why most of the products are made from this type of fur, plucked fur. To give the fur a careful look, you need to comb it with a special comb; beforehand, you can carefully walk over the surface of the pile with a moistened sponge. To dry quickly, the fur coat must be dried on a radiator. The highest temperature will lead to drying out of both the pile and the skin, and if it comes to light fur, it will take on a yellow color. Beaver fur coats can only be dried outdoors at room temperature. Free-flowing consistencies such as starch or semolina are ideal for cleaning light-colored products.
They do not have any coloring parts, so they cannot spoil the snow-white fur. Next, the product is hung in an open room so that it dries thoroughly and finally it is painstakingly combed. To remove grease stains, use the same ammonia (1 teaspoon), salt (1 teaspoon) and a glass of unstained water. To apply the prepared composition to the pile, use a cotton pad or a clean rag. The mixture is left to dry on the product, after which it is removed with a special fur brush. Vinegar.
Natural fur requires constant care. Before putting the product away in the closet after the end of the season, it must be cleaned. The same must be done before the onset of cold weather. A dirty product must be washed. Long pile can be easily cleaned with purified gasoline, while cut pile can be cleaned with sawdust from resin-free tree species.
We are all accustomed to washing clothes as they become dirty, using a washing machine and ordinary cleaning products for this. I don’t know everything about how to properly care for a product made of natural fur, and some misconceptions completely lead to death and damage to your favorite winter items. It is necessary to clean a beaver fur coat only when dirt is noticeable on it. This is absolutely true.
To remove light stains, prepare a simple solution. It contains a glass of unstained water and 100 ml of ammonia. The mixture is painstakingly combined, a piece of clean cloth is blotted in it and the pile is wiped with it, removing dirt and dust from it.
To remove the remnants of the cleaning composition, moisten the sponge in clean water and wipe the fur again. A soap solution will help remove dirt from the pile of a fur coat. Cleaning fur using this product is easy to do at home. A better effect can be achieved if you use shampoo. Pour water at room temperature into a small container. Shampoo is also added there. Hydrogen peroxide removes yellowish stains from snow-white fur perfectly and completely harmlessly.
It is applied with a cotton swab and left on the product. There is no need to rinse off the solution. It is necessary to care for it often, just like any other natural pile. Below you will learn how to do it correctly. Products for cleaning beaver fur at home. Hydrogen peroxide is a faithful assistant to snow-white fur in the fight against yellowness.
A clean rag or sponge is moistened in a 3% solution and the yellowed areas are wiped. After processing, the product must be dried at room temperature, but away from heat sources. How to clean snow-white fur?
Snow-white fur has a special charm, and at the same time it looks great in the winter season. But many representatives of the fair sex are afraid to take light fur coats, because they think that caring for them is very difficult.
Natural, shorn and plucked beaver fur coat
Expensive boutiques offer customers several types of beaver fur products. Natural fur does not raise any questions; everything is clear with it. Its weight should be heavier and look traditional if it has not been treated with dyes.
When choosing a sheared product, you need to inspect the fur even more carefully. It will be much easier. After all, only guard hair is used for a fur coat, which makes the model visually soft and thick. It looks organic, but the most popular trend in the twenty-first century is the plucked fur base. The product is organic and weightless, unique. At the same time, it stands out for its high price and low heat transfer rate.
Beaver from Canada or Russia
Going to a good salon with fur products, most likely the buyer will see only fur coats made from Canadian beavers. But you can also find Russian fur, which is slightly inferior in quality. It’s all because of the weather; overseas, small animals live in frosty regions. It is very cold there, so their undercoat is thicker to withstand sub-zero temperatures. The difference here is not special, but it is better to buy a model from a Canadian animal. The latter is a little more organic, lighter and warmer.
Principles of working with light-colored fur
The listed methods are absolutely not suitable if you need to clean white fur or very light shades. But the problem will be solved if there is a little starch or semolina without impurities at home. You just need to pour the selected product onto the stain, hold it there for at least an hour and remove. Unlike sand, such small particles will be reluctant to leave the fur coat, so in the end the product will have to be carefully knocked out.
We recommend: How and what to clean silver fox fur at home
Over time, a beaver's bleached fur may acquire a yellowish tint. It can be cleaned with 3% hydrogen peroxide. To do this, apply the product to a cotton pad and treat the areas affected by yellowness. There is no need to rinse off the composition, just dry the product and comb it.
The proposed recommendations differ in that they do not have any side effects. They do not lead to the formation of lumps and bald patches, do not leave behind characteristic marks and can be used as regularly as necessary. Only if none of the methods gave the desired result should you contact a fur specialist or dry cleaner.
What copies of fur coats are on the market?
Fake fur coats are less common when compared to mink or sable. Don’t worry, the fur here is unique, and it’s hard to deceive the buyer when evaluating everything according to the given recommendations. You can only confuse those who do not understand anything about fur and have not studied the selection tips.
True, even an experienced buyer can be deceived, who does not yet know that manufacturers under the guise of beavers sell rabbit fur. Fur coats are offered on the market even more often, claiming that these are the children of beavers and such models are expensive. But in reality, this is a Russian rabbit of a certain breed.
It is easy to see a fake; stroking such fur will be pleasant (against and along the line of the fur). Beaver fur, if you stroke it against the line, it itches. In the same way, you can calculate a copy of a shorn nutria. It looks identical, but if you pay attention to the density of the fluff, you won’t be able to find any undercoat there. Now the buyer is definitely armed.
Fur product depending on body structure
If you are a slim and short woman, you can try on beaver products. All models will suit her. For thick-set girls, cropped products are suitable so that the weight is visually reduced. For girls with an apple or B-line figure, it is more rational to buy not only sheared, but also natural fur. Preferably models with an A silhouette with a length slightly above the knee line.
Women with an A-line silhouette will look good with a belted model. The main thing is to try, take your time, experiment, because the purchase does not belong to the budget class. Ill-chosen fur outerwear will add several kilograms to any customer, the main thing is that these excesses go to the right areas on the body.
Good fur outerwear should not only keep its owner warm, but also decorate her. To look beautiful in a new fur coat, you need to choose a model based on the characteristics of your body structure. Here are some practical recommendations:
- Curvy girls should initially pay attention to cropped fur coats - an elongated pile will only add a few kilograms;
- Flared models will look good on girls of average height;
- For girls with massive hips, it is better to focus the attention of others on the waist (be sure to buy a belt).
Features of beaver fur coats: recognizing a fake
So, you have made your choice and are ready to buy. But in order not to become a victim of scammers and to distinguish a real beaver from the animal that they are trying to pass off as one, you need to use our tips:
- To distinguish a beaver from a Rex rabbit, stroke the fur coat along the grain and against it. The rabbit will be soft to the touch in any case, but the beaver's fur will scratch if you stroke it against the grain.
- To avoid mistaking a nutria for a beaver, blow on its fur coat. Did you see the thick undercoat? So it's definitely a beaver.
Product care
And now, the customers have already learned a lot of new and useful information, only one small fact remains - care. Please note that only with rational care will a beaver fur coat last up to twenty years and will retain its aesthetics and warmth until the end of wear. Storage rules:
- the product is stored in a dark place, preferably in a fabric cover, so that the fur can breathe;
- if the product is wet, it is dried at a temperature of 19 degrees (it is forbidden to use a hair dryer) on a horizontal plane. For example, a fur coat can be placed on a table or floor. After drying, the product is combed.
- The fur should not sit too long in one location; it may not be completely regenerated from intense stress.
After winter, it is important to have your fur coat professionally cleaned. Only there they treat all types of fur with high quality. Only such manipulations allow you to extend the life of the fur coat.
Palette and color
The palette of natural shades of fur is quite diverse. Also today, manufacturers prefer a red-brown shade, light on the sides. Today they produce models of different colors, numbering more than 20 shades. The most purchased (rightly called the most spectacular) are black and blue colors.
White, blue, pastel colors look organic. Coffee and red colors look bright, black and gray are simply amazing. If buyers cannot find their ideal dyed shade, they can pay attention to the natural palette. Designers use the unique characteristics of fur, giving it all kinds of colors, but still, many people buy natural shades.
All that remains is to go to the boutique and buy your favorite fur coat. It is advisable to look for them only in boutiques and salons, and not on the market. The buyer must request documents, pay attention to the presence of production labels, require a warranty certificate (min. 12 months) and, preferably, not look for discounts.
A high-quality fur coat should not be cheap, even if it is available on sale, because beavers are at the stage of being listed in the Red Book in many continents. And most importantly, there is no need to change your mind about buying exclusive beaver fur. It is profitable, and has a service life of up to twenty years (for example, a rabbit model looks neat for up to three years), so relative to the price/quality indicators, this organic alternative looks impressive. And also, a fur coat will always be warm, frosts are no longer dangerous.
Methods for home cleaning of beaver coats and their features
There are several ways to clean beaver fur at home. Subject to compliance with dosage requirements and specific handling of active ingredients, all of them are considered safe and effective.
We recommend: Not hot and not cold: what is the best insulation for clothes?
- If there is no desire or need to treat the fur coat completely, for example, you need to clean local surface contamination, you can use ammonia. We dilute two parts of ammonia with one part of water, moisten a soft cloth or lint-free towel in the resulting solution and gently rub off the stain. Then dry the area with a dry cloth and comb the fur.
Tip: After such exposure, the beaver's fur may fade a little. To eliminate the negative consequences, it is recommended to use medical glycerin. We apply it to a cotton pad and use it to treat the problem area.
- There is an excellent alternative to wet options for treating a beaver fur coat - hot sand treatment. It is perfect for both long and cropped fur. While staying at sea, you need to collect some fine sand without impurities in the form of stones. At home, we wash it again, dry it, and you can even bake it in the oven. We spread the product on a dense horizontal surface, fasten all the buttons, and level it out. Pour a generous layer of sand on top and spread it with your hands. Leave for several hours so that the grains of sand absorb all the dirt and grease. Then shake out the component and carefully comb the fur.
Some craftsmen even manage to clean a piece of clothing with dry shampoo for cats. The method is quite controversial, but according to reviews it is quite effective and affordable.
